Global Industrial 761211, 761210 User Manual
USER MANUAL
MODEL# 761210：Retrofit Toilet/Urinal Flush Sensor Kit for Royal
and Regal Sloan
MODEL# 761211：Retrofit Toilet/Urinal Flush Sensor Kit for Zurn
PRODUCT STRUCTURE
Chrome-Plated M eta l Casting Cover
Operates on 4 AA Alkaline
Batteries
Latching Solenoid Operator
Manual Mechanical Override
Button：
allows user to flush the
valve during a power outage
Operating Pressure：
15 to 100 PSI
Infrared Sensor：
Accurate,stable perf ormanc e,
even in the sunlight or any light.
Adjustable sensor range：
15~32 inch.
Adjustable Flush Volume
Closet：1.28/1.6/2.4 GPF
Urinal：0.25/0.5/1.0/1.5 GPF
Interchangeable from Closet
to Urinal Valve
Dual Flush
Light Flush (1.1 GPF)：
if user is in detection zone for 60
seconds or less
Standard Flush (1.6 GPF)：
if user is in detection zone for more
than 60 seconds
Easy Installation and
maintenance
Retrofits for Royal,
Regal (Sloan) and Z6000
Manual Flush Valve (Zurn)
Diaphragm Type:
self-cleaning mechan ism, preven ts clogging,
reduces maintenance and ensures stable flow
1
SPECIFICATION
Standard Flush
1.6 GPF
Product Retrofit Kit for Water Closet Flush Valve
Casing Material Chrome Plated
Power Supply 4 AA Alkaline Batteries
Power Consumption 3W
Battery Life 3 Years (Based on 3,000 cycles per month)
Sensing Distance
Adjustable 1-9/16"～3-5/32" (40 - 80cm)
Minimum Detection Time 5 Seconds
Flush Delay Time 3 Seconds
Operating Pressure 15 ~ 100 PSI
Flush Volume Adjustable 1.28 / 1.6 / 2.4 GPF
Sanitary Flush Flushes after every 24 hours of non-use
Light Flush ：1.1 GPF
Dual Flush
Standard Flush ：1.6 GPF
Product Retrofit Kit for Urinal Flush Valve
Casing Material Chrome Plated
Power Supply 4 AA Alkaline Batteries
Power Consumption 3W
Battery Life 3 Years (Based on 3,000 cycles per month)
Sensing Distance
Adjustable 1-9/16"～3-5/32" (40 - 80cm)
Minimum Detection Time 5 Seconds
Flush Delay Time 1 Second
Operating Pressure 15 ~ 100 PSI
Flush Volume Adjustable 0.25 / 0.5 / 1.0 / 1.5 GPF
Sanitary Flush Flushes after every 24 hours of non-use
2
HOW TO USE
2. When user leaves the sensing area, the unit automaticly flushes the
inal
A. Closet Flush Valve
1. A continuous invisible light beam is emitted from the sensor. As the user
enters the beam's effective range (1-9/16"～3-5/32" ) more than 5 seconds,
the output circuit continues in a "hold" mode for as long as the user remains
within the effective range of the sensor.
2. When the user steps away from the Valve, the circuit initiates a flushing
cycle to flush the fixture. The circuit then automatically resets and is ready the
next user.
B. Urinal Flush Valve
1. A continuous invisible light beam is emitted from the sensor. As the user
enters the beam's effective range (1-9/16"～3-5/32" ) more than 5 seconds,
the output circuit continues in a "hold" mode for as long as the user remains
within the effective range of the sensor.
3
ur
.
Loading...