Page 1
MRHD1500CF
“
SUPER BLAST” Rotary Hammer Drill
SUPER BLAST
Page 2
Introduction
Packing Plenty of Punch
If you have a lot of masonry drilling applications then save time and energy with the
all new GMC MRHS1500CF Rotary Pneumatic Hammer with it’s high powered 1500W
motor providing the muscle behind an impressive 3.5J of impact force. A combination
of Carbon Fibre and Magnesium construction offers the very latest in manufacturing
materials that maximise strength and durability in a lighter powertool.
An increased range of applications are made possible by the 3 modes of operation
including Non Impact drilling, Impact Drilling and Stop Rotation which is used for
chiselling to remove tiles and the breaking up of concrete. SDS Plus bit fitment
provides for a reliable and fast method of fitting your accessories while safety features
include a built in safety clutch and “Power Glow” to indicate when power is available
3 Times More Efficient
Rotary Pneumatic Hammer drills are far more efficient over the standard impa ct
action hammer drill by around 3 times and there-for are generally used specifically for
masonry drilling and chiselling applications. Comparing this efficiency in hammer
action between the 2 types, would be like comparing a mash hammer to a sledge
hammer!
MRHD1500CF – “Super Blast” Rotary Hammer Drill
Page 3
Key Features & Benefits
Super Powerful 1500w Motor
Ample power to drive the rotary pneumatic mechanism to deliver an impressive
3.5J of impact force. Hence the name “Super Blast”
Carbon Fibre & Magnesium Construction
Delivering the latest in manufacturing technology for exception durability and
strength whilst delivering the lightest possible construction at around 5.2kgs.
3 Mode’s of Operation
1. Drilling with no hammer action
2. Drilling with hammer action
3. Hammer action with no rotation, used for chiselling
SDS Plus Bit Change System
For rapid accessory changes with a mechanism designed to withstand the massive
impact force required for this type of concrete and masonry work tool
Safety Clutch System
This protects the operator in the event that the accessory is jammed
Variable Speed
Allows for total control when used for drilling applications
MRHD1500CF – “Super Blast” Rotary Hammer Drill
Page 4
Internal safety clutch to
protect the operator in
SDS-Plus fitment
system for rapid tool
free bit changes with
maximum energy
transfer rate
Key Features
case of jammed bits
Variable speed for
optimum control and
penetration for various
materials.
3 Way Mode Selector
for rapid changing of
the various functions
360˚ Adjustable side
handle with depth
gauge allowing for use
in the most convenient
position
MRHD1500CF – “Super Blast” Rotary Hammer Drill
Page 5
Typical Applications
•Demolition of concrete slabs and brick walls
• Chasing (channelling) of concrete to run cables and pipe
• Lifting of tiles and pavers
•Conventional masonry drilling
• Conventional Steel & Wood drilling using the keyed chuck adaptor
3BVSIPCF – Unlimited Rebate Planer
Page 6
Specification Sheet
Technical Specifications
Input Power 750watts
No Load Speed 500 - 15,000rpm
Impacts Per Minute 880 – 2700bpm
Bit Fitment SDS-Plus
Impact Force 3.5joules
Modes of Operation 2
Max Drilling Capacity
into Masonry
Construction Carbon Fibre & Magnesium
Net Weight 5.2kgs
36mm
Supplied Accessories
1 x 13mm Keyed Chuck
1 x Grease Pot
1 x Side Handle & Depth Rod
1 x Pin Wrench
1 x Carry Case
Warranty 2 Year Repair or Replacement
for Domestic Home Use
MRHD1500CF – “Super Blast” Rotary Hammer Drill
Page 7
Operating Tips
1. That the more downward force you apply to the tool, the less efficient they
are in their operation.
2. Some machines from new may not engage the hammer function and require
a solid tap to a hard surface to the tip of a bit which has been fitted to the
tool. Rarely would this ever need to be done again
3. When performing overhead work always use the supplied rubber dust chuck
cover. Masonry dust is both fine and very abrasive and will finds it’s way into
the machines internals and damage the mechanism
4. Ensure you top up the gearbox grease according to the instruction manual.
With prolonged use, the internal grease heats up and softens and slowly
makes it’s way out through the chuck sleeve.
5. When using the metal chuck adaptor, remember this is for non masonry
drilling only! The high impact generated by rotary hammer drills will
disintegrate the chuck in a short period of time.
MRHD1500CF – “Super Blast” Rotary Hammer Drill
Page 8
Frequently Asked Questions
Q: How does a Rotary Hammer drill work?
A: A small piston operated by the electric motor pushes compressed air against a
metal spring loaded plate which in turn heavily impacts with the drive shaft
connected to the chuck. Each single impact of energy delivered is measured in
“Joules”
NB: A joule is the work done or energy required to exert a force of one newton for a distance of 1mtr.
Q: What is SDS all about?
A: An acronym for “Stick Rotate Seat” , though there are many other versions and it’s
difficult to know which is correct. It was system developed by Bosch which there are
several forms available such as SDS, SDS PLUS and SDS MAX. Basically the difference is
their increased duty rating and size of the associated bits. Because of this special
fitment, a “Chuck Adaptor” must be fitted to be able to use standard round shank drill
bits.
SDS Fitment Slots
MRHD1500CF – “Super Blast” Rotary Hammer Drill
Loading...