GlobalMedia USB3.0 HD Video Conferencing Camera User Manual
qing
USB3.0 Type HD Video Conferencing
Camera
User Manual
V1.0
(English)
1
Preface
Thanks for using this USB3.0 HD Video Conferencing Camera.
This manual introduces the function, installation and operation of the HD camera. Prior to installation and
usage, please read the manual thoroughly.
Precautions
This product can only be used in the specified conditions in order to avoid any damage to the camera:
Don’t subject the camera to rain or moisture.
Don’t remove the cover. Otherwise, you may get an electric shock. In case of abnormal operation,
contact the authorized engineer.
Never operating under unspecified temperature , humidity and power supply;
Please use the soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neuter
detergent; do not use any type of solvents, which may damages the surface.
Note
This is class A production. Electromagnetic radiation at the specific frequency may affect the image quality
of TV in home environment.
2
Contents
1、 Note··································································································3
2、 Supplied Accessories··············································································4
3、 Quick Start··························································································5
4、 Features······························································································8
5、 Product Specification··············································································9
6、 Main Unit··························································································11
7、 IR Remote Controller Explanation···························································· 12
8、 Use IR Remote Controller······································································ 14
9、 RS-232 Interface··················································································17
10、 Serial Communication Control·································································19
11、 Menu Setting······················································································33
12、 Maintains and Trouble Shooting······························································· 38
3
Note
Electric Safety
Installation and operation must accord with electric safety standard.
Caution to transport
Avoid stress, vibration and soakage in transport, storage and installation.
Polarity of power supply
The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power supply plug
drawing as follows.
Careful of installation
Do not grasp the camera head when carrying the camera. Don’t turn camera head by hand. Doing so may
result in mechanical damage.
Don’t apply in corrosive liquid, gas or solid environment to avoid damaging the cover which is made up of
plastic material.
To make sure no obstacle in rotation range.
Never power on before installation is not completed.
Don’t dismantle the camera
We are not responsible for any unauthorized modification or dismantling.
CAUTION!
The specific frequency of electromagnetic field may affect the image of the camera!
4
Supplied Accessories
When you unpack, check that all the supplied accessories are included:
Camera ........................................1PCS
AC power adaptor ...................... 1PCS
Power cord....................................1PCS
RS232 cable..................................1PCS
Remote controller.........................1PCS
User manual ................................1PCS
5
Quick Start
Step1. Please check connections are correct before starting
6
Step2. Setting switches
Set both of the switch1 and switch2 to "OFF'. That is "Normal
Working Mode".
Step3. Setting of the system select switch
The option of video format:
VIDEO SYSTEM
0 - 8 -
1 - 9 -
2 1080i60 A -
3 1080i50 B -
4 720p60 C -
5 720p50 D 576i
6 1080p30 E 480i
7 1080p25 F -
CAUTION:
a. After changing the switch, you need to restart the camera to take effect.
Step4. Press the Switch ON/OFF button on the rear of the camera, the power lamp light.
Step5. Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center,
the process of initialization is finished. (Note: If the position preset 0 has been stored, the position preset 0 will be
called up after initialization)
SW-1 SW-2 Modes
1 OFF OFF Normal Working Mode
2 ON OFF
-
3 OFF ON
-
4 ON ON
-
7
Step6. (Optional) If you want to restore the factory default settings, Press [MENU] button to display the OSD
menu. Select the item [MENU] -> [RESTORE DEFAULT] -> [Restore]. Set the value [Yes], press [HOME]
button to restore the factory default settings.
RESTORE DEFAULT
Restore Yes
Change Value
[Home] OK
[Menu] Back
8
Features
1. Support USB3.0 transmission, the highest rate up to 5Gbps, ensure real-time lossless HD data
transmission.
2. Support HD USB3.0,HD-SDI(optional),Network stream, three-stream simultaneous output, compatible
with CVBS.
3. Adopt Panasonic's 1/3 inch, 2.12 million pixels high quality HD CMOS sensor, which can realize
maximum 1920 x 1080 high resolution image with high quality, maximum output frame rate reach 30 frames per
second.
4. High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm, effectively reduce the
noise, even under low illumination conditions, picture can still keep clean and clear, SNR more than 55dB.
