GlobalMedia irez K2r Product Manual

K2r USB 2.0 from GlobalMedia Group, LLC.

Product Manual

Translations

• Spanish ……………… (pg 2-3)

• German ……………… (pg 4-5)

• Italian ……………… (pg 6-7)

• Portuguese ……………… (pg 8-9)

• Norwegian ……………… (pg 10-11)
Figure Page ……………… (pg 12-13)

• Russian ……………… (pg 14-15)

• French ……………… (pg 16-17)

• Japanese ……………… (pg 18-19)

• Korean ……………… (pg 20-21)

• Chinese (Simplified) …… (pg 22-23)

• Chinese (Traditional) …… (pg 24)

The K2r surpasses regular USB 1.0 cameras in image
quality and video performance. The K2r Camera displays
real-time, uncompressed video on your PC screen,
enabling you to have live, interactive video conferencing
with others over the Internet.

It’s easy to install, consumes little power, views
photographs in 1.6 million colors, and has a versatile,
patented claw. (US Patent #5,855,343) Reasonably priced
and quality-built, the K2r will become your favorite
camera to use for video conferencing!

Thank you for purchasing the K2r USB 2.0 Video Camera.

1. Install drivers from the CD

Minimum System Requirements

• Intel Pentium lll 500MHz processor or faster

• Microsoft Windows XP SP1 or 2000 SP3

• 128MB RAM (256MB Recommended)

• CD-ROM Drive or Internet access

• One Available USB 2.0 Port

• 160MB Free Hard Disk Space (260MB Recommended)

• If lower service packs are installed, your resolution will be limited to 160 x 120.
Check for the latest drivers from our website, http://www.globalmedia.com

Installation for Windows XP

1. Plug the your camera into a USB 2.0 port. If the Add New Hardware Wizard appears,
click Cancel. Otherwise skip the remaining steps.

2. Remove your camera from the USB 2.0 port.

3. Insert the included CD into your CD-drive.

4. Follow the on-screen instructions.

5. Plug your camera into the USB 2.0 port. Your camera is now ready to use.

Installation for Windows 2000

1. Insert the included CD into your drive. A welcome screen should popup, if it
does not, you’ll need to run setup.exe from your CD-drive. You can now follow
the on-screen instructions.

2. Once the installer is finished, remove the CD from your drive.

3. You can now plug your camera into a USB 2.0 port.

4. The "Found New Hardware Wizard" should popup. Click "Next". (Fig 1)

5. If a "Digital Signature not found" window comes up, click on "Continue Anyway". (Fig 2)

6. When informed that the "Wizard has finished installing the software for K2r"
click "Finish". (Fig 3)

7. If another New Hardware Wizard window appears, follow steps 4 through 6 again.

8. Right Click on "My Computer". Click Manage.

9. On the left hand side of the Computer Management console (Fig 4), click on
Device Manager. (Fig 4, D1)

10. On the right side of the Computer Management console, there is an alphabetical list of
devices on your computer (Fig 4). Double-click on the "Sound, video and game
controllers" line item. (Fig 4, D2)

11. Right click on "K2r Audio" or "USB Audio" and choose Disable.

12. Close all open windows.

Your K2r camera is ready for use!

English