1
2
Matrix Manual
This is a 5 X 5 lighting equipment, with 255 scenes more, 146 built-in already.
These units have four DMX work modes: 4CH, 9CH, 25CH, 29CH. Please read
carefully before operation.
3
4
29CH mode: 1.ch3≠00, ch2 and CH5-CH29 invalid.
2. CH3=00 AND CH2≠00, CH5-CH29 invalid.
3. CH3=00 AND CH2=00, CH5-CH29 valid.
4CH & 9ch mode:
1. CH3≠00, ch2 invalid.
2. CH3=00, CH2 valid
29CH, 9CH, 4CH:DMX CHANNELS 3 and 4 FUNCTIONALITY
Channel 3 and channel 4:
CH3: DINAMIC Macros
In channel 4 we will have also stored some BUILT IN effects, but in this case, are not
static, each value of the channel corresponds to a CHASE with various steps.
Maximum number of steps of one chase is 35. The chase will loop, it means when
the chase is finished will start again.
CH3: DYNAMIC PROGRAM: 1. 001-043: 43 built-in programs;
2. 044-127: No program;
3. 128-230: 103 built-in programs;
4. 231-255: No program;
Example: CHANNEL 3 VALUE 001: We will store the following sequence:
“PIXEL MATRIX DESIGNED BY G-LITES”
THIS IS A CHASE OF 30 STEPS: First step corresponds to “C”, 2nd to “O”, and so
on till the last step. After the last step, the chase restarts again.
CH4: Speed
With channel 4 we control the speed of channel 3, and the direction of the chase, if
it is running FORWARD OR REWIND (BACKWARD) WITH channel 4 we can
control the speed of channel 3
Values:
• Value 000-050: STOP
• Value 051 - 150: 0.1S-10S FORWARD SPEED
• Value 151 - 250: 0.1S-10S REWIND SPEED
• Value 251-255: STOP
Example:
Imagine in channel 5 we selected value 001, that corresponds to the chase
mentioned above.
“PIXEL MATRIX DESIGNED BY G-LITES”
Then in channel 3 we have selected:
• Value 000-050: The fixture will show C
• Value 051: The fixture will start to show the chase at the minimum speed.
• Value 052: increase of speed
• ···
5
• Value 150: maximum speed.
• Value 151: The fixture will start to show the chase in rewind mode at the minimum
speed.
• Value 152 increase speed.
• ···
• Value 250: maximum speed in rewind mode.
• Value 251-255: STOP
NOTES:
1. We will provide all the chases.
2. The values of speed are for reference. Changes can be introduced by your
engineer.
3. The maximum speed must be determined by your engineer because the dimmers
need a reaction time.
PRODUCT SPECIFICATION
Size: 61 x 61 x 15 cm / 24 x 24 x 5.9 inches
Net Weight: 17.5 Kg. / 38.5 Lb.
Power input: AC380 - 440V, 50Hz~60Hz
Fuse: 20A
• This product has up to 29 channels.
• 5 X 5 lighting & controller equipment.
• With 255 scenes more, 146 built-in already.
• Two models: Stand alone mode and DMX model.
• It can adjust speed and brightness.
• 75W per lamp.
• With brackets, it´s easier for handling and using.
Design and product specifications are subject to change without prior notice.
6
Loading...