5. Use TAMRON high quality super telephoto lens, support 20x optical zoom, and 16x digital zoom.
6. Using RS232/485 interface, all the parameters of the camera can be remote controlled by the high-speed
communications. Support Web control.
9
Product Specification
Name USB3.0 Type HD Color Video Camera
Camera
Video System
1080i/60,1080i/50, 1080p/30,
1080p/25, 720p/60, 720p/50,
NTSC, PAL
Sensor
1/3", CMOS, Total Pixel: 2.2M,
Effective Pixel: 2.12M
Sub stream
resolution
640x360,320x180
Scanning Mode Progressive Rate
128K,256K,384K,512K,768K,1024
K,1536K,2048K,3072K,4096K,
5120K,6144K,8192K Optional,
or Customed
Lens
20x, f4.42mm ~ 88.5mm, F1.8
~ F2.8
Rate control
Variable rate, fixed rate, fixed
quality
Digital Zoom 16x Maximun frame rate PAL:1-25, NTSC:1-30 is 30.
Minimal Illumination 0.5 Lux @ (F1.8, AGC ON) I frame interval
Customizable (greater than the
maximum frame rate)
Shutter 1/25s ~ 1/10000s Video format PAL,NTSC
White Balance
Auto, Indoor, Outdoor,
One-Push, Manual
Web frame Main frame,Sub frame
Backlight
Compensation
Support web video size
Appropriate size, original size,
full-screen
Digital Noise
Reduction
2D&3D Digital Noise
Reduction
HD Output
1xUSB3.0,B-type female
Video S/N ≥55dB
1xHDMI (Optional):Verision 1.3
Horizontal Angle of
View
60.7° ~ 3.36° SD Output
1xCVBS: RCA jack, 1Vp-p, 75Ω
Vertical Angle of View 34.1° ~ 1.89° Network interface
1xRJ45: 10M/100M Adaptive
Ethernet ports
10
Horizontal Rotation
Range
±170° Audio Input
1-ch 3.5mm audio interface, LINE
IN/LINE OUT
Vertical Rotation
Range
-30° ~ +90°
Control Input/Output
1xRS-232 IN: 8pin Min DIN, Max
Distance: 30m, Protocol: VISCA/
Pelco-D/Pelco-P
Pan Speed Range 1.7° ~ 100°/s
1xRS-485: 2pin phoenix port,
Max Distance: 1500m, Protocol:
VISCA/Pelco-D/Pelco-P
Tilt Speed Range 1.7° ~ 69.9°/s Power Connector
JEITA type (DC IN 12V)
Ceiling Installation Support Input Voltage 12V DC (10.8 ~ 13.0V DC)
Number of Preset 245 Current Consumption 2.0A (Max)
Preset Accuracy 0.1° Operating Temperature -5°C ~ 40°C
Video coding
standards
H264,JPEG Storage Temperature -20°C ~ 60°C
Video frame Main stream, Sub stream Power Consumption 18W (Max)
Main stream
resolution
1920x1080,1280x720 Dimensions 141mm x 169mm x 176mm
Weight 1.5Kg
11
Main Unit
1. Audio LINE IN Interface 7. RS232 IN jack
2. Audio LINE OUT Interface 8. RS232 OUT jack
3. CVBS Interface 9. Network
4. Dip switches 10. USB3.0
5. System select switch 11. DC 12V jack
6. RS485 jack 12. Power switch
13. HDMI
12
IR Remote Controller Explanation
0. Standby Button
Press this button to enter standby mode. Press it
again to enter normal mode.
(Note: Power consumption in standby mode is
approximately half of the normal mode)
1. Position Buttons
To set preset or call preset
2. * Button
3. Set/Clear Preset Buttons
Set preset: Store a preset position
[SET PRESET] + Numeric button (0-9): Setting a
corresponding numeric key preset position
Clear preset: Erase a preset position
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the
preset individually
4. BLC (Backlight Compensation) Button
BLC ON/OFF: Press this button to enable the
backlight compensation. Press it again to disable
the backlight compensation.(NOTE: Effective
only in auto exposure mode)
Note: If a light behind the subject, the subject will
become dark. In this case, press the backlight ON / OFF button. To cancel this function, press the backlight ON /
OFF button.
