Global Display Solutions Spa CC15250TBX Users Manual

CC15250TBX/R1

G1500072 (Full Feature module)

G1500127 (Limited Feature module)

15” Std Brightness LCD monitor

INSTALLATION / USER MANUAL

This technical literature is subject to change.

Please contact NCR Display Engineering / GDS before designing product based on this

information.

This manual should be read in conjunction with Technical Specification SPE?????.

This document and information herein is the property of Glo bal Dis play Sol utions Ltd. and al l
unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display
Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublishe d Property of GDS
(UK).

MAN10158_0A 1 of 16

FCC Notice (U.S. Only) .................................................................................................................. 3

Safety Instructions ........................................................................................................................... 4

Cleaning the LCD Colour Monitor.................................................................................................. 5

Controls ........................................................................................................................................... 5

On-Screen Display Menu ................................................................................................................ 6

Specifications ................................................................................................................................ 10

Display Modes............................................................................................................................... 10

Pin Assignments – Limited Feature Module ................................................................................. 11

Signal - Analogue: 15 way HD VGA connector ....................................................................... 11

USB Mini B connector .............................................................................................................. 11

USB Standard connector ........................................................................................................... 11

Power connector: ....................................................................................................................... 11

Pin Assignments – Full Feature Module ....................................................................................... 12

Signal – Digital: 24 way DVI Female connector (If fitted):...................................................... 12

Power / USB: Plus Power USB connector (If fitted)................................................................. 12

Mechanical Drawings (G1500072) ............................................................................................... 13

Mechanical Drawings cont:........................................................................................................... 14

Mechanical Drawings (G1500127) ............................................................................................... 15

Mechanical Drawings Cont ........................................................................................................... 16

Contents

This document and information herein is the property of Glo bal Dis play Sol utions Ltd. and al l
unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display
Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublishe d Property of GDS
(UK).

MAN10158_0A 2 of 16

FCC Notice (U.S. Only)

FCC Class B – Applicable only to Limited Feature connections

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instruction manual, may cause interference with radio
and television reception. This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1 This device may not cause harmful interference.

2 This device must accept any interference received, including interference that may cause
undesired operation.

NOTICE: The FCC regulations provide that changes or modifications not expressly approved by

Global Display Solutions SpA. could void your authority to operate this equipment.

These limits are designed to provide reasonable protection against harmful interference in a
residential installation. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference with radio or television
reception, which can be determined by turning the equipment off and on, you are encouraged to try
to correct the interference by one or more of the following measures:

• Reorient the receiving antenna.

• Relocate the system with respect to the receiver.

• Move the system away from the receiver.

• Plug the system into a different outlet so that the system and the receiver are on different

branch circuits.

If necessary, consult a representative of NCR Corporation or an experienced radio/television
technician for additional suggestions.

The following information is provided on the device or devices covered in this document in
compliance with the FCC regulations:

• Product name: 15” Std Bright LCD Monitor

• Model number: G1500072 (Full Feature Module; All connectors present)

• Model number: G1500127 (Limited Feature Module; DVI Video / USB Plus Power

connectors removed)

• Company name: Global Display Solutions SpA

This document and information herein is the property of Glo bal Dis play Sol utions Ltd. and al l
unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display
Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublishe d Property of GDS
(UK).

MAN10158_0A 3 of 16

Safety Instructions

This model is a LCD display module for building into other equipment. It must be used for no
other purpose.

Read the Safety Instruction carefully and keep it for use later.

Beware of all warning and instruction signs marked on the monitor.

The monitor is designed as a display component for building into other equipment. It must be used
for no other purpose.

The chassis metalwork of the module must be properly bonded to the main earthing termination in
Class I equipment.

Care must be exercised in the application of this monitor to prevent overheating. Ensure that the
ambient temperature around the module does not exceed 50oC and provide adequate means of
ventilation to achieve this.

When cleaning, cut off the electrical supply at all times. Never use liquid or aerosol detergent, use a
soft damp cloth instead.

Never insert anything metallic into the monitor openings. This may create an electric shock hazard.

To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should
open the monitor’s case.

Openings in the monitor cabinet are to allow for ventilation. To prevent overheating, these
openings should not be blocked or covered.

Do not expose the LCD to rain or use it near water. If the LCD accidentally gets wet, disconnect it
from electrical supplies immediately.

If the LCD does not operate normally - in particular, if there are any unusual sounds or smells
coming from it - disconnect it immediately.

Do not put pressure on the LCD panel screen because it is very fragile.

Do not touch the LCD panel with bare hands, the grease from skin is difficult to remove and may
damage the screen.

Always handle the LCD monitor with care when moving it.

Take care that the monitor is disposed of correctly at the end of its life. The CCFL lamps used in the
monitor contain mercury. If in doubt refer to local ordinances or regulations for proper disposal.

This document and information herein is the property of Glo bal Dis play Sol utions Ltd. and al l
unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display
Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublishe d Property of GDS
(UK).

MAN10158_0A 4 of 16

Cleaning the LCD Colour Monitor

1. To clean the LCD panel:

- Wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean,

lint free cloth. This is to remove dust and other particles without scratching the LCD
panel.

- If it is still not clean, then wipe with a damp lint free cloth and blow on it to dry.

2. Do not clean the panel with keton-type material (e.g. acetone), ethyl, toluene, ethyl acid,

methyl, or chloride. These may damage the panel.

3. Do not apply pressure to the panel.

Controls

The controls are three buttons found on the rear of the unit.

Button 1 (Menu) Displays the main menu and the other sub-menus.

Button 2 (-) Scrolls down the menu and adjusts the level of the control.
Button 3 (+) Scrolls up the menu and adjusts the level of the control.

To make picture adjustments, initially pressing the “Menu” button to bring up the OSD Main Menu.
Then, pressing the “-” or “+” button scroll through the Main Menu to highlight the various
functions. Pressing ”Menu” again selects the required command/sub menu.

If an adjustment has been made, there is no need to use a store command for this new setting as this
will occur automatically.

To exit the menu, select EXIT within the menu structure. If no buttons have been pressed for a short
period of time, the menu will automatically disappear from the screen.

1

Selects the chosen setting or function, and afterwards saves it.

3

2

This document and information herein is the property of Glo bal Dis play Sol utions Ltd. and al l
unauthorised use and reproduction is prohibited. Copyright © 2009 by Global Display
Solutions Ltd, Yorkshire, UK. All rights reserved. Confidential, Unpublishe d Property of GDS
(UK).

MAN10158_0A 5 of 16