1 X 7 5 W L E D S p o t + 9 X 1 2 W W a s h
USER MANUAL
KEEP THIS MANUAL FOR FUTURE NEEDS
MADspot ECO 75
GLG is a brand name of GOED licht en geluid the Netherlands
Thank you for your patronage. We are confident that our excellent
products and service can satisfy you. For your own safety, please read
this user manual carefully before installing the device.
In order to install, operate, and maintain the lighting safety correctly. We
suggest that the installation and operation should be done by the
verified technician and follow the instruction strictly.
A CAUTION! Keep this device away from
rain and moisture!
CAUTION!
Unplug mains lead before opening the housing.
Every person involved with the installation, operation and maintenance
of this device has to:
-be qualified
-follow carefully the instructions of this manual
1. INTRODUCTION
Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the carton box you should find:
1. One XLR power cable
2. One user manual
3. One pcs omega
Please check carefully that there is no damage caused by transportation.
Should there be any, please consult your dealer and don’t install this
device.
2 Mounting and installation
2.1 Cautions: for added protection mount the fixtures in areas outside
walking paths ,seating areas,or in areas were the fixture might be
reached by unauthorized personnel.
Before mounting the fixture to any surface ,make sure that the
installation area can hold a minimum point load of 10 times the device’s
weight.
Fixture installation must always be secured with a secondary safety
attachment ,such as an appropriate safety cable.
Never stand directly below the device when mounting ,removing ,or
servicing the fixture, from a ceiling,or set on a flat level surface (see
illustration below).Be sure this fixture is kept at least 0.5m (1.5ft) away
from any flammable (decoration etc.)
Always use and install the supplied safety cable as a safe cable as safety
measure to prevent accidental damage and /or injury in the event the
clamp fails.
2.2 Mounting points:
Overhead mounting requires extensive experience , including among
others calculating working load limits, a fine knowledge of the
installation material being used ,and periodic safety inspection of all
installation material and the fixture. If you lack these qualifications ,
Do not attempt the installation yourself ,improper installation can result
in bodily injury.
Be sure to complete all rigging and installation procedures before
connecting the main power cord to the appropriate wall outlet.
2.3 Clamp mounting :
The LED moving head provides a unique mounting bracket assembly that
integrates the bottom of the base, the included ‘omega bracket’ and the
safety cable rigging point in one unit (see the illustration below).When
mounting this fixture to truss be sure to sere to secure an appropritely
rated clamp to the included omega bracket using a M10 screw fitted
through the center hole of the ‘omega bracket’.As an added safety
measure be sure to attached at least one properly rated safety cable to
the fixture using on of the safety cable rigging point integrated in the
base assembly.
2.4 DMX-512 control connection
Connect the provided XLR cable to the female 3-pin XLR output of your
controller and the other side to the male 3-pin XLR input of the moving
head. You can chain multiple Moving head together through serial
linking. The cable needed should be two core, screened cable with XLR
input and output connectors. Please refer to the diagram below.
2.4 DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in
an electrically noisy environment, such as in a discotheque, it is
recommended to use a DMX terminator. This helps in preventing
corruption of the digital control signal by electrical noise. The DMX
terminator is simply an XLR plug with a 120 resistor connected between
pins 2 and 3,which is then plugged into the output XLR socket of the last
fixture in the chain. Please see illustrations below.
3 TECHNICAL PARAMETERS
POWER SUPPLIE
Input power:AC100-240V 50/60 Hz
Power consumption :200W
LED Source: 75W white + 9*12W RGBWA+UV 6in1 LEDs
Beam angle: 11°(spot)/25°(Wash)
Lamp life : 5000 hours lamp lifespan and low consumption
16/23 DMX channels
Color wheel: 7 colors+white
Gobo wheel: 7 gobos+open
Prism: 3 face
Focus: Electronic linear focus
Movement :pan 540 degree , tilt 270 degree
Control mode:DMX, Auto, Sound, Master/Slave
Display:LCD display
Dimension: 240*230*405 mm
Weight: 8.5 kg
4 :MENU FUNCTION
DMX Address
001~512
Operating Mode
DMX 16 Ch
DMX 23 Ch
Auto
Perform Mode 1
Perform Mode 2
Perform Mode 3
Perform Mode 4
Perform Mode 5
Perform Mode 6
Perform Mode 7
Perform Mode 8
Sound
Master Auto
Perform Mode 1
Perform Mode 2
Perform Mode 3
Perform Mode 4
Perform Mode 5
Perform Mode 6
Perform Mode 7
Perform Mode 8
Master Sound
Slave
Language Setting
简体中文
English
Advanced Setting
Pan Reverse
Tilt Reverse
Display Reverse
Mic Sensitive
= 000
Reset Motor
Factory Reset
Home Position
Password
Code =018
PAN
PAN =000
TILT
TILT =000
Color
Wheel Gobo
Focus
Prism
System Info
Current Time
Total Time
Current Mode
Temperature
Software Version
Manual Control
PAN
PAN =000
PAN-FINE
PAN-Fine =000
TILT
TILT =000
TILT-FINE
TILT-Fine =000
Pan/Tilt Speed
Move Speed =000
Dimmer
Dimmer =000
Strobe
Strobe =000
Color
Wheel Gobo
Wheel Gobo
Rotation
Focus
Prism
5:Function Mode
5.1 DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
Select via the encoder.
