GLG Pastello Minibeam MKII User Manual

GLG LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

1

USER

M

ANUA

L

Pastello Minibeam MKII

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

2

CON

TE

NTS

1. General information 2

2.

Safety

instructions 3

3. Trait

and skill specifications 4

4. Operation

panel 6

5.

Dimensional

drawings 6

6. Photometric

data 7

7.

Mounting and

Installation 7

8. Power supply and Signal connection 9

9.

Display menu

11

10.

DMX

traits

18

11. Circuit

connecting

diagram

22

12. Trouble

dispose

23

13.

Cleaning and

Maintenance

24

14.

Duty exonerat

ive and

Copyright protection

24

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

3

1

. GENERAL

IN

FOR

MAT

IO

N

INTRODUCTION: Congratulations, you have just purchased one of the
most innovative and reliable LED fixtures on the market today. Our
company has been designed to perform reliably for years when the
guidelines in this booklet are followed. Please read and understand the
instructions in this manual carefully and thoroughly before attempting to
operate this unit. These instructions contain important information
regarding safety during use and maintenance.

Notice: As part of our ongoing commitment to continuous products

update, company will keep the right to improve this
products, the information in this menu may be changed in
the future, the company reserve the right to change the
data without any advises.

UNPACKING: Thank you for purchasing our company products. Every
product has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage that
may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your fixture for damage and be sure all accessories
necessary to operate the fixture have arrived intact. In the event damage
has been found or parts are missing, please contact our customer support
team for further instructions. Inside the box you should find: the fixture,
a DMX XLR cable, a power cable, and this user manual.

Please do not discard the shipping carton in the trash. Please recycle
whenever possible.

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

4

2

. SAFETY

INSTRUCT

IO

NS

Notice:

To guarantee proper and consistent operation, it is
important to follow the guidelines in this manual. Our
company will not accept responsibility for damages
resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.

●1. In order to ensure the light could operate normally, the ambient
temperature couldn't be higher than 38℃ and no lower than- 2℃.

●2. Under normal condition, the highest sectional surface temperature

may be up to 60 ℃.

● 3.These projectors are designed depends on the electric shock

protection, the projector should be connected with the power supply
system which connected ground enough. The projector's ground
cable should be connected with the ground cable of the power
supply system as well. The ground mark of the light metal cover
should be connecting with the installation bricked steadily.

●4. Don't use the power cable when the insulation is damaged.

It must be the manufacturer or distributor or the professional person
to change the damaged power cable in order to avoid any
dangerous.

●5.Please check the voltage, frequency data of power supply system is

suitable for the mentioned on the projector. Please do avoid the
different voltage between them and burn the projector.

●6.Do not attempt to operate this fixture if the power cord has become

damaged or frayed.

●7.Never open this fixture while in use.

●8.Never look directly into the light source. You risk injury to your

retina, which may induce blindness.

●9.Please be aware that damages caused by modifications to the device

are not subject to warranty.

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

5

3. PERFORMANCE

TRAIT AND SKILL S

PECIFICATIO

NS

◎ Voltage：AC100~240V 50/60Hz.
◎ Power：118W.

◎ LED chip：10W，RGBW 4 in 1 LED chip.

◎ LED QTY：7PCS.

◎ LED life：50000H.

◎ Lens degree：standard 8°.

◎ Beam angle:12°.

◎ Color: RGBW macro color system.

◎ Strobe:1-30 times/ second electronic strobe and random strobe.

◎ Dimmer ：65536 class dimmer.

◎ Pan/Tilt ： Pan ：540° times /1.5 seconds Tilt：180°/0.5 seconds.

◎ Control Mode: DMX512, RDM, Stand-alone mode ,Voice Control

mode , Mater-Slave mode , Wireless DMX512.

