GLOBAL AMICI 2807790 User Manual
Mini-ITXMMotherboard22807790
Version 1.0, August
User’s Manual
2007
Copyrights
This manual is copyrighted and all rights are reserved. It does not allow any non authorization in
copied, photocopied, translated or reproduced to any electronic or machine readable form in
whole or in part without prior written consent from the manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental or
consequential damages arising from the use of inability to use the product or documentation, even
if advised of the possibility of such damages. The manufacturer keeps the rights in the subject to
change the contents of this manual without prior notices in order to improve the function design,
performance, quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to update the
information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are mentioned for
identification purposes only, and may be trademarks and/or registered trademarks of their
respective companies or owners.
Safety Instructions
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10.Never pour any liquid into the opening that could damage or cause electrical
shock.
11. If any of the following situations arises, get the equipment checked by service
personnel:
† The power cord or plug is damaged.
† Liquid has penetrated into the equipment.
† The equipment has been exposed to moisture.
† The equipment does not work well or you can not get it work according to
User’s Manual.
† The equipment has dropped and damaged.
† The equipment has obvious sign of breakage.
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAY DAMAGE THE EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
iii
FCC-B Radio Frequency Interference Statement
This equipment has been
tested and found to comply
with the limits for a Class B
digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the measures listed
below.
† Reorient or relocate the receiving antenna.
† Increase the separation between the equipment and receiver.
† Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
† Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’ INSTALLATION AVANT DE RACCORDER AU RESEAU.
2807790
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
iv
CONTENTS
Technical Support.................................................................................................ii
Safety Instructions................................................................................................iii
FCC-B Radio Frequency Interference Statement...................................................iv
WEEE (Waste Electrical and Electronic Equipment) Statement................................v
Chapter 1 Product Overview..........................................................................1-1
Mainboard Specifications.............................................................................1-2
Block Diagram...............................................................................................1-4
Mainboard Layout........................................................................................1-5
Powre Consumption....................................................................................1-6
Safety Compliance & MTBF..........................................................................1-7
Board Dimension..........................................................................................1-8
Back Panel & I/O Shield Drawing..................................................................1-9
Chapter 2 Hardware Setup.............................................................................2-1
Quick Components Guide.............................................................................2-2
Memory.......................................................................................................2-3
CPU (Central Processing Unit)......................................................................2-4
Power Supply..............................................................................................2-7
Back Panel...................................................................................................2-8
Connectors................................................................................................2-10
Jumpers.....................................................................................................2-16
Slots..........................................................................................................2-17
Chapter 3 System Resources.......................................................................3-1
Watch Dog Timer Setting..............................................................................3-2
AMI POST Code...........................................................................................3-3
Resource List..............................................................................................3-6
viii
2807790 Mainboard
Mainboard Specifications
Processor Support
- AMD Sempron ,Athlon 64/64 X2 (Dual Core) processor with AM2
package
- 4-pin CPU fan pinheader with Smart Fan Speed Control
Supported FSB
- Hyper Transport supporting speed up to 1 GHz (2000MT/s)
Chipset
- Northbridge : AMD RS690T
- Southbridge : AMD SB600
Memory Support
- DDR2 400/533/667/800 (4GB Max)
- 2 DDR2 SO-DIMM slots (unbuffered)
LAN
- 2 PCI-E Gb LAN by Marvell 88E8056
Audio
- Realtek ALC888 7.1-channel HDA codec
- 6 watt amplifier
IDE
- 1 40-pin IDE connector
- Supports 2 IDE devices
SATA
- 2 SATA II ports by SB600
- Supports storage and data transfers at up to 300MB/s
Expansion Slots
- 1 PCI slot
- 1 Mini PCI-E socket
1-2
Connectors
Rear I/O
- 1 PS/2 mouse port
- 1 PS/2 keyboard port
- 2 COM ports
- 1 VGA/ HDMI stack connector
- 4 USB ports
- 5 flexible audio jacks
- 1 optical SPDIF-out jack
Onboard Connector
- 2 USB connectors (4 ports)
- 1 parallel port connector (LPT)
- 1 LVDS connector
- 1 TV-Out connector
- 1 amplifier connector
- 1 front panel connector
- 1 SMBUS connector
- 1 CPU fan connector
- 1 system fan connector
- 2 SATA connectors
- 1 Chassis Intrusion connector
Form Factor
- Mini-ITX (17.0cm X17.0cm)
Mounting
- 4 mounting holes
Environmental
Operating Temperature
- Temperature: -10oC ~ 70oC
- Humidity: 0% ~ 85% RH
Storage Temperature
- Temperature: -20oC ~ 80oC
- Humidity: 25% ~ 90% RH
Product Overview
1-3
2807790 Mainboard
Block Diagram
1-4
Mainboard Layout
Backpanel I/O
Product Overview
Top : mouse
Bottom:
keyboard
Top: LAN Jack
Bottom: USB ports
Top: LAN Jack
Bottom: USB ports
T:
M:
B:
T:RS-Out
M:CS
B:SPDIF Out
COM Ports
Top: VGA Port
Bottom: HDMI
Line-In/ SS-Out
Line-Out
Mic
-Out
JAUD1
J2
J1
J3
AMD
RS690T
JLDVS1
ALC888
JTV1
JUSB2
JUSB1
PCI1
(2807790 v1.X) Mini ITX Mainboard
SB600
SATA1
SATA2
JBAT1
JFP1
DIMM2
DIMM1
Winbond
W83627DHG
JCASE1
CPUFAN1
CON1
J4
ATX1
BAT T
+
SYSFAN1
JPW1
IDEB1
JLPT1
1-5
2807790 Mainboard
Power Consumption
Component
CPU AMD Athlon™ 64 x2 Dual Core 2G
DDR2
HDD
ODD NEC DVD-Multi Record ND-4550A
12Vp 12V 5V 3.3V 5VSB -12V W
AMD ThermNow! Utility
Particle Fuly + VCD + Xcopy
3Dmark 2005
Idle
S3
Description
1024MB DDR2 533 *2
Maxtor 80G2807790
4.2 0.81 3.03 1.08 0.032 0.028 79.33
3.07 1.01 4.66 1.07 0.039 0.02 76.226
2.81 0.84 4.27 1.06 0.04 0.042 69.352
0.82 0.81 3.09 1.17 0.024 0.017 39.195
0 0 0 0 0.512 0 2.56
1-6
Product Overview
Safety compliance & MTBF
Safety compliance
Certification Title of standard
RFI
CE
ImmunityEN 55024:1998+A1:2001+A2:2003 Product family standard
CNS 13438 乙類(2006年版)
BSMI
AS/NZS CISPR 22:2004
C-Tick
FCC CFR Title 47 Part 15 Subpart B: 2005 Class B
FCC
CISPR 22: 2005
VCCI V-3:2004, Class B
VCCI
VCCI V-4:2004, Class B
MTBF - Reliability Prediction
Calculation
Model
Telcordia Issue 1 35 GF, GU - Ground
Telcordia Issue 1 55 GF, GU - Ground
Standard number
EN 55022:1998+A1:2000+A2:2003 Class B Product family standard
EN 6100-3-2:2000 Class D
EN 6100-3-3:1995+A1:2001
Operation
temperature(°C)
Operating
Environment
Limits for harmonic current
emission
Limitation of voltage fluctuation
and flicker in low-voltage supply
system
Duty Cycle MTBF(hr.)
100% 93,411
Fixed,
Uncontrolled
100% 52,174
Fixed,
Uncontrolled
1-7
2807790 Mainboard
Board Dimension
1-8
Back Panel & I/O Shield Drawing
Product Overview
1-9
Loading...