Global Machinery Company 2000W User Manual

1
2000W
BLOWER VACUUM MULCHER
BLV2000A INSTRUCTION MANUAL
Cyan
Magenta
Yellow
Code: BLV8000A IM
Date: 070528 Edition: 03 Op: PS
2
Contents
Warranty Power Tools
Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service department.
This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be repaired or replaced free of charge with another of the same item.
A
small freight charge may apply. Proof of purchase is essential. We reserve the right to reject any claim where the purchase cannot be verified.
This warranty does not include damage or defects to the tool caused by or resulting from abuse, accidents, alterations or commercial or business use. It also does not cover any bonus items or included accessories. Only the power tool is covered under this warranty.
With continuing product development, changes may have occurred which render the product received slightly different to that shown in this instruction manual.
Please ensure that you store your receipt in a safe place. Conditions apply to the above warranty. For full details of
the warranty terms and conditions please refer to our website – www.gmcompany.com
For prompt service we suggest you log your service request online - www.gmcservice.com.au, should you not have access to the internet, please contact our service department on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).
Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 3 Safety instructions 4 Additional safety rules for garden vacs 5 Unpacking 6 Contents 6 Know your product 7 Preparation of the blower vac prior to use 8 Extending the telescopic blower vac tube 8 To fit the collection bag 8 To remove the collection bag 9 Shoulder strap 9 Operation of the blower vac 9 Extension cord support 9 Selecting the blowing operation 10 Selecting the vacuum operation 10 Important notes when using the
blower/vacuum selector lever 10 To empty the collection bag 10 Tips for using your blower vac 10 Maintenance and storage information 11 Power cord maintenance 11
3
Description of symbols
The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.
Wear hearing protection. Wear eye protection. Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards for electromagnetic compatibility.
Warning.
Read the instruction manual carefully
WARNING. Do not use in the rain, or leave outside
while it is raining.
WARNING. Keep spectators away.
Beware of objects being flung out.
WARNING. Remove the plug from the wall socket
before carrying out any kind of maintenance
WARNING. Rotating blades. WARNING. Do not put hands or feet under the
cover of the machine when it is running
Introduction
Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.
You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way
.
Specifications
Voltage: 230–240 Vac ~ 50Hz
Input Power: 2000W
Speed: 13000 min
-1
Air Speed: 230 km/h
Collection Bag Capacity: 40 Litre
Mulching Ratio: 10:1
Insulation: Double insulated
Tool Weight 4.2kg
4
Safety instructions
WARNING. Read and understand all instructions.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains­operated (corded) power tool or battery-operated (cordless) power tool.
This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the appliance.
Save these instructions Work area
Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities ensure that these are connected and properly used. Use of these
devices can reduce dust-related hazards.
Loading...
+ 8 hidden pages