Press the encoder, adjust the DMX address by turning the encoder.
Press the encoder to confirm.
Press the Mode/Esc-button in order return to the main menu.
Set DMX address
Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display
automatically
shows the channel with a value changing.
5.2 Run Mode
The LED moving head have 16CH and 23 CH, can receive the International DMX
signal.
In the【Run】mode，you can chose【Master】mode [ Sound Control ]
[Master Auto Run ] [Master Sound Control ] and【Slave】mode.
5.3 Language Setting
With this function, you can choose the Language between English and Chinese.
5.4 Advanced Set up
Pan Reverse
With this function you can reverse the Pan-movement.
Tilt Reverse
With this function you can reverse the Tilt 1-movement.
Display Reverse
With this function you can reverse the Tilt 2-movement.
Reset
With this function, you can reset the device via the Control Board.You can select the
different reset function by turning the encoder.
Factory Reset
With this function, you can select restore factory set for ON or OFF, the default is
OFF.
5.5System State
With this function, you can know the On Time ,Accumulative Time,
Current Run Mode ,Temperature and Software Version.
5.6 Manual Control
With this function ,you can adjust the pan and tilt and the move speed, also adjust
the dimmer ,strobe and color.
6: DMX CHANNELS
6.1 16 channel definition table
Channel
DMX Value
Function
1
000 - 255
X
2
000 - 255
Y
3
000-255
Dimmer(0-100%)
4
000-004
Shutter closed
005-250
Strobe effect slow to fast
251-255
Shutter open
5
000-004
Open(White)
005-013
White/Color1
014-022
Color1
023-031
Color1/Color2
032-040
Color2
041-049
Color2/Color3
050-058
Color3
059-067
Color3/Color4
068-076
Color4
077-085
Color4/Color5
086-094
Color5
095-103
Color5/Color6
104-112
Color6
113-121
Color6/Color7
122-130
Color7
131-139
Open(White)
140-195
Forward rainbow effect from fast to slow
196-199
Rotation stop
200-255
Backward rainbow effect from slow to fast
6
000-007
Open(White)
008-028
Gobo1
029-049
Gobo2
050-070
Gobo3
071-091
Gobo4
092-112
Gobo5
113-133
Gobo6
134-194
Forward rainbow effect from fast to slow
195-255
Backward rainbow effect from slow to fast
7
000-009
Stop
010-129
Forward Gobo Rotation from fast to slow
130-134
Stop
135-255
Backward Gobo Rotation from slow to fast
8
000-255
Focus
9
000-007
Open(White)
008-134
Prism
135-255
Forward Prism Rotation from slow to fast
10
000-004
Wash Shutter closed
005-250
Wash Strobe effect slow to fast
251-255
Wash Shutter open
11
000-255
Red
12
000-255
Green
13
000-255
Blue
14
000-255
White
15
000-255
Amber
16
000-255
Purple
6.2
23 channel definition table
Channel
DMX Value
Function
1
000 - 255
X
2
000-255
X-Fine
3
000 - 255
Y
4
000-255
Y-Fine
5
000 - 255
XY SPEED
6
000-255
Dimmer(0-100%)
7
000-004
Shutter closed
005-250
Strobe effect slow to fast
251-255
Shutter open
8
000-004
Open(White)
005-013
White/Color1
014-022
Color1
023-031
Color1/Color2
032-040
Color2
041-049
Color2/Color3
050-058
Color3
059-067
Color3/Color4
068-076
Color4
077-085
Color4/Color5
086-094
Color5
095-103
Color5/Color6
104-112
Color6
113-121
Color6/Color7
122-130
Color7
131-139
Open(White)
140-195
Forward rainbow effect from fast to slow
196-199
Rotation stop
200-255
Backward rainbow effect from slow to fast
9
000-007
Open(White)
008-028
Gobo1
029-049
Gobo2
050-070
Gobo3
071-091
Gobo4
092-112
Gobo5
113-133
Gobo6
134-194
Forward rainbow effect from fast to slow
195-255
Backward rainbow effect from slow to fast
10
000-009
Stop
010-129
Forward Gobo Rotation from fast to slow
130-134
Stop
135-255
Backward Gobo Rotation from slow to fast
11
000-255
Focus
12
000-007
Open(White)
008-134
Prism
135-255
Forward Prism Rotation from slow to fast
13
000-255
Wash Dimmer(0-100%)
14
000-004
Wash Shutter closed
005-250
Wash Strobe effect slow to fast
251-255
Wash Shutter open
15
000-255
Red
16
000-255
Green
17
000-255
Blue
18
000-255
White
19
000-255
Amber
20
000-255
Purple
21
000-007
Empty
008-047
Auto Play 1
048-087
Auto Play 2
088-127
Auto Play 3
128-167
Auto Play 4
168-207
Auto Play 5
208-247
Auto Play 6
248-255
Color Gobo Sound Control
22
000-007
Empty
008-032
X/Y auto run 1
033-058
X/Y auto run 2
059-084
X/Y auto run 3
085-110
X/Y auto run 4
111-136
X/Y auto run 5
137-162
X/Y auto run 6
163-188
X/Y auto run 7
189-214
X/Y auto run 8
215-240
X/Y auto run 9
241-255
X/Y Sound Control
23
250-255
RESET(10S)
Loading...