Global Industrial 293047 User Manual

Blower HeElectric

Models: 653561 653560 6535

653558 653562 246067

g

globalindustrial.ca

Assembly Instructions Instrucciones de Ensambla

Customer Service

US: 1-800-645-2986

Servicio de atención al Clien

México: 01.800.681.6940

DE CFDistribucion Industrial Globales S DE RL

ectives d’assemblageDir

Service à la clientèle

Canada: 888-645-2986

THESE

050117

1

READ & SAVE

INSTRUCTIO

Wall Mount Models: 653566 653567 653568

653569 246068

Industrial DC Ceiling Fan

READ & SAVE THESE

INSTRUCTIONS

Models:293047 293048 293049

Industrial DC Ceiling Fan

User’s Manual

2

GENERAL SAFETY INSTRUCTIONS

Read instructions carefully before assembling or installing your
fan. It is important that you observe all safety information to
help prevent personal injury and/or property damage.

TO REDUCE THE RISK OF SHOCK, THIS FAN

MUST BE INSTALLED WITH A GENERAL USE

ISOLATING WALL CONTROL/SWITCH.

1.Installation work and electrical wiring should be done by
qualified person only in accordance with all applicable codes and
standards.

2.All wiring and installation procedures must satisfy National
Electrical Codes (ANSI/ NFPA 70) and Local Codes.

3.Disconnect the fan from the power supply before any servicing.

4.Use this fan only in the manner intended by the manufacturer.
This fan is intended for permanent installation and to be used for
circulation only.

5.The secondary support cable included with the fan must be
properly connected.

6.To reduce the risk of personal injury, do not bend the blade mount
when installing the mount onto the motor, installing the blades
onto the mount, or cleaning the fan.

7.Before servicing or cleaning unit, switch power off at service panel
and lock service panel disconnecting means to prevent power
from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
warning device, such as a tag, to the service panel.

8.Be careful of the fan and blades when cleaning, painting, or
working near the fan. Always turn off the power to the ceiling fan
before servicing.

9.Do not insert foreign objects in between rotating fan blades.

10.Ceiling fans without guards are to be installed at least 10 feet
above the floor with adequate clearance between blades and
adjacent walls, furnishings, etc.

11.When mounted in cathedral ceiling, blade tips should be at least
1 foot from the angled roof line or air turbulence may cause the
fan to sway.

12.The supporting beam must be capable of holding at least 90
pounds (or the weight of the fan plus any accessories that might
be added).

Chemical Burn Hazard. Keep batteries away from
children.
This product contains a lithium button/coin cell
battery. If a new or used lithium button/coin cell
battery is swallowed or enters the body, it can cause
severe internal burns and can lead to death in as
little as 2 hours. Always completely secure the
battery compartment. If the battery compartment
does not close securely, stop using the product,
remove the batteries, and keep it away from children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.

-The cells shall be disposed of properly, including
keeping them away from children.

-Even used cells may cause injury.

To reduce the risk of personal injury, do not bend

the blade bracket (flange or blade holder) when

installing the brackets, balancing the blades, or

cleaning the fan. Do Not Insert Foreign Objects In

Between Rotating Fan Blades.

13.For supply connections, if the conductor of a fan is identified
as a grounded conductor, then it should be connected to a
grounded conductor power supply. If the conductor of a fan is
identified as an ungrounded conductor, then it should be
connected to an ungrounded conductor power supply. If the
conductor of a fan is identified for equipment grounding, then
it should be connected to an equipment grounding conductor.

14.To reduce the risk of fire or electric shock, do not use this fan
with other types of solid-state speed control devices.

SPECIFICATION

Model 293047 293048 293049

Size(inch) 72 96 108

Voltage(V) 120 120 120

Frequency(Hz) 60 60 60

Wattage(W) 47.5 47.5 48

AMPS(A) 0.68 0.68 0.7

RPM 145 92 81

Airflow(CFM) 11,290 17,018 19,448

Downrod Dimensions 26mmx6” 26mmx6” 26mmx6”

Blade Pitch 4° 4° 4°

Speeds 6 6 6

Net Weight(lbs) 21.6 24.7 25.6

Certification UL,cUL UL,cUL UL,cUL

User’s Manual

3

REF QTY DESCRIPTION

1 1 Mounting Bracket

2 2 Downrod/Ball Joint Assembly

3 2 Canopy

4 1 Canopy Cover

5 1 Downrod Cover

6 1 Motor Assembly

7 1 Fan Blade Holder

8 6 Fan Blade

9 6 Fan Blade Cap

10 6 Fan Blade Screw Cover

11 1 Bottom Cover

1 2

3

4

65

8

7

11

9

10

PARTS OF THE FAN

Industrial DC Ceiling Fan

User’s Manual

4

H1

H2

H3

H4

H5 H6

H8

H9

H14

H7

REF QTY DESCRIPTION

H1 2 10#-32x3/4 Screw

H2 3 Wire Caps

H3 1

3/16x2” Wood Screw

+Ф5.5xФ25xT1.5 Lock Washer(For cUL Only)

H4 1 Mounting Pin

H5 28 M5x10mm Long Screw

H6 1 Cotter Pin

H7 7 1/4-20x3/8” Long Screw

H8 7 Ф6 Lock Washer

H9 10 M4x6mm Long Screw

H10 10 Ф4 Plain Washer

H11 38 Ф5 Lock Washer

H12 10 M5x8mm Long Screw

H13 1 Remote and Remote Bracket

H14 1 Battery

PARTS OF THE FAN

H12

H11

H10

H13

Industrial DC Ceiling Fan

Model D H

293047 72 425mm

293048 96 425mm

293049 108 425mm

Dimensions(inch)

0

56

34

12