Global American 3301500 User Manual
3301500 User’s Manual
Version 1.0
5.25" Embedded Controller with Socket 479
Copyrights
This document is copyrighted and all rights are reserved. It does not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or
machine readable form in whole or in part without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental
or consequential damages arising from the use of inability to use the product or
documentation, even if advised of the possibility of such damages. The manufacturer
keeps the rights in the subject to change the contents of this document without prior
notices in order to improve the function design, performance, quality and reliability. The
author assumes no responsibility for any errors or omissions, which may appear in this
document, nor does it make a commitment to update the information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are mentioned
for identification purposes only, and may be trademarks and/or registered trademarks of
their respective companies or owners.
Table of Contents
Chapter 1 Gerneral Description…………………….1
1.1
Major Features ..............................................................2
1.2
Specifications ...............................................................2
1.3
Board Dimensions........................................................4
Chapter 2 Unpacking………………………………..5
2.1
Opening the Delivery Package....................................5
2.2
Inspection......................................................................5
Chapter 3 Hardware Installation…………………...7
3.1
Before Installation ........................................................7
3.2
Board Layout ................................................................8
3.3
Jumper List ...................................................................9
3.4
Connector List ..............................................................9
3.5
Configuring the CPU ..................................................10
3.6
System Memory ..........................................................10
3.7
VGA Controller............................................................10
3.8
PCI E-IDE Drive Connector........................................ 11
3.9
Floppy Disk Drive Connector ....................................14
3.10
Serial Port Connectors...............................................15
3.11
Parallel Connector......................................................15
3.12
Ethernet Connector ....................................................16
3.13
USB Connector ...........................................................16
3.14
CMOS Data Clear ........................................................17
3.15
Power and Fan Connectors.......................................17
3.16
Keyboard/Mouse Connectors ...................................18
3.17
System Front Panel Connectors...............................18
3.18
Audio Connectors ......................................................19
3.19
IrDA Connector ...........................................................19
3.20
Watchdog Timer..........................................................19
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity.
To avoid damaging chips from electrostatic discharge, observe the
following precautions:
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion
of the system unit chassis for a few seconds. This helps to discharge any
static electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR
clip of the strap to the end of the shielded wire lead from a grounded
object. Please wear and connect the strap before handling the
3301500
to protect yourself from the discharge of any static electricity through the
strap.
Please use an anti-static pad when putting down any components or
parts or tools outside the computer. You may also use an anti-static bag
instead of the pad. Please inquire from your local supplier for additional
assistance in finding the necessary anti-static gadgets.
NOTE:
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENT WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
1
Chapter 1
General Description
The 3301500 is an Intel
®
82855GME/ICH4 chipset-based board
designed for PCI Bus PGA 479 Intel
®
Pentium® M 1.2~1.7GHz CPU
compatibility. These features combine and make the
3301500 an ideal
all-in-one industrial single board computer. Additional features include
and enhanced I/O with CRT/LVDS Panel, Giga LAN, audio and
USB2.0 ports interface.
Its onboard ATA/33/66/100 to IDE drive interface architecture allows
the
3301500 to support data transfers of 33, 66 or 100MB/sec. to each
IDE drive connection. Designed with the Intel
®
82855GME/ICH4 core
logic chipset, the board supports all PGA 479 Pentium
®
M CPU series
operating 1.2~1.7GHz. The display controller is Intel
®
82855GME
supporting CRT display up to 1600 x 1200, and also provides 24-bit
single channel LVDS panel interface.
System memory is also sufficient with one DDR socket that can support
up to 1GB.
Additional onboard connectors include an advanced USB2.0 port
providing faster data transmission, and one RJ-45 connector for
10/100 Base-TX Ethernet use.
2
1.1 Major Features
The 3301500
comes with the following features:
PGA 479 for Intel® Pentium® M 1.2~1.7GHz
Supports 400MHz FSB
One DDR socket with a max. capacity of 1GB
Intel
®
82855GME/ICH4 system chipset
Winbond W83627HF super I/O chipset
Intel 82855GME CRT display controller
Intel 82540 100/1000 Based LAN
AC97 3D audio controller
Fast PCI ATA/33/66/100 IDE controller
Two COM, six USB2.0 connectors
Supports LVDS Panel interface
Supports Hardware Monitor function
1.2 Specifications
CPU: PGA 479 for Intel® Pentium® M 1.2~1.7GHz
Bus Interface: PCI Bus
Front Side Bus:
Supports 400MHz FSB
Memory: One DDR socket supporting up to 1GB (DDR-200/DDR-266)
Chipset: Intel® 82855GME/ICH4
I/O Chipset: Winbond W83627HF
PCI Slot:
One standard PCI slot
VGA: Intel 82855GME supporting CRT display up to 1600 x 1200
Panel Display:
Supports 24-bit single channel LVDS Panel interface
LAN: Intel
®
82540 100/1000 Based LAN
Audio: AC97 3D audio controller
IDE: Four IDE disk drives supporting ATA/33/66/100 and with transfer
rates of up to 33/66/100MB/sec.
FDD: Supports one slim floppy disk drive
3
Parallel: One enhanced bi-directional parallel port supporting
SPP/ECP/EPP
Serial Port: 16C550 UART-compatible RS-232 x 2 serial ports with
16-byte FIFO
IrDA: One TX/RX IrDA header
USB: Supports six USB2.0 connectors
Keyboard/Mouse: PS/2 6-pin Mini DIN
BIOS: Award PnP Flash BIOS
Watchdog Timer:
Software program time-out intervals from 1~256
sec.
CMOS: Battery backup
Power Connector:
One 8-pin +5V/+12V ATX power connector
Temperature:
0~60°C (operating); -20~+80°C (storage)
Humidity:
10~90%; non-condensing (operating)
Hardware Monitor: Winbond W83627HF
Board Size: 20.3 x 14.6 cm
Loading...