This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause interference with radio and television
reception. This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Global Display
Solutions SpA could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference with radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the
following measures:
Reorient the receiving antenna.
Relocate the system with respect to the receiver.
Move the system away from the receiver.
Plug the system into a different outlet so that the system and the receiver are on different branch
circuits.
If necessary, consult a representative of Technogym SpA or an experienced radio/television technician for
additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with the
FCC regulations:
Product name: NFC 5V RS232
Model number: BRD02822 - 0WR01147AA
Company name: Global Display Solutions SpA
End product labelling:
Using a permanently affixed label, the modular transmitter is labelled with its own FCC identification number,
and,
if the FCC identification number is not visible when the module is installed inside another device, then the
outside of the device into which the module is installed must also display a label referring to the enclosed
module.
The final end product must be labelled in a visible area with the following:
The NFC 5V RS232 board is a Mifare/NFC reader module of the Technogym Devices (Equipment Cardio,
Trainer point or Class Reader).
Read the Safety Instruction carefully and keep it for use later.
Beware of all warning and instruction signs marked on the NFC 5V RS232 board.
Ensure that the ambient temperature around the module is between +5°C and +50 °C (with relative humidity
between 5% and 85%).
3. NFC compatibility
The NFC module will be compatible with the following handsets with respect to the development phases:
Google NEXUS S
Blackberry CURVE 9360
Blackberry BOLD 9900
Samsung GALAXY SII I9100 NFC
Nokia 700
This list may be subject to future changes according to new devices released on the market in the coming
months. For a complete list of devices which integrate NFC please refer to:
The NFC 5V RS232 board has the main connector (Picoblade Molex SMT - 53398-087) with reference J1.
Figure 2 J1 connector details
6. Operating mode
The NFC 5V RS232 board operate with both user keys based on Mifare protocol (TGS Mifare and MyWellness
key) and NFC smartphones. The minimum reading distance with NFC devices must be at least 15 mm.
In the case of interaction with user key based on Mifare protocol, the board traces its operating states, based on
the use of fitness equipment by the athlete (eg, running a year) and through some parameters collected from
the user keys.
When the board reads a smartphone NFC, the data exchange between them is minimized, thanks to a NFC
application, installed in the smartphone (installed as prerequisite), which supports most of the data
management.
The NFC 5V RS232 board operates with the following transmitter specifications:
Work Frequency : 13,56 MHz
Frequency Range: 13.553-13.567MHz
Electric Field @ 30m: < 0.5 mV/m
This document and information herein is the property of Global Display Solutions and all unauthorised use and