Global Machinery Company 18VDT18V User Manual

18V

CORDLESS DRILL/DRIVER

18VDT-D INSTRUCTION MANUAL

Black

Cyan

Magenta

Yellow

Code: 18VDT-D Drill IM

Date: 070511 Edition: 08 Op: GM

Contents

Warranty 2 Environmental protection 3 Description of symbols 3 Specifications 3 General safety rules 4 Additional safety instructions for drills 5 Additional safety instructions for charger 6 Additional safety instructions for battery pack 7 Unpacking 8 Know your product 9 Fitting and removing the battery pack 10 Battery charging 10 To obtain the best life for the battery 10 Using the drill

11 Chuck replacement 11 Forward/Reverse control 11 Inserting and removing bits 11 Adjustment torque 12 Drilling metals 12 Drilling plastics and plastic coated chipboard 12 Drilling masonry 12 Drilling wood 12 Maintenance 12

Warranty Power Tools

Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service department.

This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be repaired or replaced free of charge with another of the same item.

small freight charge may apply. Proof of purchase is essential. We reserve the right to reject any claim where the purchase cannot be verified.

This warranty does not include damage or defects to the tool caused by or resulting from abuse, accidents, alterations or commercial or business use. It also does not cover any bonus items or included accessories. Only the power tool is covered under this warranty.

With continuing product development, changes may have occurred which render the product received slightly different to that shown in this instruction manual.

Please ensure that you store your receipt in a safe place. Conditions apply to the above warranty. For full details of

the warranty terms and conditions please refer to our website – www.gmcompany.com

For prompt service we suggest you log your service request online - www.gmcservice.com.au, should you not have access to the internet, please contact our service department on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).

Description of symbols

The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.

Wear hearing protection. Wear eye protection. Wear breathing protection.

Conforms to relevant safety standards.

For indoor use only.

Isolating transformer.

Double insulated for additional protection.

Conforms to relevant standards for electromagnetic compatibility.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Read the instruction manual.

Fusable link rated at 130°C.

Polarities of DC connector.

Cadmium contained battery should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Specifications

Charger Input: 230–240V ~ 50 Hz

Nominal battery voltage: 18V

No load speed: 0–650min

-1

Drill chuck capacity: 1 - 10mm

Torque settings: 16+1

Charging time: 5–7 hours

Tool weight: 1.7kg

Dear Customer

If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand.

Introduction

Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.

You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire Instruction

Manual before using your new GMC Power Tool. Take special care to heed the Cautions and Warnings.

Your GMC power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Environmental protection

Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way

130˚C

General safety rules

WARNING. Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Save these instructions

1. Work area a. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

2. Electrical safety a. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

3. Personal safety a. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the

off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are connected and properly used. Use of these devices

can reduce dust related hazards.

4. Power tool use and care a. Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before

making any adjustments, changing accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

5. Battery tool use and care a. Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

b. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with another battery pack.

c. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

d. When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

e. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6. Service a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety rules for drills

• Wear ear protectors with impact drills. Exposure to noise

can cause hearing loss.

• Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

• If possible, always use clamps or a vice to hold your work.

• Always switch off before you put the drill down.

• Ensure that the lighting is adequate.

• Do not put pressure on the drill, such that it slows the

motor down. Allow the drill bit to cut without pressure. You will get better results and you will be taking better care of your tool.

• Keep the area free of tripping hazards.

• Do not let anyone under 18 years operate this tool.

• Only use accessory bits in good condition.

• Before drilling, check that there is sufficient clearance for

the drill bit under the workpiece.

• Do not touch the bit after operation. It will be very hot.

• Keep your hands away from under the workpiece.

• Never use your hands to remove sawdust, chips or waste

close by the bit.

• Rags, cloths, cord, string and the like should never be left

around the work area.

• Support the work properly.

• If you are interrupted when operating the drill, complete

the process and switch off before looking up.

• Periodically check that all nuts, bolts and other fixings are

properly tightened.

• When using the drill, use safety equipment including

safety glasses or shield, ear defenders, and protective clothing including safety gloves. Wear a dust mask if the drilling operation creates dust.

If in doubt, do not plug in the tool. Using a power source with a voltage less than the nameplate rating is harmful to the motor.

The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards.

Children and frail people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

Additional safety instructions for the charger

• Before using the charger, read all the instructions and

cautionary markings on the charger and battery pack as well as the instructions on using the battery pack.

• Only charge your batteries indoors as the charger is

designed for indoor use only.

• DANGER. If the battery pack is cracked or damaged in

any other way, do not insert it in the charger. There is a danger of electric shock or electrocution.

• WARNING. Do not allow any liquid to come into contact

with the charger. There is a danger of electric shock.

• To allow the battery pack to cool down after charging, do

not place it in a hot environment such as a metal shed or open trailer left in the sun.

• Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

• The charger and battery packs supplied with it are

specifically designed to work together. Do not attempt to charge the battery pack with any other charger than the one supplied.

• Do not place any object on top of the charger as it could

cause overheating. Do not place the charger near any heat source.

• Do not pull on the lead of the charger to disconnect it

from the power source.

• Make sure that the charger cable is positioned where

it will not be stepped on, tripped over or otherwise subjected to damage or stress.

• Do not use an extension cord unless it is absolutely

necessary. The use of an improper extension cord could cause the risk of fire, electric shock or electrocution.

• Do not use the charger if it has been subjected to a

heavy knock, dropped or otherwise damaged in any way. Take the charger to an authorised service centre for a check or repair.

• Do not disassemble the charger. Take it to an authorised

service centre when service or repair is required. Incorrect re-assembly may result in the risk of fire, electric shock or electrocution.

• To reduce the risk of an electric shock, unplug the

charger from the power supply before attempting to clean it. Removing the battery alone does not reduce the risk.

• Never attempt to connect two chargers together.

• Do not store or use the tool and battery pack in locations

where the temperature may reach or exceed 104°F (40°C) such as alongside sheds or metal structures in the summer.

• The charger is designed for use from a standard

household electrical supply (230–240 volts). Do not attempt to connect the charger to a supply with a different supply.

• If you wish to charge a second battery pack, unplug the

charger from the mains supply and leave it for at least 15 minutes. After this time you can charge a second battery pack

Additional safety instructions for the battery pack

• The battery pack for this tool has been shipped in a low

charge condition. You should charge the battery pack fully before use.

• Ensure the switch is in the off position before inserting

battery pack. Inserting the battery pack into power tools that have the switch on invites accidents.

• Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk of injury and fire.

• To ensure the longest battery life and best battery

performance, always charge the battery when the air temperature is between 18–24°C. Do not charge the battery pack when the temperature is below 0°C, or above 40°C. This is important. Failure to observe this safety rule could cause serious damage to the battery pack.

• When battery pack is not in use keep it away from other

metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Do not incinerate the battery pack even if it is seriously

damaged or can no longer hold a charge. The battery pack can explode in a fire.

• Never attempt to open the battery pack for any reason.

If the plastic housing of the battery pack breaks open or cracks, immediately discontinue its use and do not recharge it.

• Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

• The battery pack utilizes nickel-cadmium cells. Cadmium is

considered to be a toxic material. Use an environmentally safe disposal unit at a municipal waste disposal centre to dispose of a damaged or worn out battery.

The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:

• Damage to the lungs if an effective dust mask is not worn.

• Damage to hearing if effective earmuffs are not worn.

Unpacking

Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Contents of carton

• 18V Drill/Driver

• 18V Battery

• Charger

+ 17 hidden pages