◎ Channel: Standard Channel : 9 , Extend Channel : 15.
◎ Display Menu:

1. 2.4 inches TFT touch screen, Chinese and English two version
language.
2, Display board can record device’s using time , show device’s
temperature, channel data and software version .
3, Edit the procedure

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

6

◎ Other feature :

1.Extend IP address function , each IP address maximum can set 64
ID

2.Support DMX signal priority identification, when lose the signal

it would be turn into Black , default scene , Automatic function

etc according to your set.

3.Remote control function: control the procedure, speed etc function

by the remote controller when the product under the condition

without signal.

4.software upgrade : upgrade software by XRL cable.

◎ Outlooking: adopt ABS anti-fire plastic.

◎ Carton size : 270×260×350MM.
◎ N.W.: 3.8KG G.W.: 5.7KG

◎ Light size:226×268MM

GLG LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

7

4. OPERATION

P

AN

EL

5. DIMENSIONAL D

RAWIN

GS

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

8

6. PHOTOMETRIC DATA

7

. MOUNTING AND INSTA

LLATION

Cautions:

For added protection mount the fixtures in areas outside walking
paths, seating areas, and away from areas were unauthorized personnel
might reach the fixture. Before mounting the fixture to any surface, make
sure that the installation area can hold a minimum point load of 10 times
the device's weight. Fixture installation must always be secured with a
secondary safety attachment, such as an appropriate safety cable. To
avoid injury, never stand directly below the device when mounting,
removing, or servicing the fixture.
Mounting points:

Overhead mounting requires extensive experience, including
amongst others calculating working load limits, a fine knowledge of the
installation material being used, and periodic safety inspection of all
installation material and the fixture. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in
bodily injury. Be sure to complete all rigging and installation procedures
before connecting the main power cord to the appropriate wall outlet.

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

9

Mountin

g

Our company is fully operational in any mounting position, hanging
upside-down, side mounted, or set on a flat level surface, etc. Be sure this
fixture is kept at least 0.5m (about 1.6feet) away from any flammable
materials (decoration etc.).

When clamp mounting; always use and install the supplied safety
cable as an added safety measure to prevent accidental damage in the event
of a clamp failure. See the image below.

GLG LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

10

8

. POWER SUPPLY AND SIGNAL

CONN

ECTIO

N

1. Power s

upp

ly

Use the professional plug to connect the projector and main power
supply. Please pay attention to the voltage, frequency the same as the
mentioned on the projector. Suggest each light has separately switched of
the power supply so that could turn on or turn o each projector
desultorily.

2. Signal c

onnection

Please use the round 3/5-pin XLR plugs &sockets oered

by menu
facture to connect the rst projector's output to the second projector'
input and connect the second projector's output to the third device's input.
And in the same way for the rest, eventually connect the last device's
output, all the devices are together as the following gure.

The devices’ control signal output or input by using the 3/5-pin XLR pug
and socket. If need to long then the communication cable, p

lease make
sure the both side of 3/5-pin plug is one to one. (one to one, two to two,
three to three). Otherwise, the communication cable will be interrupted.

The communicate cable is 2-pin shielded cable 75
Resistance with each core is at least a 0.5mm diameter. (Caution: All the
inside leading wire of 3/5-pin XLR plug couldn't touch each other or
plinth).
Recommend to use the DMX signal terminator for the installation to
avoid the electronic noise damage the digital control signal. Simply

GLG LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

11

speaking, DMX terminator is an XLR connector with a 120 1/2w resistor
connected across pin 2 and 3.Which is then plugged into the output
socket on the last projector in the chain. Refer to the connection as
above:(Picture ).We suggest using the DMX signal distributor when the
distance of the lights over 15meter,In case of eect the light
communication because of the signal feeble.

3. Light power connection:

After doing the above operation and making sure all the devices had been
installed with natural operate, press the power switch to check whether
everything is working normally.

