Global American 3307620 Version 1.0 User Manual
User’s Manua l
Version 1.0
3.5" Embedded Controller 3307620
2
Copyrights
This manual is copyrighted and all rights are reserved. It does not allow any
non authorization in copied, photocopied, translated or reproduced to any
electronic or machine readable form in whole or in part without prior written
consent from the manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use
the product or documentation, even if advised of the possibility of such
damages. The manufacturer keeps the rights in the subject to change the
contents of this manual without prior notices in order to improve the function
design, performance, quality and reliability. The author assumes no
responsibility for any errors or omissions, which may appear in this manual,
nor does it make a commitment to update the information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
3307620 User’s Manual
Packing List
Please check the package before you starting setup the system
Hardware:
3307620 little board x 1
Cable Kit:
44-pin
44-pin
44-pin ATA33 IDE Cable x 1
40-pin
COM port & Printer Port Cable x 1
USB Cable x 1
PS/2 keyboard & mouse cable x 1
Audio Cable x 1 Floppy Cable x 1
1 to 3 power
output cable
Other Accessories:
Divers CD (including User’s Manual) x 1
Printed User’s Manual x 1
3
3307620 User’s Manual
Index
Chapter 1 <Introduction> ..................................................................................... 6
1.1 <Product Overview>................................................................................. 6
1.2 <Product Specification> ........................................................................... 7
1.3 <Mechanical Drawing>............................................................................. 9
1.4 <Block Diagram>.................................................................................... 10
Chapter 2 <Hardware Setup>............................................................................. 11
2.1 <Connector Location> ............................................................................ 11
2.2 <Jumper Location & Reference> ........................................................... 12
2.3 <Connector Reference> ......................................................................... 13
2.3.1 <Internal Connector>.................................................................. 13
2.3.2 <External Connector>................................................................. 13
2.4 <CPU & Memory Setup>........................................................................ 14
2.4.1 <CPU> ........................................................................................ 14
2.4.2 <Memory> .................................................................................. 14
2.5 <CMOS Setup> ...................................................................................... 15
2.6 <Enhanced IDE & CF Interface>............................................................ 16
2.7 <Floppy Port>......................................................................................... 17
2.8 <Ethernet Interface> .............................................................................. 18
2.9 <Onboard Display Interface> ................................................................. 19
2.10 <Onboard Audio Interface>.................................................................. 26
2.11 <Serial Port> ........................................................................................ 27
2.12 <GPIO Interface> ................................................................................. 28
2.13 <Power Supply> ................................................................................... 29
2.13.1 <Power output> ........................................................................ 29
2.13.2 <Power Output> ....................................................................... 29
2.14 <Switch and Indicator>......................................................................... 30
4
3307620 User’s Manual
Appendix A <I/O Pin Assignment> .................................................................... 33
A.1 <IDE Port> ............................................................................................. 33
A.2 <Floppy Port> ........................................................................................ 34
A.3 <IrDA Port> ............................................................................................ 34
A.4 < VGA Port >.......................................................................................... 34
A.5 <Serial Port> .......................................................................................... 35
A.6 <LAN Port> ............................................................................................ 35
A.7 <PS/2 Keyboard & Mouse Port>............................................................ 35
Appendix B <System Resources> .................................................................... 39
B.1 <I/O Port Address Map> ........................................................................ 39
B.2 <Memory Address Map> ....................................................................... 41
B.3 <System IRQ & DMA Resources> ........................................................ 42
B.3.1 <IRQ> ........................................................................................ 42
B.3.2 <DMA> ....................................................................................... 41
Contact Information ............................................................................................ 43
5
3307620 User’s Manual Introduction
Chapter 1 <Introduction>
1.1 <Product Overview>
3307620 is the 3.5 inches embedded motherboard with AMD Geode GX533 platform, with
onboard VGA, AC97 audio, dual LAN and DC 12V input interface. Based on the AMD
Geode GX533 processor, the board provides many advanced features for reduced power
consumption, fanless design and high cost/price rate of production.
Low Power Consumption
Based on the AMD Geode GX533@400MHz processor onboard, it only takes up to 8.4W
at maximum powering, and is completely suitable for fanless design. Without any cooling
fan onboard, it can avoid the heat problem when the cooler failed in accidence.
Onboard TTL/LVDS LCD interface
Based on the AMD Geode GX533@400Mhz of integrated graphics, the board provides
onboard graphics with up to 4/8/12/16 MB of frame buffer, 18-bit/24-bit LVDS and 24-bit
TTL interfaces.
Embedded Component
Due to the low profile design, the board provides PCMICA card Bus, CF card socket for
flash disk with porting embedded OS and up to 512MB of DDR SO-DIMM.
Single Voltage Input
The board only requires DC 12V input; user’s can easily connect the board with an adapter
without the huge power supply.
