Global Industrial 761224GN, 761224BL, 761224, 761224BK User Manual

globalindustrial.ca

Instruction Manual Manual de Instrucciones Manuel d'instruction

Distribucion Industrial Globales S DE RL DE CF

Customer Service

US: 1-800-645-2986

Servicio de atención al Cliente

México: 01.800.681.6940

Service à la clientèle

Canada: 888-645-2986

Outdoor Wall Mounted Drinking Fountain

WARNING

• All installation work must be performed
by authorized service personnel.

• Two or more people are recommended
to lift and install the unit.

• To avoid the risk of property damage
and/or personal injury, mount this fountain
to a flat finished wall surface adequate to
support up to 300 lbs.

• Check local codes for plumbing
requirements prior to installation.

• Refer to Rough-In Guide (page 4)

Models 761224, 761224BK,

761224BL & 761224GN

• DO NOT attempt to repair or replace any part of this fountain unless it is specifically
recommended in this manual. All other services should be referred to a qualified technician.

• For use with clean, clear potable drinking water only.

• Shut-off water supply during installation to reduce the risk of water damage.

• Freezing Caution: Before freezing temperatures occur, refer to the Draining and
Winterization section of this manual (page 11) for proper preparation.

• Installation of a trap on the water drain line may be necessary; remove trap before
winterization draining.

• Failure to follow safety warnings and/or installation instructions will void warranty.

prior to installation.

• Thoroughly flush all water supply lines of all
foreign matter before connecting to the fixture.

• Check for any leaks before use.

NOTE: Included are the necessary vandal-resistant stainless steel bolts and washers needed
to anchor this unit to the wall. Installer must provide a 1-1/2” PVC drain line (if applicable) and

water supply line. All connections are made inside the item through the access door, as shown

in the drawings. It is recommended to install a shut-off valve (not included) on the water supply.

1

Outdoor Wall Mounted Drinking Fountain

Instruction Manual

DRAIN

DRAIN PAN

BUBBLER

DRINKING FOUNTAIN

PUSH BUTTON

MOUNTING PLATE

COLOR OPTIONS:

SS316
SS316 GREEN
SS316 BLACK
SS316 BLUE

WWW.GLOBALINDUSTR IAL . C O M

Package Contents:

- Fountain

- Bubbler

- Hardware Bag

2

SPECIFICATIONS

Features :

316 Stainless , Lam inar Flow, Heavy Duty, Vandal Resistant

Finis h: SS Finish, Black(BK), Blue(BL), Green(GN)

Power: No Electrical Required

Bubbler Vandal Resistant

Activation Type: Push Button

Mounting Type: Wall Mount

Product Dimensions:

10-1/4"L x 16-1/4"W x 7-1/4"H

Weight: 21 lbs.

Installation Location: Outdoor

No. of Stations: 1

PART BREAKDOWN

Ref. Qty. Descrip�on

Outdoor Wall Mounted Drinking Fountain

Instruction Manual

H1 1

H2 1

H3

H4 1 Bubbler

REQUIRED TOOLS

Torx Key Wrench

Torx Drill Bit

4

Anchor Kit

Safety Gloves

Safety Glasses

Adjustable Wrench

Small Flathead

Screwdriver

3

15-17mm
Wrench

Hammer

Phillips-Head

Screwdriver

Outdoor Wall Mounted Drinking Fountain

5''

127mm

7 1/2''

10 1/4''

260mm

7''

174mm

3''

70mm

191mm

ORIFICE

6 1/4''

158mm8''

HEIGHT

7''

177mm

10 1/2''

274mm

Instruction Manual

• See Page 11 for Draining and Winterization

• Actual product configuration may vary based on model ordered.

8 1/2''

217mm

1-1/2 ''

1/2''

12mm HOLES (4)

WASTE

4''

200mm

100mm

A

12''

300mm

Rough-In Guide

LEGEND:

A = 3/8” O.D. UNPLATED COPPER TUBE CONNECT - SHUT-OFF VALVE BY OTHERS

4