Global Machinery Company 3G24VM, 3G144V, 3G18V, 3G24V, 3G12V User Manual

...

CORDLESS 3 GEAR HAMMER DRILL

3G12V, 3G144V, 3G18V, 3G18VM, 3G24V, 3G24VM INSTRUCTION MANUAL

Contents

Warranty Power Tools

Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service department.

This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be repaired or replaced free of charge with another of the same item.

small freight charge may apply. Proof of purchase is essential. We reserve the right to reject any claim where the purchase cannot be verified.

This warranty does not include damage or defects to the tool caused by or resulting from abuse, accidents, alterations or commercial or business use. It also does not cover any bonus items or included accessories. Only the powertool is covered under this warranty.

With continuing product development, changes may have occurred which render the product received slightly different to that shown in this instruction manual.

Please ensure that you store your receipt in a safe place. Conditions apply to the above warranty. For full details of

the warranty terms and conditions please refer to our website – www.gmcompany.com

For prompt service we suggest you log your service request online - www.gmcservice.com.au, should you not have access to the internet, please contact our service department on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).

Warranty 2 Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 4 General safety rules 5 Additional safety instructions for drills 6 Additional safety instructions for charger 7 Additional safety instructions for battery pack 8 Unpacking 8 Know your product 9 Adjustable side handle 10 Inserting and removing bits 10 Fitting and removing the battery pack 10 Battery charging 11 To obtain the best life for the battery 11 Battery indicator 11 LED Work area light 12 Trigger switch 12 Forward/Reverse control 12 Variable speed 12 Drilling positions 12 Torque adjustment/hammer selection collar 13 3 Speed gearbox 13 Screw driver bit storage 13 Chuck replacement 13 Drilling metals 14 Drilling plastics and plastic coated chipboard 14 Drilling masonry 14 Drilling wood 14 All drilling operations 14 Care 15 Maintenance 15 Power cord maintenance 15

Introduction

Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.

You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire Instruction

Manual before using your new GMC Power Tool. Take special care to heed the Cautions and Warnings.

Your GMC power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Environmental protection

Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way

Description of symbols

The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.

Wear hearing protection. Wear eye protection. Wear breathing protection.

Double insulated for additional protection.

Conforms to relevant standards for electromagnetic compatibility.

Specifications

3G12V 3G144V 3G18V/3G18VM 3G24V/3G24VM

Charger

Charging time

Batteries

Nominal battery voltage

Gear

Switch

Torque settings

Drill chuck capacity

Weight

Maximum torque

Maximum drill no-load speed

Low

Medium

High

Hammer impact frequency

Low

Medium

High

Maximum drilling capacity

Steel

Wood

Concrete

230 – 240 Vac, 50Hz 45W 14Vdc, 2A

1 Hour 1 Hour 1 Hour 1 Hour

2 x 1.5Ah 2 x 1.5Ah 2 x 1.7Ah 2 x 1.7Ah

12V 14.4V 18V 24V

Three speed Three speed Three speed Three speed

Variable speed Variable speed Variable speed Variable speed

20 positions 20 positions 20 positions 20 positions

10mm Keyless 10mm Keyless 13mm Keyless 13mm Keyless

2.4kg 2.5kg 2.9kg 3.2kg

17.65 Nm 20.6 Nm 36.3 Nm 45.15 Nm

0 – 330min

0 – 570min

0 – 1300min

0 – 4950 BPM 0 – 5775 BPM 0 – 5775 BPM 0 – 6000 BPM

0 – 8550 BPM 0 – 10050 BPM 0 – 10050 BPM 0 – 10500 BPM

0 – 19500 BPM 0 – 22500 BPM 0 – 22500 BPM 0 – 24000 BPM

10mm 10mm 13mm 13mm

25mm 28mm 38mm 38mm

10mm 10mm 13mm 13mm

230 – 240 Vac, 50Hz 50W 17Vdc, 2A

-1

0 – 385min

0 – 670min

0 – 1500min

-1

230 – 240 Vac, 50Hz 65W 21Vdc, 2.1A

0 – 385min

0 – 670min

0 – 1500min

-1

230 – 240 Vac, 50Hz 85W 28Vdc, 2.3A

0 – 400min

0 – 700min

0 – 1600min

-1

General safety rules

WARNING. Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Save these instructions

1. Work area a. Keep work area clean and well lit.

areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating

a power tool.

2. Electrical safety a. Power tool plugs must match the outlet. Never modify

the plug in any way.

earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase the

risk of electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

suitable for outdoor use reduces the risk of electric shock.

Distractions can cause you to lose control.

Do not use any adapter plugs with

Cluttered and dark

Use of a cord

3. Personal safety a. Stay alert, watch what you are doing and use

common sense when operating a power tool.

not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the

off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before

turning the power tool on.

attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery.

moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are connected and properly used.

can reduce dust related hazards.

4. Power tool use and care a. Do not force the power tool.

for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn

it on and off.

with the switch is dangerous and must be repaired.

Keep your hair, clothing and gloves away from

Any power tool that cannot be controlled

A wrench or a key left

Use of these devices

Use the correct power tool

+ 11 hidden pages