Global American 2801020 User Manual
2801020 User’s Manua l
Version 1.1
Mini-ITX Motherboard supporting Intel Pentium M / Celeron M
Copyrights
This document is copyrighted and all rights are reserved. It does not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or
machine readable form in whole or in part without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental
or consequential damages arising from the use of inability to use the product or
documentation, even if advised of the possibility of such damages. The manufacturer
keeps the rights in the subject to change the contents of this document without prior
notices in order to improve the function design, performance, quality and reliability. The
author assumes no responsibility for any errors or omissions, which may appear in this
document, nor does it make a commitment to update the information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are mentioned
for identification purposes only, and may be trademarks and/or registered trademarks of
their respective companies or owners.
Copyright
Copyright 2005, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of t he manufacturer.
All trademarks and/or registered trademarks contains in this document are property of
their respective owners.
Disclaimer
The company shall not be li able for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or impli ed, including
without limitation implied warranties of m er chantabilit y or fitness for a partic ular purpose.
The com pany has the right to revise the manual or include changes in the specificati ons
of the product described within it at any time without notice and without obligation to
notify an y person of such revision or changes.
Tradema rk
All trademarks ar e the property of their respective holders.
Any questions please visit our w ebsite at http://www.globalamericaninc.com
2
Packing List:
Please check t he package content before you starting using t he board.
Hardware:
2801020 motherboard x 1
Cable Kit:
44-pin
44-pin
40-pin
A T A33 IDE Cable x1
Floppy Cable x 1
SA TA Cable x 1
SDTV Cable x 1
YPbPr Cable x 1
COM port Cable x 1
I/O Shield x 1
CPU Cooler x 1
Printed Matters:
User’s M anual x 1
Driver CD x 1
4-pin to 4-pin Power Cable x 1
3
Index
Chapter 1 <Introduction> ................................................................................ 7
1.1 <Product Overview>............................................................................ 7
1.2 <Product Specification> ...................................................................... 8
1.3 <Mechanical Drawing>...................................................................... 10
1.4 <Block Diagram>............................................................................... 11
Chapter 2 <Hardware Setup>........................................................................ 13
2.1 <Connector Location> ....................................................................... 13
2.2 <Jumper Location & Reference> ...................................................... 14
2.3 <Connector Reference> .................................................................... 15
2.3.1 <Internal Connectors> ........................................................... 15
2.3.2 <External Connectors>.......................................................... 15
2.4 <CPU and Memory Setup> ............................................................... 16
2.4.1 <CPU Setup> ........................................................................ 16
2.4.2 <Memory Setup> ................................................................... 17
2.5 <CMOS Setup> ................................................................................. 18
2.6 <Enhanced IDE Interface> ................................................................ 19
2.7 <Serial ATA Interface>....................................................................... 19
2.8 <Floppy Port>.................................................................................... 20
2.9 <Ethernet Interface> ......................................................................... 21
2.10 <Onboard Display Interface> .......................................................... 22
2.10.1 <Analog Display> ................................................................ 22
2.10.2 <Digital Display>.................................................................. 23
2.10.3 <HDTV Interface>................................................................ 27
2.11 <Integrated Audio Interface> ........................................................... 28
2.12 <GPIO Interface> ............................................................................ 30
2.13 <Power Supply> .............................................................................. 31
2.13.1 <Power Input> ..................................................................... 31
2.13.2 <Power Output> .................................................................. 32
2.14 <Switch and Indicator>.................................................................... 33
4
Chapter 3 <System Setup> ........................................................................... 34
3.1 <Video Memory Setup> .................................................................... 34
Appendix A <I/O Port Pin Assignment>....................................................... 38
A.1 <IDE Port> ........................................................................................ 38
A.2 <Serial ATA Port>.............................................................................. 39
A.3 <Floppy Port> ................................................................................... 39
A.4 <IrDA Port> ....................................................................................... 39
A.5 <Serial Port> ..................................................................................... 40
A.6 <VGA Port>....................................................................................... 41
A.7 <LAN Port> ....................................................................................... 41
A.8 < USB Interface > ............................................................................. 41
Appendix B < Flash BIOS>……………………………………………………….42
B.1 <Flash Tool> ..................................................................................... 42
B.2 <Flash BIOS Procedure> ................................................................. 42
Appendix C <System Resourc es>………………………………… ..43
C.1<I/O Port Address Map>…………………………………………………43
C.2<Memory Address Map>………………………………………………..45
C.3<System IRQ & DMA Resources>……………………………………..46
Contact Information..................................................................................... 487
5
6
(This Page is Left for Blank)
Chapter 1 <Introduction>
1.1 <Product Overview>
2801020 is t he new generation of the Mini-ITX motherboard, with supporting last Intel
Pentium M processors for 533MHz front side bus, Intel 915GME and ICH6-M chipset,
integrated GMA900 graphics, DDR2 memory, REALTEK High Definition Audio, Serial
ATA, PCI Express 16x interf ace and dual Gigabit LAN.
New Intel Pen tium M Processor
The board supports last Intel Pentium M processors with 533MHz front side bus, 2MB
L2 cache, to provide more powerful performanc e than before.
New fe atures for In tel 915GME chipset
The boar d i ntegrates Intel 915GME and ICH6-M chipset, to provide new generation of the
mobile solution, supports Intel GMA900 graphics, DDR2 400/533 memory, built-in high
speed m ass storage interface of serial ATA, Hi gh Definition Audio with 7.1 channels
surrounding sound.
