GLIDEAWAY Comfort Base Freestyle Owner's Manual

FREESTYLE
Owner’s Manual
1
Safety Information ...........................................................................2
What Is Included ...............................................................................5
Assembly - Base ...............................................................................6
Operation - Main ...........................................................................14
Troubleshooting .............................................................................16
Specifications..................................................................................17
Technical Assistance .....................................................................17
Service Requirements ..................................................................17
Warranty ..........................................................................................18
Registration .....................................................................................19
Contents
User Info
Please take a moment and write down the serial number in the space provided below, in case you need to refer to it in the future. This information can be found by raising the head section of the bed.
SKU: CB00
Serial Number ________________________________________________________
This number will be required for future service claims.
2
SAFETY INFORMATION
ATTENTION!
IMPORTANT SAFETY INSTRUCTIONS. SAVE THIS MANUAL!
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING
THIS PRODUCT. PROPER OPERATION OF YOUR ADJUSTABLE BED IS
NECESSARY TO ENSURE THE LONG LIFE AND DURABILITY YOU
EXPECT FROM A HIGH-QUALITY PRODUCT. THE MANUFACTURER
HAS TESTED AND INSPECTED THIS PRODUCT PRIOR TO SHIPMENT.
ELECTRICAL SAFETY
Always unplug this adjustable bed from the electrical outlet before any cleaning or maintenance of the adjustable bed. To safely disconnect, remove the plug from the outlet. Keep cord away from heated surfaces. Use only indoors.
Discontinue use of this adjustable bed and contact the manufacturer for repair if: (1) it has a damaged cord or plug, (2) it is not working properly, or (3) it has been dropped or damaged.
FOR OPTIMAL SAFETY, YOUR ADJUSTABLE BED SHOULD BE PLUGGED INTO A SURGE PROTECTOR (not supplied with this adjustable bed).
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the 6LR61 9V batteries.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s directions.)
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO MOISTURE.
RADIO FREQUENCY IS 2.4 GHZ.
FCC compliance device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation of the device.
Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void the user’s right to operate the device. The input voltage is AC100-240 50/60HZ; the output voltage is DC29V 1.8A (Twin, Twin XL, Split Cal King, Full) or DC29V 3A (Queen).
3
SAFETY INFORMATION
WARRANTY WARNING!
This bed is specifically designed to require no maintenance by you, the user. Any opening or tampering with the control box, motors or hand controls (with the exception of the battery compartment, if equipped) will void the warranty. Do not attempt to alter component wiring or adjust or modify the structure of the product in any way or the warranty will be void. Only those authorized may conduct repairs or part replacement on your adjustable bed.
IN-HOME USE ONLY
This adjustable bed is designed exclusively for in-home use.
HOSPITAL/MEDICAL DISCLAIMER: This base is NOT designed for hospital or medical use (In-Home or Commercial) and is NOT designed to meet medical or hospital standards. Do not use this base with TENT TYPE oxygen therapy equipment or use near explosive gases.
PRODUCT RATINGS
Lift Motor Restrictions: The lift motors in this bed are NOT designed to operate
continuously for more than one (1) minute over an eight (8) minute time period, or approximately 12% duty cycle. To ensure reliable functionality and full life of this product, do not attempt to exceed these limits.
NOTE: Attempting to circumvent or exceed this rating will shorten the product life expectancy or cause damage to the product and may void the warranty.
Weight Restrictions: The recommended weight limits on our adjustable beds are: Queen: 650 lb Full: 500 lb Twin, Twin XL, Split Cal King: 400 lb (800lb if using two Twin XL/Split Cal Kings for one King/Cal King base)
The structure of the bed will support the recommended weight when distributed evenly across the bed.
The head and foot sections are not designed to individually support or lift this amount of weight.
For optimal performance and integrity of structure, entering and exiting the adjustable bed with the bed in the flat position is recommended.
NOTES:
Exceeding the recommended weight restrictions could damage your adjustable bed
and void your warranty.
Due to flexibility in Box Spring mattress supports, TXL and SCK models are not
intended to be connected together for use on Box Spring mattress supports.
4
SAFETY INFORMATION
SMALL CHILDREN AND PETS WARNING
Immediately dispose of all packing materials as they can pose a smothering risk to small children and pets. Injury could also occur if children or pets are permitted to play on or under the bed. Do not allow children to operate this bed without adult supervision.
LUBRICATION AND CLEANING
This product is designed to be maintenance-free. The lift motors are permanently lubricated and sealed — no additional lubrication is required. Do not apply lubricant to lift motor or base components (nuts, bolts, etc.).
LIFT WARNING
DO NOT SIT ON THE HEAD OR FOOT SECTIONS WHILE IN THE RAISED POSITION, OR DURING LIFT OR LOWERING CYCLES.
MOVING AFTER INSTALLATION
Do not place adjustable bed base vertically on its head or foot sections. This may cause injury to persons or damage to base.
WARNING!
To reduce the risk of burns, fire, electric shock, or injury to persons:
• Unplug from outlet before putting on or taking off accessories.
• Close supervision is necessary when this base is used by, or near children, invalids,
disabled persons, or pets.
• Use this base only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
• Never operate this base if it has a damaged cord or plug, is not working properly, has
been dropped or damaged, or dropped in water.
• Keep the cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
• To disconnect, remove plug from outlet.
• DO NOT USE NEAR PEOPLE USING OR WEARING MEDICAL DEVICES. FOR
HOUSEHOLD/RESIDENTIAL USE ONLY.
• Do not exceed recommended duty cycle, reference page 3.
5
WHAT IS INCLUDED
Before discarding any packing materials, check the adjustable base shipping carton and verify the following items are included:
(2) Base Pieces
(2) Connecting Rods
(8) Hex Bolts (Pre-installed on Connecting Rods) (1) Allen Key
(1) Connector Plate with Wing Nuts (Twin XL/Split Cal King Only)
(2) Foot Mattress Retainers with (8) bolts and (1) Allen Key
(4) Brackets with Wing Nuts
(1) Bolt and Retainer Pin
(1) Remote Control
(1) AC Cord
(1) Power Supply
(1) DC Power Cord
(1) Sync Cable (For TXL/Split Cal King size only)
Also included: (2) 9V Batteries , (1) Owner’s Manual, (3) AAA Batteries
x4
x8
x8
6
ASSEMBLY - BASE
It is HIGHLY recommended to use two people for the installation of this product. To assemble, please perform the following steps:
1
Carefully lift both Base Pieces and remove
the plastic wrapping from the bottom to access the bases. Remove the cable ties holding both Base Pieces together. Lay the two Base Pieces down and unpack the remaining items.
2
Remove the bolts from the Connecting
Rods and set aside. Insert the Connecting Rods into one side of each Base Piece and install two bolts into each of the Connecting Rods.
3
Slide the other Base Piece over exposed
Connecting Rods. Install remaining bolts. Be sure to hand tighten each and then tighten 1/4 turn more, as over-tightening could cause damage to the frame or Connecting Rod.
TWIN XL/KING INSTALLATION:
See pages 7 and 8.
QUEEN INSTALLATION:
See pages 9 and 10.
Loading...
+ 14 hidden pages