Global Machinery Company LS750P JM User Manual
750W
MAGNESIUM
JIGSAW
LS750PJM
INSTRUCTION MANUAL
1
Contents
Warranty Power Tools
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase.
If found to be defective in materials or workmanship,
the tool or the offending faulty component will be repaired
or replaced free of charge with another of the same item.
A
small freight charge may apply. Proof of purchase is
essential. We reserve the right to reject any claim where
the purchase cannot be verified.
This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use. It also does not
cover any bonus items or included accessories. Only the
powertool is covered under this warranty.
With continuing product development, changes may have
occurred which render the product received slightly
different to that shown in this instruction manual.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty. For full details of
the warranty terms and conditions please refer to our
website – www.gmcompany.com
For prompt service we suggest you log your service
request online - www.gmcservice.com.au, should you
not have access to the internet, please contact our
service department on 1300 880 001 (Australia)
or 0800 445 721 (New Zealand).
Warranty 2
Description of symbols 3
Specifications 3
Safety rules for laser lights 4
General safety rules 4
Additional safety rules for jigsaws 6
Contents of carton 6
Unpacking 6
Assembly 6
Know your product 7
Adjusting the shoe for angular cutting 8
Switching the jigsaw on/off 8
Adjusting the cutting speed 8
Pendulum adjustment 8
Making a cut 9
Pocket & round cutting 9
Cutting metal 9
Parallel fence 9
Blade guide 9
Changing a blade 9
Dust extraction adaptor 10
Blade storage 10
Using the REDEYE
Maintenance 10
Power cord maintenance 11
General inspection 11
®
laser line system 10
2
Description of symbols
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way
.
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
WARNINGS
1. It may be more difficult to see the laser line in
conditions of bright sunshine and on certain surfaces.
2. When storing the tool, remove the batteries in case
of leakage.
3. Batteries or damage due to leaking batteries are not
covered under warranty.
Conforms to relevant standards
for electromagnetic compatibility.
Specifications
Voltage: 230–240V ~ 50 Hz
Power input: 750W
No load speed: 800 to 3000 min
Blades: ‘U’ and ‘T’ Shank blades
Pendulum: 3 Stage
Cutting angle range: 0° to 45°, left and right
Cutting depth in:
Wood: 100mm
Steel: 8mm
Sound pressure level: 94.5 dB(A)
Weight: 2.7 kg
Laser class: 2
Laser wavelength: 400–700nm
Laser output power: ≤1mw
3
-1
Safety rules for laser lights
LASER LIGHT. LASER RADIATION
Do not stare into beam. Class 2 laser product
Wave Length:400-700nm, Output Power: 1mW
AS/NZS2211.1:2004
The laser light/laser radiation used in the GMC REDEYE®
system is Class 2 with maximum ≤1mW and 400 – 700nm
wavelength. These lasers do not normally present an optical
hazard, although staring at the beam may cause flash
blindness.
WARNING. Do not stare directly at the laser beam.
A hazard may exist if you deliberately stare into the beam,
please observe all safety rules as follows;
• The laser shall be used and maintained in accordance
with the manufacturer’s instructions.
• Never aim the beam at any person or an object other
than the work piece.
• The laser beam shall not be deliberately aimed at
personnel and shall be prevented from being directed
towards the eye of a person for longer than 0.25s.
• Always ensure the laser beam is aimed at a sturdy work
piece without reflective surfaces. i.e. wood or rough
coated surfaces are acceptable. Bright shiny reflective
sheet steel or the like is not suitable for laser use as
the reflective surface could direct the beam back at the
operator.
• Do not change the laser light assembly with a different
type. Repairs must only be carried out by the laser
manufacturer or an authorised agent.
CAUTION. Use of controls or adjustments or performance
of procedures other than those specified herein may result
in hazardous radiation exposure.
Please refer to the relevant Australian standards, AS 2397
and AS/NZS 2211 for more information on Lasers.
General safety rules
WARNING. Read all instructions. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term “power tool” in all of
the warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless)
power tool.
Save these instructions
1. Work area
a. Keep work area clean and well lit.
Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres,
such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c. Keep children and bystanders away while
operating a power tool.
Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
4
Loading...