Global Contract Free Fit Flow Ease Handset User Manual

Free Fit
Flow Visual
Handset
User manual

2019

ISO 9001:2008OHSAS 18001:2007 ISO 14001:2004

Visit us on the Internet at globalcontract.com • [phone]

Global Contract Inc. 565 Petrolia Road
North York, Ontario, M3J 2X8

GLOBALContract

USER GUIDE

Installation

Attach the handset to the underside of the table top using the two provides screws. If the
worksurface thickness is less than 18mm (3/4”) use shorter screws (not provided).

Connect

Connect the handset cable to one of the columns connetor ports. The second port on the
handset can be used to connect other devices.

Button Guide

Adjust the table upwards.

• March 2019

M

Adjust the table downwards.

- Memory - set or adjust memory

M

position.

Symbol Guide

Explanation of the display.

Explanation of the symbols.

Menu mode

Memory

Error codes

Reset
Homing Mode

15 sec sleep mode
Display backlight will go to sleep mode after 15 seconds of inactivity.

Imperial, Inch

Thermometer

Metric, Centimeter

Height Reading

Start Up

Once connected, a height read-out should appear on the display.

Start-Up Indicatons

1

73.8

Page • globalcontract.com2

Three dashes.

Or with a slave number such as.

Height reading.

GLOBALContract

• March 2019

USER GUIDE

Preform Reset / Homing

Critical Step. At installation or if a critical component such as a column or mo­tor is changed or disconnected, a Reset must be performed.

Note: Ensure that the area around and under the table are clear.

Press and hold the Up and Down buttons

and

8 seconds

Release

Release

Height
Adjustment

Complete

at the same time.

seconds.

Release the Up and Down buttons.

Immediately press and hold the Down
button - the display will indicate reset
mode with three dashes and a house
in the lower left corner - until the desk
reaches its lowest position and stops
moving.

Release the Down button.

The three dashes on the display will be
replaced by a height reading.

The reset process is completed

Memory Position

Set/Adjust a quick memory position. THere is a quick memory position option
to set the Up and Down buttons to move the desk to a predefined height. To set
the predefined height for a button:

Setting memory Position 1-3

Move the table to desired height.

or

Press the M button, for at least 3

M

seconds.

Use the Down button to navigate to SET.Hold the buttons pressed at least 8

Press the M button to select

M

1,2 or 3

M

Accessign memory Positions1-3

Set/Adjust a quick memory position. THere is a quick memory position option
to set the Up and Down buttons to move the desk to a predefined height. To set
the predefined height for a button:

Use the Up or Down button to select
position to store the height to 1, 2 or 3

Press the M button to save current
height.

Hold the M button for at least 3 seconds

M

or

M

or

Use Preset Heights

or

or

Adjust the table to the preferred height to
be stored as a memory position.

Press the M button, and release.

immediately press the Up or Down but­ton to store the current height as a quick
memory position to the selected button.

Press and hold either the Up or Down
button to move the desk to the quick
memory position, the desk will stop at
the preset height. Release the button.

Press and hold the same button as previ­ously to bypass the desks preset height.

1,2 or 3

M

Use the Up or Down button to choose
stored position 1, 2, or 3

Press and hold the M button while the
table moves to the stored memory
position.

•Pageglobalcontract.com 3