6 Product Overview
3307620 User’s Manual Introduction
1.2 <Product Specification>
General Specification
Form Factor 3.5 inches embedded motherboard
CPU Embedded AMD Geode GX533 400MHz
Fanless with heatsink only
Memory 1 x 200-pin DDRSO-DIMM up to 512MB
Unbufferred, none-ECC memory supported only
Chipset AMD Geode CS5535
USB Port Two internal USB1.1 ports
BIOS Phoenix-Award PnP flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer
Real Time Clock Chipset built-in RTC with lithium battery
Enhanced IDE One Ultra DMA33 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
Multi-I/O Port
Chipset WINBOND W83627HF
Serial Port One external RS232 and one internal RS232
Parallel Port One 26-pin internal parallel port
Floppy Port One slim type Floppy port
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel
GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O
interface
Hardware
Monitor
VGA Display Interface
Fan speed, CPU temperature and voltage monitoring
Chipset AMD Geode GX533 built-in VGA controller with 2D engine
Memory BIOS selectable up to 4/8/12/16 MB shard with system memory
Display Type CRT, LCD monitor with analog display
18-bit/24-bit LVDS/24-bit TTL with LCD interface
Connector External DB15 female connector on rear I/O panel
Onboard 40-pin TTL connector
Onboard 40-pin LVDS connector
Onboard 5-pin backlight inverter connector
Solid State Disk Interface
Compact Flash 1 x Compact Flash Card Type I socket on solder side
DOM Onboard 44-pin IDE support DOM (Disk On Module)
PCMCIA Card PCMICA Type I/II slot
Product Specification 7
3307620 User’s Manual Introduction
Ethernet Interface
Controller Dual PCI based REALTEK 8100B controller
Type
10Base-T / 100Base-TX, auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector Two external RJ45 jack on I/O panel
Audio Interface
Controller REALTEK ALC201A AC97 codec
Output Interface Line-in, Line-out, CD-in, MIC-in
Connector Onboard 10-pin header
Expansion Interface
Mini PCI Onboard Mini PCI socket for Type III (32bit,33Mhz)
Power and Environment
Power
requirement
DC 12V input
1 x DC jack on I/O panel
1 x Onboard 4-pin 12V DC connector
Input Voltage 10.5V ~ 13V
Input Current 12V/0.7A 8.4W (board only)
Dimension 146mm x 101mm (L x W)
Temperature
Operating within 0 ~ 60oC (32 ~ 140oF)
Storage within -20 ~ 85oC (-4 ~ 185oF)
Driver support
Windows Windows XP/XPe, Win2000 and WinCE
Linux Kernel version 2.8 or later
Ordering Code
3307620A 3.5" Embedded Controller with onboard AMD GX533
400MHz processor, VGA, audio, dual LAN, USB, CF, TTL/LVDS
PCMAIC ,Mini PCI , GPIO
3307620B Same as 3307620A and with onboard DDR 128M
8 Product Specification
3307620 User’s Manual Introduction
1.3 <Mechanical Drawing>
Mechanical Drawing 9
3307620 User’s Manual Introduction
1.4 <Block Diagram>
AMD Geode GX533 Processor
VGA monitor
TTL/LVDS LCD
PCI/33Mhz
DDR SO-DIMM up to 512MB
Ultra DMA33 IDE
Arbitor
8100B
USB1.1 X 2
AC97 Audio
CS5535
IT8209
8100B
Floppy
PCMCIA
Serial Port
Parallel Port
GPIO
Mini PCI slot
IrDA
BIOS
10 Block Diagram
3307620 User’s Manual Hardware Setup
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
CN_IR IDE MiniPCI CD IN CN_USB JFRNT CN_LVDS
CN_AUDIO
CN_COM2
CN_LPT
CN_LCD
CN_SPWR
CN_12V
CN_DIO
JRTC
CN_JVLCD
CN_INV
DC_IN
JCRT/TFTSEL SYSFAN
PCMCIA
CF
Connector Location 11
3307620 User’s Manual Hardware Setup
2.2 <Jumper Location & Reference>
Jumper Function
JRTC RTC/CMOS Setting
JVLCD LCD Driving Voltage Setting
JCRT/TFTSEL Select CRT/TFT Setting
JRTC JVLCD
JCRT/TFTSEL
12 Jumper Location & Reference
3307620 User’s Manual Hardware Setup
2.3 <Connector Reference>
2.3.1 <Internal Connector>
Connector Function Remark
DIMM Onboard 200-pin DDR SO-DIMM socket Standard
IDE 44-pin primary IDE connector Slim
FDD 26-pin slim type floppy connector Slim
CN_12V 4-pin power supply connector Standard
CN_AUDIO 5 x 2-pin audio connector Standard
CDIN 4-pin CD-ROM audio input connector Standard
CN_DIO 6 x 2-pin digital I/O connector Standard
CN_USB 5 x 2-pin USB connector Standard
SYSFAN 3-pin system cooler fan connector Standard
CN_COM2 5 x 2-pin RS232 serial port Standard
CN_IR 5-pin IrDA connector Standard
CF Compact Flash Type I socket (Solder Side) Standard
PCMICA PCMICA Card bus Type I/II slot(Solder Side) Standard
LPT 26-pin parallel port connector Standard
CN_TTL 40-pin TTL LCD interface Standard
CN_LVDS 20-pin LVDS LCD interface Standard
CN_INV 5-pin LCD backlight inverter connector Standard
CN_SPWR 4-pin 5V/12V power output connector Standard
JFRNT 14-pin front panel switch/indicator connector Standard
2.3.2 <External Connector>
Connector Function Remark
VGA DB15 VGA connector Standard
RJ45_1/2 RJ45 LAN connector Standard
COM1 Serial port connector Standard
PS2 PS/2 Keyboard/Mouse connector Standard
DC_IN DC 12V input jack Standard
Connector Reference 13
Loading...