Page 1
Installation and
Operation Manual
Please read the explanation carefully before use it.
2.4G Digital Wireless Camera
With Quad USB Receiver
1
2
3
4
(ROO4M+P009TM)
S-B004M5000001 R004M+P009TM 105X142mmx16P,80g
Page 2
Features
Motion detection
4 channel selected
Video/Audio
Metal case
Quad function
Recorder function
Remote monitoring
Connect the receiver with the USB port on your computer. The windows hardware
wizard installs the receiver driver to your computer. If the hardware wizard can
not find the driver, Please manually install the software.
Software Installation
1
Package list
1
2
3
4
1.It can reduce or increase the quantity of camera according to client's
request. Connect max 4pcs camera
2.When switch to quad mode, the sound will be shielded
Page 3
4. Interface Basics
This sections gives you a brief introduction about the various interfaces.
4.1 Main Window
,
Takes a snapshot of the camera s view
2 3
Snapshot
Detect
Web sever
Setup
Playback
Enters the playback mode to view recorded videos
Enters the setup option of BlueJay Viewer
Enables web server mode for remote viewing
Controls the viewer to go into detection mode or standby mode
1
5
2
3
4
1. Monitoring Screen:
,
This will display the camera s view. Depending on the configuration, you can
have different type of viewing methods on this screen.
This icon indicates that the camera is monitoring
This icon indicates that the camera is in standby mode
This icon indicates that the camera is recording
,
This icon indicates that the camera s audio is enabled
3. Option Menu: This area allows you to do the following.
2. Channel Status: This area will display the status of individual cameras.
4. Camera/Screen Control: This area controls the following:
Displays the signal strength of wireless cameras
Cruise camera to let it automatically move on its own
Opens the snapshot folders to view captured pictures
Adjusts the screen size on the monitoring screen
Displays one channel on the monitoring screen
Displays multiple channels on the monitoring screen
Cycles the camera to see all area
,
5. Channel Information: Displays the current channel s information
System Requirements
Device
CPU
RAM
Network
Resolution
IP Cam
Operating Software
Pentium 4 3.0 GHz or above
1 GB or above
Ethernet Port
1024 x 768 (24 bits)
1 or more
Windows XP or Vista
512 MB or above
Ethernet Port
800 x 600 (24 bits)
1 or more
Windows 2000
Windows Media Player 9
Windows Media Player
Pentium 4 2.0 GHz or above
Windows Media Player 9 or above
Minimum Recommended
Match code
Open the rubber cover to expose match button. Use tweezers or sharp tool
to setting the frequency .
Match button
CHCH
The first use need to match code, Press the icon show the dialog box as below:
Select a camera with you want to match, then
press the match button on the camera about 3
seconds. if the matching success , the window
displays image of the surveillance camera .
Page 4
1. Language Support: Changes the interface of the Wireless Guard to the
language selected.
2. Mail Server: The mail server settings for users who wish to use the E-mail
notification when detection occurs
3. Start Up Options: Allows user to pre -determine start up options including:
Start Detecting: Starts the viewer in detection mode
Start Web Server: Starts the viewer web server
4. Recurring recording: Records over older files to save space for the hard disk
5. Storage Locations: Locations of where the files are being saved for recorded
videos and captured images
6. Web Service: Configuration settings for the web server
IP Address: The IP address of the web service for the viewer
Web Server Port: The port for the web service
Web Server Account: Default is user
Web Server Password: Password for the web service
Server Port: The port for the MMS service
Server Channel: The channel for the MMS service
5
7. System Setting
4
1
2
3
4
5
6
Press web server icon of main screen, and open the IE browser to input
http: \\web server IP:7788, then appear the below dynamic image.
Web server
MMS Server
If you can't see image please Installation the Java software
If you can't see image please Installation the Java software
The IE browser is without audio monitoring. If you need to monitor with audio
images, the system provides a second control method: Open windows media
player , in the menu bar select "File" select "Open URL ... ..." option. In the pop-
up window, enter http://192.168.1.106:8080/ point to confirm, with audio remote
control image display OK.
Page 5
7
1. Choose from the following to adjust the image:
Flip Horizontal: Flips the image horizontally
Flip Vertical: Flips the image vertically
Rotate: Rotates the image accordingly with rotation angle and direction
2. Adjust video parameters to process brightness, saturation, and gamma.
6
Basic Settings
1. Name and note: Defines a personal name and description of the camera
2. Text Display: Allows customization of what information can be displayed on the
,
channel s screen
Channel Information: Check it to show channel number and channel name
Date Time: Check it to show date, time, and week
Font Size: Adjusts the size of the font being displayed
Text color: The text color on the screen
Background: The text background color on the screen
Watermark: Check for attaching a watermark image on the screen
Image Adjust
This section sets up how recording will be performed under recording mode.
Record Setting
1. Image Quality: Adjusts the quality of the recording format
Resolution: Adjust the recording image size
Quality: How detailed the recording of the image
2. Surveillance Mode: Adjusts the type of recording it would be trigged with
First Selection Details:
,
Schedule: Will go into detection mode and record on user s configured
schedule
Record-at-click: Once in detection mode, it will record in either full time
or on detection
Non-record: Will only monitor in detection mode, no recording will be done
Second Selection Details:
Full-time: Will always record
Triggered: Will record a time frame when viewer detects movement
3. Schedule Based: If Schedule is chosen from mode, user can preset a
time to record .
