Globalegrow E Commerce B1 User Manual

User Manual

Model:B1, B2

Shenzhen Globalegrow E-Commerce Co., Limited

Overview

Quick Start Guide

1. Power off the light before screwing the LED light bulb into the desired light

socket.

2. Make sure your iPhone or iPad (iOS 10.0 or later) is connected to a 2.4GHz

Wi-Fi network. (This product does not support 5GHz Wi-Fi Networks.)

3. Make sure you have at least 2 bars of Wi-Fi signal there.

4. Download the free iHaper app from the App store and log in.

5. Tap “+” and scan the QR code. Then follow the steps to add the device to

the Home and Room. Please keep the QR code for future use.

6. Name this product to help you identify it in the Home app and to control it

with Siri. For example, you can name the product “Room Light”, then launch

Siri and speak “Turn on the Room Light”.

7. Change the color and adjust the brightness by tapping and holding the bulb

icon in the app for 2 seconds or just asking Siri, e.g., “Set room light to

Green” or “Set room light to 50%”.

8. Create a scene which controls multiple accessories at the same time. Tap

the scene to turn it on or off, or just ask Siri. For example, if you assign the

“Good Night” command to the scene of turning off room light and turning on

the living room light, when you speak “Good night” to Siri, everything is

done.

For Android device :

Please download and open free iHaper app from Google play. Then tap “ + ”

icon and follow the on-screen directions to complete network setup.

Enabling Alexa

1. Create an account in iHaper App ( username and passward are case

sensitive) and login to your account.

2. Go to iHaper App > long press device icon to enter the detail.

3. Enable Cloud registration.

4. Open Alexa App and enable iHaper Alexa skills using the same account

info.