13
5. Focus Buttons
Used for focus adjustment.
Press [AUTO] adjust the focuses on the center of the object automatically. To adjust the focus manually, press the
[MANUAL] button, and adjust it with [Focus＋] (Focus on far object) and [Focus－] (Focus on near object)
6. Camera Select Buttons
Press the button corresponding to the camera you want to operate with the remote controller.
7. # Button
8. Pan/Tilt Control Buttons
Press arrow buttons to perform panning and tilting. Press [HOME] button to face the camera back to front
9. Menu Setting
Menu button: Press this button to enter or exit the OSD menu
10. Zoom Buttons
Zoom : Zoom In
Zoom : Zoom Out
11. Set Camera IR Address Buttons
[*]+[＃]+[F1]: Address1
[*]+[＃]+[F2]: Address2
[*]+[＃]+[F3]: Address3
[*]+[＃]+[F4]: Address4
14
USE IR Remote Controller
When the camera is working, you can use
remote controller to perform panning, tilting,
zooming and focusing, store and call back preset
positions.
Button Instruction：
1. In this instruction, ‘press the button’ means
the press and relax the two actions. Such as ‘press
[HOME] button’ means to press the [HOME] key
and then relax action, and a special note will be
given if a hold down for more than one second is
required.
2. When a button-combination is required, do it
in sequence. For example, ‘[*] + [#] + [F1]’means
press [*] first and then press [#] and press [F1] at
last.
1. Pan/Tilt Control
Move up: Press [ ]
Move down: Press [ ]
Move left: Press [ ]
Move right: Press [ ]
Face the camera back to front: Press [HOME]
Press and hold the up/down/left/right button,
the camera will keep rotating from slow to fast, until
it run to the mechanical limit; the camera stops as
soon as the button is released.
2. Zoom
Zoom Out: press [ZOOM ] button
Zoom In: press [ZOOM ] button
Press and hold the button, the camera will keep
zooming in or zooming out and it stops as soon as
the button is released.
16
3. Focus Control
Focus Far: Press [FOCUS+] button (NOTE:
Effective only in manual focus mode)
Focus Near: Press [FOCUS-] button (NOTE:
Effective only in manual focus mode)
Press and hold the button, the action of focus
continues and stops as soon as the button is released.
AUTO: Change focus mode to AF, adjusting the
focus automatically.
MANUAL: Change focus mode to MF, adjusting the
focus manually.
4. Backlight Switch
BLC ON/OFF: Press this button to enable the
backlight compensation. Press it again to disable the
backlight compensation. (Note: Backlight is only
effective in full auto exposure mode)
5. Presets Set/Clear
1. To store a preset position: The users should
press the [SET PRESET] button first and then press
the numeric button 0-9.
10 preset positions in total are available.
2. To erase the memory content of a preset
position: The users should press the [CLEAR
PRESET] button first and then press the numeric
button 0-9.
Note:
Press [*]+[#]+[CLEAR PRESET] will erase all
preset individually positions in the memory.
17
6. Recalling the Preset
Press any of the numeric buttons 0-9 directly to
recall stored preset positions and settings.
Note:
No action is executed if a relative preset
position is not stored.
7. Camera Selection
Press the button corresponding to the camera
you want to operate.
8. Camera IR Address Set
[*]+[＃]+[F1]: Address1
[*]+[＃]+[F2]: Address2
[*]+[＃]+[F3]: Address3
[*]+[＃]+[F4]: Address4
18
RS-232 Interface
Camera Windows DB-9
1.DTR 1.CD
2.DSR 2.RXD
3.TXD 3.TXD
4.GND 4.DTR
5.RXD 5.GND
6.GND 6.DSR
7.IR OUT 7.RTS
8.NC 8.CTS
9.RI
Camera Mini DIN
1.DTR 1.DTR
2.DSR 2.DSR
3.TXD 3.TXD
4.GND 4.GND
5.RXD 5.RXD
6.GND 6.GND
7.IR OUT 7.NC
8.NC 8.NC
No. Function
1 DTR
2 DSR
3 TXD
4 GND
5 RXD
6 GND
7 IR OUT
8 NC
19
VISCA Network Configuration
Loading...