Add new Schedule: To add a schedule
Edit Schedule: To edit an existing schedule
Delete Schedule: Deletes a selected schedule
1 2
3
If the camera is mounted in a special way, the section can adjust the image
accordingly.
1
2
1
2
Page 6
98
1. Choose the start time of Scheduling Type Monthly.
2. Choose the end time of Scheduling Type Monthly.
3. Select the icon Operative Period to specific period.
4. Select the icon to setup month day of Monthly
Scheduling.
1. Choose the start time of Scheduling Type Weekly.
2. Choose the end time of Scheduling Type Weekly.
3. Select the icon Operative Period to specific period.
4. Select the icon to setup weekday of Weekly
Scheduling .
1. Setup the start time of Scheduling Type daily.
2. Setup the end time of Scheduling Type daily.
3. Select the icon Operative Period to specific
period.
1. Setup the start date and time of Scheduling
Type Periodically .
2. Setup the end date and time of Scheduling
Type Periodically.
Select the icon recording, and the next, Add new Schedule, then appear the
below image
This section will be available if the recording option is set to triggered, this
particular area allows user to customize sections of detection and the
sensitivity.
Motion Detect
1. Displayed Screen: Hit the Refresh View button to refresh the image.
2. Block Setting: Allows custom areas to detect on the displayed screen
Full-area detection: Detects all areas on the screen
Custom detection: Detects user created detection blocks
Add new block: Create a new block to detect, do this by holding down the
right mouse button over the displayed screen area to create a new block
Delete a block: Select a block on the displayed screen and hit this button
to delete it
Clear all blocks: Deletes all blocks on the displayed screen
Test Motion detect: Test the detection by moving an object in front of the
camera, the blocks should change color when it detects motion
3. Sensitivity: Adjust the sensitivity of the blocks
1
2
3
Add new Schedule
Periodically
Daily
Weekly
Monthly
Page 7
11
10
Alert Setting
This section will be available if the recording option is set to triggered, this
particular area allows the user to set notification options in the even the
viewer detects motion.
1. Vibrational alert: When enabled, it vibrates the whole viewer when motion
is detected
2. Message alert: When enabled, it prompts a message alert on viewer when
motion is detected
3. Sound alert: When enabled it will playback the chosen sound when motion
is detected
4. E-mail alert: When enabled, a message will be sent based on the
information filled out
1
2
3
4
This section allows users to playback and search through the recorded
videos.
1. Screen: This area will display the video output from the recording
2. Time and channel selection: This filters out when and which channel to be
listed in the Record List , hit the Query button to bring up the list once selected
the proper times and channel.
3. Record list: This area is where you choose the video and have the option to
delete it and open the file directory of your videos
4. Video tracker: Use this to track through your video
5. Playback controls: (From left to right)
Play / Stop / Previous track / Rewind / Fast forward / Next track
/ Playback speed (1x, 2x, 4x, 8x, 16x)
6. Capture options: Use the camera to capture a picture on the main display
screen and use the folder to access the captured picture(s)
Playback
1
2
3
65
4
Page 8
12
13
Q: Why are some of the camera and/or screen control not accessible?
A: Some of the controls can only be accessed when in single screen mode.
Also, you will need tobe out of the detection mode in order to access them
as well.
Q: Why can I not access the settings and playback?
A: You need to be out of detection mode in order to access these settings.
,
Q: Why can t I pan, tilt, and/or zoom?
A: These can only be done by going into single screen mode or that the
camera itself does not support pan, tilt, and/or zoom.
,
Q: I don t have static IP address, can I used DDNS?
A: This program supports DDNS, but you can still access it through IP
address or DNS address.
Q: Why does the viewer not start recording after going into detection mode?
,
A: Double check the channel s recording setup. Make sure that the
,
recording options you set are the correct ones. If it s full-time, it should
record all the time. If triggered, it will record only when camera detects
movement.
,
Q: When I enabled the web server, I can t preview the image of the camera
from other PCs. Why?
A: Please check if the local area connection has the firewall blocking that
particular program and that the IP address is correct.
Q: What does can not connect to following channel(s): CH** mean?
A: It means the viewer can not detect the IP camera. It could be caused by a
bad network setup, make sure that your network is configured correctly.
Q: What does can not import to the following channel(s): CH** mean?
A: It means that another web server is conflicting with another IP address.
Double check your IP address assignment on all your network devices.
Q: What does no buffer space error and virtual RAM insufficient mean?
A: It means your computer is running low on resources (typically means that
your RAM is insuficient). Upgrading your memory will most likely address
this issue. Again, we strongly recommend systems to be equipped with 1
GB of RAM.
Q&A
Specification
General
Operating Frequency 2400~2525
Unobstructed Effective Range 100m(Min.)
Operating Temperature
Operating Humidity 85%RH
-10 ~ +50
Power Supply
Image resolution
Video resolution(VGA)
Imaging Sensor Type
View Angle
Night Vision Range
Consumption Current
Power Supply
Image Forma
Video Format
Receive
5V
CMOS
45
3~5M
350 50mA
DC +5V
JPEG
640x480
WMV
640x480
Camera
Item Value
Loading...