Page 1
UPRIGHT VACUUM
globalindustrial.ca
D
istribucion Industrial Globales S DE RL DE CF
Assembly Instructions Instrucciones de Ensamblaje Directives d’assemblage
g
glo
Assembly Instructions
Customer Service
US: 1-800-645-2986
globalindustrial.ca
Assembly Instructions Instrucciones de Ensamblaje
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
México: 01.800.681.6940
globalindustrial.ca
Instrucciones de Ensamblaje
Servicio de atención al Cliente
México: 01.800.681.6940
D
istribucion Industrial Globales S DE RL
Instrucciones de Ensamblaje
Servicio de atención al Cliente
ectives d’assemblageDir
Service à la clientèle
Canada: 888-645-2986
DE CFDistribucion Industrial Globales S DE RL
ectives d’assemblage
Service à la clientèle
Canada: 888-645-2986
US: 1-800-645-2986US: 1-800-645-2986
México: 01.800.681.6940
México: 01.800.681.6940 Canada: 888-645-2986Canada: 888-645-2986
12-INCH CLEANING PATH
Call 1-800-645-2986
Model 641287Global Equipment Company
Page 2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
Do not use outdoors or on wet surfaces.
Do not use with damaged cord or plug. If vacuum cleaner is not working
as it should, has been dropped, damaged, left outdoors or dropped into
water, return it to a service center before using.
Close supervision is necessary when any appliance is used by or near
children. Do not allow vacuum cleaner to be used as a toy or to run
unattended at any time.
Keep hair, loose clothing, fingers, feet and all parts of body away from
openings, rotating agitator and other moving parts.
Do not operate cleaner in bare feet or when wearing open toe shoes or
sandals.
Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
Avoid picking up hard, sharp objects with the cleaner. They may damage
the cleaner and the bag.
Do not use without dust bag or dirt cup in place. Shake bag and empty
dirt cup frequently when picking up very fine materials such as powder.
Use extra care when cleaning on stairs.
Do not put any objects into openings. Do not use with an opening blocked.
Keep free of dust, lint, hair or anything that may reduce air flow.
Do not pull or carry by cord, use cord as a handle, close door on cord or
pull cord around sharp edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.
Always disconnect cord from electrical outlet before servicing the cleaner.
Unplug cleaner when not in use. Turn off all controls before unplugging.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Never handle plug or appliance with wet hands.
SAVE THESE INSTRUCTIONS
1
Page 3
HOW TO ASSEMBLE THE GLOBAL INDUSTRIAL VACUUM
upper handle
A Unpack The Enclosed Packet
Enclosed in a packet are two nut and bolts
for the handle and one upper (larger) and
lower (smaller) plastic cord hooks. An extra
drive belt is included.
B Assemble Handle
Place lower handle into the handle
socket. Take upper handle and slide
on top of lower handle. Make sure
holes align for nut and bolts. Make
sure upper handle curves towards
back of vacuum cleaner. Insert nut
and bolts and tighten.
B
upper clip
C
A
D
cloth bag
lower clip
lower handle
C Upper Cord Hook And Lower Cord Hook Assembly
Take lower cord hook with vacuum facing frontwards and snap into slot on
lower handle with hook facing down. Make sure cord is in cord slot before
clip is snapped in. Take upper cord hook and place cord with spring retainer
into slot and snap in. Wrap cord around cord clips.
spring
1. Place Inner tab
into slot
2. Press hook
around handle
3. SNAP opposite inner
tab into place
BAG
SUPPORT
HOOK
2
Page 4
D Install The Bag
Take lower part of cloth bag with latch and bag adapter clip and align with back
of vacuum. Bring the bag collar forward and turn latch so bag locks onto the rivet.
Take spring from cloth bag and attach to support on upper cord hook.
3
Page 5
HOW TO USE VACUUM
The GLOBAL INDUSTRIAL vacuum cleaner is designed to be used on many types
of carpeting and floor.
A Adjusting Handle Back and Forth
Simply step on the wide area foot release pedal and lower handle. Press down
again and handle will go down to floor level. This will enable you to clean
underneath furniture.
B On/Off switch foot activated
Step on the power switch located on
top of the heavy duty metal hood. Press
down with foot and power will go on.
