Global American 3308540 User Manual

User’s Manual
Single B oard Computer 3308540 Version 1.0 ,
March 2009
Copyrights
This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental or consequential damages arising from the use of inability to use the product or documentation, even if advised of the possibility of such damages. The manufacturer keeps the rights in the subject to change the contents of this manual without prior notices in order to improve the function design, performance, quality and reliability. The author assumes no responsibility for any errors or omissions, which may appear in this manual, nor does it make a commitment to update the information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners.
.
.
Packing List
Please check the package before you starting setup the system
Hardware:
3308540 Miniboard x 1
Cable Kit:
Audio Port Cable x 1
44-pin
44-pin
40-pin
ATA33 IDE Cable x1
SATA Cable x 1
SDTV Cable x 1 (Optional)
YPbPr Cable x 1 (Optional)
DVI module x 1
SATA Power Cable x 1
1 to 3 power output cable
DC Power Cable x 1
PS/2 keyboard & mouse cable x 1
.
Printed Matters:
Driver CD x 1 (Including User’s Manual)
USB Cable x 1
COM Port Cable x 1
.
Chapter 1 <Introduction>
1.1 <Product Overview>
3308540 is a 3.5 inch miniboard, with Intel® Atom N270 processor for 533 MHz front side
bus, Intel® 945GSE and ICH7M chipset, integrated GMA950 graphics, DDR2 SO-DIMM memory, Realtek AC97 Audio, Serial ATA and one Intel® 82574L Gigabit LAN.
Intel Atom Processor
The Intel® Atom N270 single core processor is with 533 MHz front side bus, 512KB L2 cache. It's built on 45nm process technology support Hyper-Threading Technology, Enhanced Intel SpeedStep® Technology reduces average system power consumption.
Mobile Intel® 945GSE chipset
The board integrates Intel® 945GSE and ICH7M chipset. The chipset features power-efficient graphics with an integrated 32-bit 3D graphics engine based on Intel® Graphics Media Accelerator 950 architecture with DVI, LVDS, CRT, and TV-Out display ports.
It provides I/O capabilities and flexibility via high-bandwidth interfaces such as PCI, Serial ATA and Hi-Speed USB 2.0 connectivity. It also includes a single channel for 400/533 MHz DDR2 system memory (SODIMM), AC97 Audio with 5.1 channels surrounding sound.
All in One multimedia solution
Based on Intel 945GSE and ICH7M chipset, the board provides high performance onboard graphics, 18-bit Dual channel LVDS interface, DVI and HDTV and 5.1 channels AC97 Audio, to meet the every requirement of the multimedia application.
Flexible Extension Interface
The board also provides Compact Flash Type II socket and one mini-PCI socket.
.
1.2 <Product Specification>
General Specification
Form Factor 3.5 inch miniboard CPU Intel® Atom N270 processor
Package type: FCBGA8 Front side bus: 533MHz
Memory 1 x 200-pin DDR2 SO-DIMM SDRAM up to 2GB
Unbufferred, none-ECC memory supported only Chipset Intel® 945GSE and ICH7M BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant Watchdog Timer System reset programmable watchdog timer with 1 ~ 255
sec./min. of timeout value Real Time Clock Intel® ICH7M built-in RTC with lithium battery Enhanced IDE UltraDMA33 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
One CompactFlash Type II socket on solder side Serial ATA Intel® ICH7M integrates 2 Serial ATA interfaces
(No RAID Function)
Up to 150MB/s of transfer rate
Multi-I/O Port
Chipset Intel® ICH7M with Winbond® W83627THG controller Serial Port One RS-232/422/485 serial port and one RS-232 USB Port Two external & two internal Hi-Speed USB 2.0 ports with
480Mbps of transfer rate IrDA Port One IrDA compliant Infrared interface supports SIR K/B & Mouse PS/2 keyboard and mouse port GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O
interface
Smart Fan One CPU fan connectors for fan speed controllable
VGA Display Interface
Chipset Intel® 945GSE GMCH (Graphic Memory Controller Hub) Frame Buffer Up to 224MB shared with system memory Display Type CRT, LCD monitor with analog display, DVI, HDTV Connector External DB15 female connector on rear I/O panel
Onboard 40-Pin LVDS connector Onboard 26-Pin DVI connector Onboard 10-Pin TV-out connector
Ethernet Interface
Controller 1 x Intel 82574L Gigabit Ethernet controller
.
