Global Industrial 641287 User Manual

UPRIGHT VACUUM

globalindustrial.ca

D

istribucion Industrial Globales S DE RL DE CF

Assembly Instructions Instrucciones de Ensamblaje Directives d’assemblage

g

glo

Assembly Instructions

Customer Service

US: 1-800-645-2986

globalindustrial.ca

Assembly Instructions Instrucciones de Ensamblaje

Customer Service

US: 1-800-645-2986

Servicio de atención al Cliente

México: 01.800.681.6940

globalindustrial.ca

Instrucciones de Ensamblaje

Servicio de atención al Cliente

México: 01.800.681.6940

D

istribucion Industrial Globales S DE RL

Instrucciones de Ensamblaje

Servicio de atención al Cliente

ectives d’assemblageDir

Service à la clientèle

Canada: 888-645-2986

DE CFDistribucion Industrial Globales S DE RL

ectives d’assemblage

Service à la clientèle

Canada: 888-645-2986

US: 1-800-645-2986US: 1-800-645-2986

México: 01.800.681.6940

México: 01.800.681.6940 Canada: 888-645-2986Canada: 888-645-2986

12-INCH CLEANING PATH

Call 1-800-645-2986

Model 641287Global Equipment Company

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed,
including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

Do not use outdoors or on wet surfaces.

Do not use with damaged cord or plug. If vacuum cleaner is not working
as it should, has been dropped, damaged, left outdoors or dropped into
water, return it to a service center before using.

Close supervision is necessary when any appliance is used by or near
children. Do not allow vacuum cleaner to be used as a toy or to run
unattended at any time.

Keep hair, loose clothing, fingers, feet and all parts of body away from
openings, rotating agitator and other moving parts.

Do not operate cleaner in bare feet or when wearing open toe shoes or
sandals.

Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.

Avoid picking up hard, sharp objects with the cleaner. They may damage
the cleaner and the bag.

Do not use without dust bag or dirt cup in place. Shake bag and empty
dirt cup frequently when picking up very fine materials such as powder.

Use extra care when cleaning on stairs.

Do not put any objects into openings. Do not use with an opening blocked.
Keep free of dust, lint, hair or anything that may reduce air flow.

Do not pull or carry by cord, use cord as a handle, close door on cord or
pull cord around sharp edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.

Always disconnect cord from electrical outlet before servicing the cleaner.

Unplug cleaner when not in use. Turn off all controls before unplugging.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Never handle plug or appliance with wet hands.

SAVE THESE INSTRUCTIONS

1

HOW TO ASSEMBLE THE GLOBAL INDUSTRIAL VACUUM

upper handle

A Unpack The Enclosed Packet

Enclosed in a packet are two nut and bolts
for the handle and one upper (larger) and
lower (smaller) plastic cord hooks. An extra
drive belt is included.

B Assemble Handle

Place lower handle into the handle
socket. Take upper handle and slide
on top of lower handle. Make sure
holes align for nut and bolts. Make
sure upper handle curves towards
back of vacuum cleaner. Insert nut
and bolts and tighten.

B

upper clip

C

A

D

cloth bag

lower clip

lower handle

C Upper Cord Hook And Lower Cord Hook Assembly

Take lower cord hook with vacuum facing frontwards and snap into slot on
lower handle with hook facing down. Make sure cord is in cord slot before
clip is snapped in. Take upper cord hook and place cord with spring retainer
into slot and snap in. Wrap cord around cord clips.

spring

1. Place Inner tab
into slot

2. Press hook
around handle

3. SNAP opposite inner
tab into place

BAG
SUPPORT
HOOK

2