Step again on the top of the switch and
power will shut off.
C Electric cord storage
Always wrap cord around cord hooks and fasten cord to prevent unwinding.
4
Page 6
Large, Easy to Turn Adjustment Knob For Carpet Pile Height
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts
of body away from any moving part (such as the revolving brush). Turn off the
switch and unplug the cleaner before changing the cleaner height setting.
Adjust the vacuum cleaner height setting to match the carpet pile height. Refer to the
following chart of recommended settings for carpet types.
While vacuum cleaner is off and unplugged from the outlet, turn the extra large
adjustment knob to desired setting. If vacuum is hard to push on setting while in
operation, simply shut off cleaner and unplug from outlet. Turn dial to next setting and
continue testing the setting until vacuum is comfortable to move and effective cleaning
is desired.
5
Page 7
Maintenance
D
isconnect vacuum from electrical outlet before attempting to service it in any
m
anner.
The instructions given in this booklet serve as a guide to routine maintenance. To avoid
unnecessary service calls, check the bag, belt and brush roll often.
Clear Fan Chamber Instructions
The removable clear fan chamber enables the user of the vacuum cleaner to
observe if any obstructions, dirt buildup, broken fan, broken belt or any other
maintenance issue needs to be addressed. It is recommended that a qualified
vacuum repair specialist repair maintenance issues.
CAUTION: When changing the belt please be careful. The pulley is heated after
motor was running.
6
Page 8
Brush Roll Belt
When to replace belt.
NOTE: Turn off the switch and unplug the electrical cord before replacing belt.
Belt pulleys can become hot during normal use. To prevent burns, avoid
touching the belt pulley when servicing the drive belt.
The belt on the vacuum drives the brush roll to clean the carpet. Make sure to check if
the belt is not stretched, cracked or worn. It is recommended to change the belt if any
of the above should happen.
IMPORTANT: Improper installation of the brush roll or brush roll belt could cause
carpet or cleaner damage.
A. Turn back locks to remove metal
bottom plate.
B. Remove belt from pulley. Lift up
brush roll and remove from
vacuum, take off belt.
C. Put new belt on center of brush
roll.
D. Set brush roll back in place in
vacuum and align belt with the
belt guide.
E. Pull belt over pulley and set. Rotate pulley to make sure belt is riding
smooth on motor pulley.
F. Put bottom plate back on and lock back in with both locks.
7
Page 9
How To Empty Cloth Bag
NOTE: Turn off the switch and unplug the electrical cord before servicing the
bag. Never operate the vacuum cleaner without the dust bag.
A. Unlock spring from top clip
B. Unlatch bag from vacuum
C. Remove slide and spring from top
of cloth bag
D. Empty contents into the appropriate
container
E. Put slide and spring back on the
top of cloth bag
F. Reinstall cloth bag back on vacuum
Picking up fine powders, substrates or carpet fresh powders can clog the cloth
bag - Please remember to empty bag often so that vacuum cleaner can operate
more efficiently.
8
Page 10
THE GLOBAL INDUSTRIAL
LIMITED WARRANTY
WHAT THIS WARRANTY COVERS
Your GLOBAL INDUSTRIAL cleaner is warranted to be free from
all defects in material and workmanship in normal use FOR A
PERIOD OF ONE YEAR. The warranty is granted only to the
original purchaser of the cleaner. The warranty is subject to the
following provisions.
WHAT THIS WARRANTY DOES NOT COVER
• Parts of the cleaner that require replacement under normal use,
such as bumpers, bags, bristle strips, belts and impellers.
• Damages or malfunctions caused by negligence, abuse or use
not in accordance with the Owner’s Guide.
• Defects or damages caused by unauthorized service or the use of
other than GLOBAL INDUSTRIAL parts.
GLOBAL INDUSTRIAL will, at its option, repair or replace a
defective cleaner or cleaner part that is covered by this warranty.
As a matter of warranty policy, GLOBAL INDUSTRIAL will not
refund the consumer’s purchase price.
GLOBAL INDUSTRIAL does not recognize internet sales, the warranty
is null and void if the unit is purchased on a non-authorized site.
The warranty is null and void if the user does not use original
GLOBAL INDUSTRIAL original paper bags as well as any parts.
9
Loading...