Global Industrial 761222GN, 761222BK, 761222BL, 761222 User Manual

globalindustrial.ca

Instruction Manual Manual de Instrucciones Manuel d'instruction

Distribucion Industrial Globales S DE RL DE CF

Customer Service

US: 1-800-645-2986

Servicio de atención al Cliente

México: 01.800.681.6940

Service à la clientèle

Canada: 888-645-2986

Outdoor Pedestal Bottle Filling Station

WARNING

• All installation work must be performed by authorized
service personnel.

• Two or more people are recommended to lift and
install the unit.

• To avoid the risk of property damage and/or personal
injury, ensure the mounting surface is adequate to
support 400 lbs.

• Check local codes for plumbing requirements prior
to installation.

• Refer to Rough-In Guide (page 4) prior to installation.

• Thoroughly flush all water supply lines of all foreign
matter before connecting to the fixture.

• Check for any leaks before use.

• DO NOT attempt to repair or replace any part of this
bottle filler unless it is specifically recommended in this
manual. All other services should be referred to a
qualified technician.

• For use with clean, clear potable drinking water only.

• Shut-off water supply during installation to reduce the
risk of water damage.

• Freezing Caution: Before freezing temperatures occur,
refer to the Draining and Winterization section of this
manual (page 10) for proper preparation.

• Installation of a trap on the water drain line may be
necessary; remove trap before winterization draining.

Models 761222, 761222BK,

761222BL & 761222GN

• Failure to follow safety warnings and/or
installation instructions will void warranty.

Note: This unit is designed to be installed on the surface of an existing or new concrete slab.

Included are the necessary vandal-resistant stainless steel bolts and washers needed

to anchor this unit. Installer must provide a 1-1/2” PVC drain line (if applicable) and water supply

line. All connections are made inside the item through the access doors, as shown in the drawings.

It is recommended to install a shut-off valve (not included) on the water supply.

1

Outdoor Pedestal Bottle Filling Station

Instruction Manual

BOTTLE FILLER

SPOUT

DRAIN

DRAIN PAN

PEDESTAL

PUSH BUTTON

BASE

COLOR OPTIONS:

SS316
SS316 GREEN
SS316 BLACK
SS316 BLUE

WWW.GLOBALI NDUSTRIAL.CO M

Package Contents:

- Bottle Filler Pedestal

- Hardware Bag

2

SPECIFICATIONS

Features :

316 Stainless , Lam inar Flow, Heavy Duty, Vandal Resis tant

Finis h: SS Finish, Black(BK), Blue(BL), Green(GN)

Power: No Electrical Required

Bubbler Vandal Resis tant

Activation Type: Push Button

Mounting Type: Floor Mount/Free Standing

Product Dimensions:

14"L x 14"W x 60-1/4"H

Weight: 86 lbs.

Installation Location: Outdoor

No. of Stations: 1

PART BREAKDOWN

Outdoor Pedestal Bottle Filling Station

Instruction Manual

Ref. Qty. Descrip�on

H1 1

H2 1

H3 4

REQUIRED TOOLS

Safety Gloves

Torx Key Wrench

Torx Drill Bit

Anchor Kit

Adjustable Wrench

15-17mm
Wrench

Hammer

Safety Glasses

Small Flathead

Screwdriver

3

Phillips-Head

Screwdriver