Global Machinery Company POL1450 User Manual

POL1450

030901 Ed8 DR

Contents

Warranty 2
Introduction 3
Environmental protection 3
Description of symbols 3
Specifications 3
Safety instructions 4
Additional safety rules for sanders 5
Additional safety rules for angle grinders 6
Additional safety rules for polishers 7
Accessories 7
Unpacking 7
Know your product 8
Setting up 9
Operation in grinder mode 9
Operation in sander mode 11
Operation in polisher mode 12
Replacing the rubber disc 13
Maintenance 13
Cleaning 13
General inspection 13

2

Description of symbols

The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.

Wear hearing protection.
Wear eye protection.
Wear breathing protection.

Double insulated for additional protection.

Conforms to relevant standards for
electromagnetic compatibility.

Specifications

Nominal voltage: 230–240Vac ~ 50Hz
Input power: 1450W
No Load Speed: 1500–6500 RPM
Insulation class: Double Insulated
Disc size: 7”
Spindle: 15.88mm (M14)

3

Dear Customer

y

If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone [phone] in Australia or 0800 445 721 in
New Zealand.

Introduction

Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.

You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.

Caution. Carefully read through this entire Instruction

Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.

Your GMC power tool has many features that will make

our job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.

Environmental protection

Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.

Safety instructions

The tool must be used only for the prescribed purpose.
Any uses other than those mentioned in this manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse.

To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who
use and service the machine have to be acquainted with
this Manual and must be informed about its potential
hazards. Children and infirm people must not use this
tool. Children should be supervised at all times if they are
in the area in which the tool is being used. It is also
imperative that you observe the accident prevention
regulations in force in your area. The same applies for
general rules of occupational health and safety.

The manufacturer shall not be liable for any changes
made to the tool nor for any damage resulting from such
changes.

Warning. Before connecting a tool to a power source

(mains power point receptacle, outlet, etc.), be sure that
the voltage supply is the same as that specified on the
nameplate on the tool. A power source with a voltage
greater than that specified for the tool can result in
serious injury to the user, as well as damage to the tool.
If in doubt, do not plug in the tool. Using a power source
with a voltage less than the nameplate rating is harmful
to the motor.

Even when the tool is used as prescribed it is not possible
to eliminate all residual risk factors. The following hazards
may arise in connection with the tool’s construction and
design:

• Contact with the disc.

• Kickback of work piece and parts of work piece.

• Disc fracture.

• Catapulting of disc pieces.

• Damage to hearing if effective earmuffs are not worn.

• Do not use discs that are deformed or cracked.

• Always remove the plug from the mains socket before

making any adjustments or maintenance, including
changing the disc.

Warning. When using power tools, basic safety

precautions should always be taken to reduce the risk of
fire, electric shock and personal injury. Also, please read
and heed the advice given in the additional important
safety instructions.

1. Keep the work area clean and tidy. Cluttered work

areas and benches invite accidents and injury.

2. Consider the environment in which you are working.

Do not use power tools in damp or wet locations. Keep
the work area well lit. Do not expose power tools to
rain and high humidity. Do not use power tools in the
presence of flammable liquids or gases.

3. Keep visitors away from the work area. All visitors

and onlookers, especially children and infirm persons
should be kept well away from where you are working.
Do not let others in the vicinity make contact with the
tool or extension cord.

4. Store tools safely. When not in use, tools should be

stored in a dry, high place or locked up out of reach.

5. Do not force the tool. The tool will do the job better

and safer working at the rate for which it was
designed.

6. Use the correct tool for the job. Do not force small

tools or attachments to do the job best handled by a
heavier duty tool. Never use a tool for a purpose other
than that for which it was intended.

7. Dress correctly. Do not wear loose clothing or

jewellery. They can be caught in moving parts. Rubber
gloves and non-slip footwear are recommended when
working outdoors. If you have long hair, wear a
protective hair covering.

8. Use safety accessories. Safety glasses and earmuffs

should always be worn. A face or dust mask is also
required.

4

9. Connect dust extraction equipment. If devices are

provided for the connection of dust extraction and
collection facilities, ensure that these are connected
and properly used.

10. Do not abuse the power cord. Never pull the cord to

disconnect the tool from the power point. Keep the
cord away from heat, oil and sharp edges.

11. Secure the work piece. Use clamps or a vice to hold

the work piece. It is safer than using your hand and
frees both hands to operate the tool.

12. Do not overreach. Keep your footing secure and

balanced at all times.

13. Look after your tools. Keep tools clean and sharp for

better and safer performance. Follow the instructions
regarding lubrication and accessory changes. Inspect
tool cords periodically and, if damaged, have them
repaired by an authorised service facility. Inspect
extension cords periodically and replace them if
damaged. Keep tool handles dry, clean and free from
oil and grease.

14. Disconnect idle tools. Switch off the power and

disconnect the plug from the power point before
servicing, when changing accessories and when the
tool is not in use.

15. Remove adjusting keys and wrenches. Form the

habit of checking to see that keys and adjusting
wrenches are removed from the tool before switching
it on.

16. Avoid unintentional starting. Always check that the

switch is in the OFF position before plugging in the
tool to the power supply. Do not carry a plugged in
tool with your finger on the switch.

17. Use outdoor rated extension cords. When a tool is

used outdoors, use only extension cords that are
intended for outdoor use and are so marked.

18. Stay alert. Watch what you are doing. Use common

sense. Do not operate a power tool when you are
tired.

19. Check for damaged parts. Before using a tool, check

that there are no damaged parts. If a part is slightly
damaged, carefully determine if it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, proper mounting and any other
conditions that may affect the operation of the tool.
A part that is damaged should be properly repaired or
replaced by an authorised service facility, unless
otherwise indicated in this Instruction Manual.
Defective switches must be replaced by an authorised
service facility. Do not use a tool if the switch does
not turn the tool on and off correctly.

20. Guard against electric shock. Prevent body contact

with grounded objects such as water pipes, radiators,
ranges and refrigerator enclosures.

21. Use only approved parts. When servicing, use only

identical replacement parts. Use an authorised service
facility to fit replacement parts.

Warning. The use of an accessory or attachment, other

than those recommended in this Instruction Manual, may
present a risk of personal injury.

Additional safety rules for angle grinders

• Fully unwind cable drum extensions to avoid potential

overheating.

• When an extension cable is required, you must ensure

that it has the right ampere rating for your power tool
and is in safe electrical condition.

• Always switch off before you put the angle grinder

down.

• Do not let anyone under 18 years operate this tool.

• Rags, cloths, cord, string and the like should never be

left around the work area.

• If you are interrupted when operating the tool,

complete the process and switch off before looking up.

• Periodically check that all nuts, bolts and other fixings

are properly tightened.

5