Global Industrial 293033, 293032, 293031, 293030 User Manual
Blower HeElectric
Models: 653561 653560 6535
653558 653562 246067
g
globalindustrial.ca
Assembly Instructions Instrucciones de Ensambla
Customer Service
US: 1-800-645-2986
Servicio de atención al Clien
México: 01.800.681.6940
DE CFDistribucion Industrial Globales S DE RL
ectives d’assemblageDir
Service à la clientèle
Canada: 888-645-2986
THESE
050117
1
READ & SAVE
INSTRUCTIO
Wall Mount Models: 653566 653567 653568
653569 246068
Outdoor Rated Mobile Tilt Drum
Blower Fan
Models: 293030 293031 293032 293033
READ & SAVE THESE
INSTRUCTIONS
Outdoor Rated Mobile Tilt Drum Blower Fan
User’s Manual
2
GENERAL SAFETY INSTRUCTIONS
Read instructions carefully before assembling or installing
your fan. It is important that you observe all safety information
to help prevent personal injury and/or property damage.
Use of a three-prong to two-prong adapter is
not recommended. Improper connection may
create the risk of electrocution. Use of such
adapters is prohibited in Canada.
1. Ensure that the power source conforms to the electrical
requirements of the air circulator.
2. Where a two-prong wall receptacle is encountered, it must be
replaced with a properly grounded three-prong receptacle
installed in accordance with the United States National
Electrical Code (NEC) and all applicable local codes and
ordinances. This work must be done by a qualified electrician,
using copper wire only.
6. Air circulator is intended for general air circulation ONLY. It must
NOT be used in potentially dangerous locations such as
flammable, explosive, chemical-laden atmospheres. Do not
attach ductwork to the air circulator.
7. Air circulator motor is equipped with an automatic resetting
thermal protector that will disconnect power if the motor
overheats. Always unplug air circulator before removing guard or
otherwise accessing the motor, as it may restart unexpectedly.
8. Do not operate any fan with a damaged cord or plug. Discard fan
or return to an authorized service facility for examination and/or
repair.
9. Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
10.This air circulator is suitable for wet location. This air circulator
has Ground-Fault Circuit-Interrupters (GFCI) plug for protection
against electrical shock, please press the TEST button (then
RESET button) every month to assure proper operation.
To reduce risk of fire or electric shock,
do not use this fan with any
Solid State Control devices.
Do not touch motor.
May be hot enough to cause injury.
Prior to cleaning,unplugged and
disconnected from power source.
3. Where possible, avoid the use of extension cords. If they must
be used, minimize the risk of overheating by ensuring that they
are UL Listed and of the proper gauge and length. Never use a
single extension cord to operate more than one air circulator.
4. Do not kink the cord or allow it to contact oil, grease, chemicals,
hot surfaces, or sharp or abrasive objects.
5. This air circulator is to be operated ONLY with its OSHA
complying guard in place to prevent persons and objects from
contacting the revolving propeller. Any other use voids warranty
and may create unsafe conditions.
Do not insert fingers or foreign objects into
the air circulator. Do not block or tamper with
the air circulator in any manner while it is in
operation.
Product Specifications
Model 293030 293031 293032 293033
Manufacturer Model
HVD-24MA HVD-30M HVD-36M HVD-42M
Size(inch) 24 30 36 42
Voltage(V) 115 115 115 115
Frequency(Hz) 60 60 60 60
Wattage(W) 345 425 550 600
AMPS(A) 3.21 3.83 5.5 5.5
RPM 825 815 810 850
Airflow(CFM) 5,800 6,900 12,250 15,000
Speeds 2 2 2 2
Net Weight(KG) 27.9 33.5 45.5 50.8
Certification UL,cUL UL,cUL UL,cUL UL,cUL
User’s Manual
3
Wheel and Front Leg Assembly Instructions
PARTS OF THE FAN
1. Unpack the mobile unit, wheels, and front legs from their
respective cartons.
2. Place the unit on a flat, level surface and carefully tilt unit
toward one end so that the round frame tube for the wheel
assemblies is accessible.
3. Remove the screws from the wheel assemblies.
Contains
REF QTY DESCRIPTION
1 1 Drum Fan
2 2 Wheel
3 2 Front Leg
1
2
3
IMPORTANT: Do not cross thread.
6. Ensure wheels turn freely.
7. Tilt unit toward opposite end.
8. Remove the screws from the front legs.
4. Insert the wheel assemblies into the base of the frame
tubing, aligning the holes of the wheel assemblies with the
holes on the frame tubing.
5. Reinsert the screws from step #3.
9. Insert the front legs into the sockets on the base, aligning the
holes of the front legs with the holes on the frame tubing.
10.Reinsert the screws from step #8.
OPERATION INSTRUCTION
1. Plug the power supply cord into a grounded wall outlet.
(115VAC, 60Hz)
Important: This air circulator comes with a grounded (threeprong) plug. The grounded plug must be used with a grounded
outlet.
2. Turn the control knob to LOW or HIGH to set to the desired
speed.
Control Box
Outdoor Rated Mobile Tilt Drum Blower Fan
MAINTAINANCE
CLEANING
The propeller, guard, and motor should be cleaned periodically
to prevent overheating, and/or operating in an imbalanced
condition.
If cleaning is required remove guard and reinstall when finished
in its originally installed position. Do not repair propeller if it
becomes damaged. The propeller is accurately balanced at the
factory and should be replaced if damaged.
Motor is permanently lubricated.
IMPORTANT: Ensure that propeller is replaced in correct
direction as factory installed.
Parts replacement and troubleshooting
to be performed only by qualified personnel.
Prior to cleaning, unplugged and
disconnectedfrom power source.
TROUBLESHOOTING
Symptom Possible Cause(s) Corrective Action
Unit fails to operate 1. Power cord not plugged in
2. Blown fuse or open circuit breaker
3. No power
4. Defective motor
1. Plug into outlet
2. Replace fuse or reset circuit breaker
3. Contact power company
4. Replace motor
Excessive vibration 1. Mounting guard screws are torqued insufficiently
2. Propeller imbalance due to accumulation
of dirt, etc.
1. Torque the nuts to 15-20 in. lbs.
2. Clean propeller
User’s Manual
4
TO ADJUST AIRFLOW UPWARD OR DOWNWARD:
1. Loosen the position knob.
2. Tilt the air circulator to the desired angle and then firmly tighten
the the position knob.
Outdoor Rated Mobile Tilt Drum Blower Fan
②
①
Loading...