Type Triple speed 10/100/1000Base-T
auto-switching Fast Ethernet Full duplex, IEEE802.3U compliant
Connector One External RJ45 connector with LED on rear I/O panel
Audio Interface
Chipset REALTEK ALC655 Interface 5.1 channel surround audio with Line-in, Line-out and MIC-in
Connector Onboard audio connector with pin header
Onboard CD-IN connector
Expansive Interface
Mini PCI 1 x Mini PCI socket
Power and Environment
Power Requirement DC 9~24V input with onboard 4-pin connector Dimension 146.5 (L) x 101(H) mm Temperature Operating within 0 ~ 60
Storage within -20 ~ 85
Ordering Code
3308540 Support Intel Atom N270 processor with onboard VGA, HDTV,
DVI, LVDS, Audio, SATA, Giga LAN, USB2.0, CF, GPIO, Mini PCI, FDD
.
1.3 <Mechanical Drawing>
Unit: inch
.
1.4 <Block Diagram>
Intel Atom N270 Processo
r
Intel GMA950 Graphics
BIOS
AC97 A LC655
HDTVLVDSDVI
W83627THG
2 x SA T
A
CompactFlashIDE
2 x Serial ports
1 x 200-pin DDR2 SO-DIMM SDRAM 533/677MHz
4 x USB2.0 ports
8-bit GPIO
Intel 82574L
1 x GLAN
1 x IrDA
Intel 945 GSE
ICH7M
7307C
DVI
SPI
Mini PCI
.
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
JAT
SYSFAN
CN_IR
IDE
CN_LVDS
MINIPCI
CDIN
CN AUDIO
CN_DIO
SATA1/2
JFRNT CN_INV DC_OUT
CN_HDTV
CN_COM2
CPUFAN
CN_USB
CN_DVI
DC_IN
.
RJ45 PS2 USB CRT COM1
DDRII
CF
.
2.2 <Jumper Reference>
Jumper Function
JRTC CMOS Operating/Clear Setting JVLCD LCD Panel Voltage Setting JAT AT Mode JCSEL1/2 COM2 RS232/422/485 mode setting
JRTC
JCSEL1
JCSEL2
JVLCD
JAT
.
2.3 <Connector Reference>
2.3.1 <Internal Connector>
Connector Function Remark
DDRII 200 -pin DDR2 SO-DIMM SDRAM slot Standard IDE 44-pin primary IDE connector Slim SATA1/2 7-pin Serial ATA connector Standard CN_AUDIO 5 x 2-pin audio connector Slim CDIN 4-pin CD-ROM audio input connector Standard CN_DIO 6 x 2-pin digital I/O connector Standard CN_USB 5 x 2-pin USB connector Standard CPUFAN 4-pin CPU cooler fan connector Standard SYSFAN 3-pin system cooler fan connector Standard CN_COM2 5 x 2-pin com connector Slim CN_IR 5-pin IrDA connector Standard CF Compact Flash Type II socket Standard CN_LVDS 20 x 2-pin LVDS connector Standard CN_INV 5-pin LCD inverter connector Standard DC_OUT 4-pin power output connector Standard DC_IN DC 12V input connector Standard MINIPCI Mini-PCI socket Standard CN_DVI 13 x 2-pin DVI interface Standard CN_HDTV 5 x 2-pin HDTV interface Standard JFRNT 14-pin switch/indicator connector Standard
2.3.2 <External Connector>
Connector Function Remark
CRT DB15 VGA connector Standard USB Dual USB 2.0 connector Standard COM1 DB9 Serial port connector Standard RJ45 One RJ45 LAN connector Standard PS2 PS/2 keyboard and mouse connector Standard
.
2.4 <CPU and Memory Setup>
The board provides one 200-pin DDR2 SO-DIMM to supp ort DDR2 533 memory modules up to 2GB of capacity. Non-ECC, unbuffered memory is supported only.
DDRII
CF
Loading...
+ 32 hidden pages