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

12

9

. DISPLAY

M

EN

U

Ⅰ

Menu

Ⅱ

Menu

Ⅲ

Menu

R

emark

SETTING

DMX Ad

dress

001-512

Fixture ID

000-064

Channel mode

S

tandard（9CH

） D

efault

E

xtended（

15CH

）

DMX

input

mode

Wired

input

D

efault

Wireless

input

Reset wireless

DMX

function

Hold
Black
D.scene

Program

1

Program

2

Program

3

Program

4

Program

5

Program

6

Program

7

Program

8

Slave-Master

Slave

mode

Master mode

Music

control

Close

Open

Exit

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

12

Ⅰ

Menu

Ⅱ

Menu

Ⅲ

Menu

R

emark

INFO

Fixture times

Power

on time

****H

Lamp

on time

****H

Fixture

t

emperatures

LAMP_TEM

***℃

RDM

UID

3888:********

DMX live

1.

Dimmer 0-

255

2.

Dimmer

fine 0-

255

3. Shutter 0-

255

4.

Red 0-

255

5. Green 0-

255

6. Blue 0-

255

7. White 0-

255

8.

Macro

colour 0-

255

9. Pan 0-

255

10. Pan fine 0-

255

11. Tilt 0-

255

12. Tilt fine 0-

255

13. Fixture control 0-

255

14. Calibration 0-

255

15. Slave ID 0-

255

Version info

LED_XY_SOFT:V*.**
LED_DPY_SO F T:V*.**

Exit

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

13

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

14

Ⅰ

Menu

Ⅱ

Menu

Ⅲ

Menu

Ⅳ

Menu

Remark

PERSON

Pan/Tilt

PT swap

OFF Default
ON

Pan invert

OFF Default
ON

Tilt invert

OFF Default
ON

Exit

DMX reset

ON

Default

OFF

Reset

System reset

Exit

Quick

closedown

Open

Close

P/T angle
limit

Close

Open

Program
on/off

Close

Open

Set p/t
angle

Pan start

Pan end

Tilt start

Tilt end

Exit

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

15

Ⅰ

Menu

Ⅱ

Menu

Ⅲ

Menu

Ⅳ

Menu

R

emark

PERSON

Display

Display

language

English(英文

) D

efault

C

hinese（中文

)

Display sleep

Light always

2 minutes

D

efault

4 minutes

6 minutes

Display

intensity

10-100

D

efault

:50

Display

rotation

Normal

D

efault

Rotate 180

TFT calibration

Exit

Exit

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

16

Ⅰ

Menu

Ⅱ

Menu

Ⅲ

Menu

R

emark

MANUAL

1.

Dimmer

0-255

2.

Dimmer fin

0-255

3.

Shutter

0-255

4.

Red

0-255

5.

Green

0-255

6.

Blue

0-255

7.

White

0-255

8.

Macro colo

0-255

9.

Pan

0-255

10.

Pan fine

0-255

11.

Tilt

0-255

12.

Tilt fine

0-255

13.

Fixture c

0-255

14.

Calibrati

0-255

15.

Slave ID 0-255

Exit

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

17

Ⅰ

Menu

Ⅱ

Menu

Ⅲ

Menu

Ⅳ

Menu

PROGRAM

Edit

program

Edit

program

1

Scene 0-

100

1.

Dimmer

0-255

2.

Dimmer fin

0-255

3.

Shutter

0-255

4.

Red

0-255

5.

Green

0-255

6.

Blue

0-255

7.

White

0-255

8.

Macro colo

0-255

9.

Pan

0-255

10.

Pan fine

0-255

11.

Tilt

0-255

12.

Tilt fine

0-255

13.

Fixture c

0-255

14.

Calibrati

0-255

15.