All in One multimedia solution
Based on Intel 915GME and ICH6-M chipset, the board provides high performance
onboard graphics, 18-bit dual channel LVDS interface, HDTV and 7.1 channels High
Definition Audio, to meet t he very requirement of the multimedia application.
Flexible Extension Interface
The board provides one PCI-Express 16x slots for graphics card, it also can support
PCI-Express 1x for LAN card or other devices. The board also provides one PCMCIA
Type II slot, Compact Flash Type I slot and one mini-PCI slot.
7
1.2 <Product Specification>
General Specification
Form Factor Mini-ITX motherboard
CPU Intel®Pentium M /Celeron M
processors
Package type: FC-PGA478
L2 Cache: 512KB/1MB/2MB
Front side bus: 400/533MHz
Memory 2 x 240-pin DDR2 400/533MHz SDRAM up to 2GB
Up to 8GB/s of bandwidth with dual-channel interleaved mode
Dual-Channel technology
supported
Unbufferred, none-ECC memory supported only
Chipset Intel® 915GME (Northbridge) and ICH6-M (Southbridge)
BIOS Phoenix-Award v6.00PG 4Mb PnP flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer with 1 ~ 255 sec./min. of
timeout value
Real Time Clock Intel® ICH6-M built-in RTC with lithium battery
Enhanced IDE UltraDMA33 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
One CompactFlash Type I socket on solder side
Serial ATA Intel® ICH6-M integrates 2 Serial ATA interfaces
Up to 150MB/s of transfer rate
Multi-I/O Port
Chipset Intel® ICH6-M with Winbond® W83627THF controller
Serial Port Two external and two internal RS-232 serial ports
USB Port Six Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
Parallel Port None
Floppy Port One slim type Floppy port
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel
GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O interface
Smart Fan One CPU fan connectors for fan speed controllable
VGA Display I nterface
Chipset Intel® 915GME GMCH (Graphic Memory Controller Hub)
Frame Buffer Up to 128MB shared with system memory
Display Type CRT, LCD monitor with analog display
Onboard 18-bit dual channel LVDS interface
Onboard HDTV interface
Connector External DB15 female connector on rear I/O panel
Onboard 40-in LVDS connector
Onboard 8-pin TV-out connector
8
Ethernet Interface
Controller Marvell E8053 PCI Express Gigabit Ethernet controller
Ty pe Triple speed 10/100/1000Base-T
auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector Dual External RJ45 connectors with LED on rear I/O panel
Audio Interface
Chipset Intel® ICH6M with Realtek® ALC880 codec
Intel High Definition Audio compliance
Interface 7.1 channels sound output
Connector External Audio phone jack for Line-out, Line-in, MIC-in, Surround, Center
and Backsurround
Onboard audio connector with pin header (built-in amplifier for speaker
out)
Onboard CD-IN connector
Expansive Interface
PCI-Express One 16x PCI-Express slot (
compatible with 1x slot
)
Up to 8GB/s of transfer bandwidth
Power supply: +3.3V, +12V
PCI One Mini-PCI socket for
TYPE III
(32-bit, 33MHz)
Power supply: +3.3V, +5V
PCMCIA One PCMCIA Type II slot on solder side with RICOH R5C475II controller
Power and Environment
Power
Requirement
DC 12V input with external DC mini DIN or onboard 4-pin connector
Input Range 10.5V ~ 13V
Dimension 170 (L) x 170 (H) mm
Temperature Operating within 0 ~ 60oC (32 ~ 140oF)
Storage within -20 ~ 85oC (-4 ~ 185oF)
Ordering Code
2801020
Intel Pentium M platform with onboard VGA, HD audio, SATA
USB2.0, LVDS, HDTV, PCI-Express, Mini-PCI, CF, PCMCIA
4 x COM
3907643
PCI-Express add-on card for single DVI interface
The specifications may be different as the actual production.
For further product information please visit the website at http://www.globalamericaninc.com
9
1.3 <Mechanical Drawi ng>
10
1.4 <Block Diagram>
Intel Pentium M/Celeron M Processors
Intel GMA900 Graphics
PCI-Express x16
LVDS
HDTV
Compact Flash
915GME
2 x 240-pin DDR2
400/533MHz up to
2GB
2 x Serial ATA ports
UltraDMA33 IDE
PCI Express 1x
6 x USB2.0 ports
ICH6-M
PCI
HD Audio
Marvell E8053
Gigabit LAN
Mini-PCI slot
PCMCIA
4 x Serial ports
1 x Floppy ports
BIOS
8-bit GPIO
IrDA
11
(This Page is Left for Blank)
12
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
Solder side: CF CARDBUS
CN_AUDIO SPDIF CDIN CN_IR MINIPCI CN_USB PWRIN
PEG
SATA1
SATA2
CN_LVDS
CN_DIO
CN_COM
34
CPUFAN
CN_TV
CPU
IDE
FDD
SYSFAN CN_INV CN_BPWR DDRIIB/A JFRNT
VGA
DC_IN COM1/2 USB_RJ45_A/B KB MS AUDIO
13
2.2 <Jumper Location & Reference>
Jumper Function
JRTC CMOS Operating/Clear Setting
JCFSEL CF with IDE mode selection
JVLCD Panel Voltage Setting
JCFSEL
JVLCD
JRTC
14
Loading...