Global Machinery Company BS900M User Manual

1

MAGNESIUM
BELT SANDER

BS900M
INSTRUCTION MANUAL

Black

Cyan

Magenta

Yellow

Code: BS900M

Date:

060224 Edition: 03 Op: DCR

2

Contents

Full 2 Years Home Use Warranty

Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.

This product is warranted for a 2-year period for home
domestic use from the date of the original purchase. If
found to be defective in materials or workmanship, the tool
or the offending faulty component will be replaced free of
charge with another of the same item.

A small freight

charge may apply

.

The warranty replacement unit is only made available by
returning the tool to the place of purchase with a confirmed
register receipt. Proof of purchase is essential. We reserve
the right to reject any claim where the purchase cannot be
verified.

This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use.

It also does not cover any bonus accessories unless the
tool is a GMC Platinum Professional model.

Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty

.

If you need direction of what constitutes a free of charge
warranty claim, please review the guide given on the rear
of the Receipt Holder. An indication is given as to the types
of claim that are permissible, and those that are not.

Warranty 2

Introduction 3

Environmental protection 3

Description of symbols 3

Specifications 3

Safety instructions 4

Additional safety rules for sanders 5

Unpacking 6

Contents of carton 6

Assembly 6

Know your product 7

Switching on and off 8

Adjusting the speed 8

Attaching a sanding sheet 8

Selecting the right grade of sanding belt 8

Sanding 9

Using the sanding frame 9

Dust extraction 10

General inspection 10

Cleaning 10

3

Description of symbols

The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.

Wear hearing protection.
Wear eye protection.
Wear breathing protection.

Double insulated for additional protection.

Conforms to relevant standards
for electromagnetic compatibility.

Specifications

Voltage: 230–240Vac ~ 50 Hz

Input power: 900W

No load speed: 260 – 360min

-1

Insulation: Double insulated

Sanding area: 76mm x 140mm

Belt size: 76mm x 533mm

Weight: 4.9kg

Sound pressure level: 87.7dB(A)

Dear Customer

If you require any help with your product, whether it �
is a Warranty claim, spare part or user information,

�
please phone our Help Line for an immediate response.
Phone [phone] in Australia or

�

0800 445 721 in New Zealand.

Introduction

Your new GMC power tool will more than satisfy �
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.

You will find your new tool easy and safe to operate, �
and, with proper care, it will give you many years

�

of dependable service.

CAUTION. Carefully read through this entire Instruction

Manual before using your new GMC Power

Tool. Take

special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make

your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain

�

and operate.

Environmental protection

Recycle unwanted materials instead �
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way

.

4

Safety instructions

WARNING. Read and understand all instructions.

Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury. The term
“power tool” in all of the warnings below refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

Save these instructions
Work area

• Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

• Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases,
or dust.

Power tools create sparks which may ignite the

dust or fumes.

• Keep children and bystanders away while operating

a power tool.

Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and
refrigerators.

There is an increased risk of electric shock

if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of
electric shock.

• Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an

outdoor extension cord suitable for outdoor use.

Use
of a cord suitable for outdoor use reduces the risk of
electric shock.

Personal safety

• Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or under
the influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in
serious personal injury.

• Use safety equipment. Always wear eye protection.

Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.

• Avoid accidental starting. Ensure the switch is in the

off-position before plugging in. Carrying power tools with
your finger on the switch or plugging in power tools that
have the switch on invites accidents.

• Remove any adjusting key or wrench before turning

the tool on.

A wrench or a key that is left attached to a

rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in
unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities ensure that these
are connected and properly used.

Use of these

devices can reduce dust-related hazards.

Power tool use and care

• Do not force the power tool. Use the correct power

tool for your application.

The correct power tool will
do the job better and safer at the rate for which it
was designed.

• Do not use the power tool if the switch does not turn

it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.