Global Display Solutions Spa BRD01793 User Manual
MAN10454 Rev.00
Description
User Manual - NFC 12V board
GDS Part No.
BRD01793 - 0WQ00484AC
Issue Date
19.07.2013
Issue Level
00
Pages
7
Author(s):
Signature:
Date:
F.Ceccato
F.Ceccato
19/07/2013
Approved:
P. Giardini
P.Giardini
19/07/2013
Final Release
This technical literature is subject to change without notice.
Please contact GDS or its representative before designing your product based on this specification
This document and information herein is the property of Global Display Solutions and all unauthorised use and
reproduction is prohibited. Copyright © 2012 by Global Display Solutions, Italy. All rights reserved. Confidential,
MAN10408_00 1 of 8
Unpublished Property of GDS.
TABLE OF CONTENTS
1. FCC Notice (U.S. Only) ............................................................................................. 3
2. Safety Instructions ..................................................................................................... 4
3. NFC compatibility ...................................................................................................... 4
4. Mechanical dimensions ............................................................................................. 5
5. Connections................................ ................................................................ .............. 6
6. Operating mode ........................................................................................................ 6
7. Labelling ................................................................................................................... 8
This document and information herein is the property of Global Display Solutions and all unauthorised use and
reproduction is prohibited. Copyright © 2012 by Global Display Solutions, Italy. All rights reserved. Confidential,
Unpublished Property of GDS.
MAN10408_00 2 of 8
1. FCC Notice (U.S. Only)
FCC Class B
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause interference with radio and television
reception. This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Global Display
Solutions SpA could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference with radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the
following measures:
Reorient the receiving antenna.
Relocate the system with respect to the receiver.
Move the system away from the receiver.
Plug the system into a different outlet so that the system and the receiver are on different branch
circuits.
If necessary, consult a representative of Technogym SpA or an experienced radio/television technician for
additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with the
FCC regulations:
Product name: NFC 12V board
Model number: BRD01793 - 0WQ00484AC
Company name: Global Display Solutions SpA
This document and information herein is the property of Global Display Solutions and all unauthorised use and
reproduction is prohibited. Copyright © 2012 by Global Display Solutions, Italy. All rights reserved. Confidential,
Unpublished Property of GDS.
MAN10408_00 3 of 8
Loading...