Slave ID 0-255

Save scene

Exit

Edit

program

2

Same as Edit program1

Edit

program

3

Same as Edit program1

Edit

program

4

Same as Edit program1

Edit

program

5

Same as Edit program1

Edit

program

6

Same as Edit program1

Edit

program

7

Same as Edit program1

Edit

program

8

Same as Edit program1

Exit

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

18

Ⅰ

Menu

Ⅱ

Menu

Ⅲ

Menu

Ⅳ

Menu

PROGRAM

Set program

Set program 1

Start step 0-100
End step 0-100
Step time 0-255
Save
Exit

Set program 2 Same as Set program 1

Set program 3 Same as Set program 1

Set program 4 Same as Set program 1

Set program 5 Same as Set program 1

Set program 6 Same as Set program 1

Set program 7 Same as Set program 1

Set program 8 Same as Set program 1

Exit

Run Running program…

Fixed scene

Scene

001-100

Exit

SERVICE

Error list

Adjust

Pan

±5.00%

Tilt

±5.00%

Exit

Factory

Factory default ****
Adjust default ****
Time clean ****
Developer ****
Machine sel. ****
Exit

Updata

****

Exit

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

19

10

、

DMX TRAIT

S

Channel

DMX

values

%

Effect

1.

Dimmer

0-255 0-100

2.

Dimmer fine

0-255 0-100

3.

Shutter

0-9 0-3 Unused range

10-49 4-19

Light→dark，slow→fast

50-89 20-34

Dark→light，slow→fast

90-119 35-46

Dark→light→dark，slow→fast

120-179 47-70 Random fast→slow strobe

180-249 71-98 In-phase, slow→fast

250-255 99-100 Unused range

4. Red 0-255 0-100

5. Green 0-255 0-100

6. Blue 0-255 0-100

7. White 0-255 0-100

8.

Macro
colour

0-1 0-1 Unused range

2-254 1-99 Shadow

255 100 Unused range

9.

Pan

0-255 0-100

10.

Pan fine

0-255 0-100

11.

Tilt

0-255 0-100

12.

Tilt fine

0-255 0-100

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

20

Channel

DMX

values

%

Effect

13.

Fixture

control

0-9 0-3 Unused range

10-14 4-5 Complete reset

15-19 5-7 Open

20-24 7-9 Close

25-29 10-11 Quick open

30-34 12-13 Quick close

35-239 14-93 Unused range

240-244 94-95

Pan

245-249 96-97

Tilt

250-255 98-100 Unused range

14.

Calibration

0-255 0-100

15.

Slave ID

0-2

0

All IDs are efficient lighting its own

ID to 0, the channel set to any value

is valid

3-5 1-2 ID:1 effective

6-8 2-3 ID:2 effective

... ...

192-194 75-76 ID:64 effective

195-197

76-77

ID is(2*n)+1 effective,(n=0-31)

1、3、5、7、9…63

198-200

77-78

ID is(2*n)+2 effective,(n=0-31)

2、4、6、8、10…64

201-203

78-79

ID is(3*n)+1 effective,(n=0-21)

1、4、7、10、13…64

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

21

Channel

DMX

values

%

Effect

15.

Slave ID

204-206

80-81

ID is(3*n)+2 effective,(n=0-20)

2、5、8、11、14…62

207-209

81-82

ID is(3*n)+3 effective,(n=0-20)

3、6、9、12、15…63

210-212

82-83

ID is(4*n)+1 effective,(n=0-15)

1、5、9、13、17…61

213-215

83-84

ID is(4*n)+2 effective,(n=0-15)

2、6、10、14、18…62

216-218

84-85

ID is(4*n)+3 effective,(n=0-15)

3、7、11、15、19…63

219-221

85-86

ID is(4*n)+4 effective,(n=0-15)

4、8、12、16、20…64

222-224

87-88

ID is(5*n)+1 effective,(n=0-12)

1、6、11、16、21…61

225-227

88-89

ID is(5*n)+2 effective,(n=0-12)

2、7、12、17、22…62

228-230

89-90

ID is(5*n)+3 effective,(n=0-12)

3、8、13、18、23…63

231-233

90-91

ID is(5*n)+4 effective,(n=0-12)

4、9、14、19、24…64

234-236

91-92

ID is(5*n)+5 effective,(n=0-11)

5、10、15、20、25…60

237-239

93-94

ID is(6*n)+1 effective,(n=0-10)

1、7、13、19、25…61

GLG

LIGHTING EQUIPMENT

www.goedlichtengeluid.nl

[e-mail]

22

Channel

DMX

values

%

Effect

15.

Slave ID

240-242

94-95

ID is(6*n)+2 effective,(n=0-10)

2、8、14、20、26…62

243-245

95-96

ID is(6*n)+3 effective,(n=0-10)

3、9、15、21、27…63

246-248

96-97

ID is(6*n)+4 effective,(n=0-10)

4、10、16、22、28…64

249-251

97-98

ID is(6*n)+5 effective,(n=0-9)

5、11、17、23、29…59

252-254

98-99

ID is(6*n)+6 effective,(n=0-9)

6、12、18、24、30…60

255

100

All IDs are valid

Standard（9CH）

1.Dimmer 4.Green 7.Pan

2.Shutter 5.Blue 8.Tilt

3.Red 6.White 9.Fixture control

Extended（15

CH

）

1.Dimmer 6. Blue 11.Tilt

2.

Dimmer fine

7.White 12.Tilt fine

3.Shutter

8.Macro colour

13.Fixture control

4.Red 9. Pan 14.Calibration

5.Green 10.Pan fine 15.Slave ID

GLG

LIGHTING EQUIPMENT

www.goedlichtengluid.nl

[e-mail]

22

11.

CIRCUIT CONNECTING DIA

GRAM

GLG

LIGHTING EQUIPMENT

www.goedlichtengluid.nl

[e-mail]

23

12

. TROUBLE DISPO

SE

It is recommended some solution for some normal trouble shooting.
Any inextricability problems should always be handling by the
professional person. Disconnect the power supply before maintenance
the light.

●LED off：

1. Please check if install the suitable voltage

2. Please check whether the led will reach the end of their life can
explode; please replace a same description led.

3. Please check if the power supply is enough.

4. Please check whether the DMX 512 controller pass the "turn on"
order.

●Though the light is lighting, but it couldn't accept the control order:

1. Please check the start code address and the function option are

correct.

2. Please check whether the communicate control cable is on good
connection or the cable is too long or interrupt.

3. Please check the control system is not valid, check the signal
amplifier of chain connected is valid.

4. Please check whether the communicate cable is too long or the
other equipment is mutually conjugate.

5. Please arrange the wire well, shorter the signal cable, put the high
voltage cable and low voltage cable separately.

6. Add the signal amplify isolator.

7. Signal cable is used the excellent screening doublet (Resistance 75
OHM）

8. The end of the light end and the end resistance.

●The light can't move:

1. Please check if the power supply is suitable for the light voltage

data.

2. Please check the fuse of input voltage is defective.

3. Please check the light if they are deformation, inside parts is
broken, become wet etc will lead the loose contact.

GLG

LIGHTING EQUIPMENT

www.goedlichtengluid.nl

[e-mail]

24

13

. CLEANING AND MAIN

TE

NANCE

■1. In order to ensure the projector could work normally. It should be

kept clean always .The lens should also be regularly cleaned to
maintain an optimum light output. Do not use any type of solvent on
lens. It will damage the projector.

■2. Suggestion: The continue usage of the light don't exceed 4 hours. Or

it will shorter the usage of the lamp. Please use the alternative
operation to solve this problem.

■3. Please disconnect the power supply when begin to maintenance take

down the light. Please let the parts cool down 10 minute at least
then begin to install.

■4. Please inspect the lens or other moving parts timing and keep them

clear and static. If find anything damaged or looseness must change
a lamp or fix the lamp in order to avoid the accident.

14.DUTY EXONERATIVE

AND

COPYRIGHT PRO

TECT

ION

◎

Any products broken that didn't according to the instruction is not
guarantee to keep it in good repair.

◎

The commentary for all the instruction belongs to the supplier in final.

◎

No authorize can't copy.