Glen Dimplex Home Appliances Ltd BE814 User Manual
BE814
Fully Integrated Freezer
INSTALLATION AND USER INSTRUCTIONS
You must read these instructions prior to using the
appliance and retain them for future reference.
Contents
Introduction & safety warnings...........................................................................2
Electrical requirements ......................................................................................3
Transportation instructions.................................................................................4
Installation instructions.......................................................................................5
Repositioning the door.......................................................................................6
Starting...............................................................................................................8
Temperature control and adjustment .................................................................9
Storing frozen food.............................................................................................9
Freezing fresh food..........................................................................................10
Defrosting.........................................................................................................11
Cleaning and care............................................................................................12
Do's and don'ts ................................................................................................13
Problem solving ...............................................................................................13
Installation instructions - detailed step by step ................................................14
Guarantee details.............................................................................................20
How to obtain service.......................................................................................21
Technical data..................................................................................................22
Wiring diagram.................................................................................................23
Customer Care..................................................................................back cover
Please keep this handbook for future reference, or for
anyone else who may use the appliance.
1
Congratulations on your choice of a Belling quality Appliance which has been
designed to give you service for many years.
WARNING !
IMPORTANT !
DO NOT connect your appliance to the electricity supply until all packing and
transit protectors have been removed.
• Leave to stand for at least 4 hours before switching on to allow compressor
oil to settle if transported horizontally.
• If you are discarding an old refrigerator with a lock or latch fitted to the door,
disable the lock/latch, ensure that it is left in a safe condition to prevent the
entrapment of young children.
• This freezer must only be used for its intended purpose i.e the storing and
freezing of edible foodstuff.
• Do not dispose of the appliance on a fire. At Belling, the care and protection
of our environment is an ongoing commitment. This appliance which is among
the latest range introduced is particularly environment friendly. Your appliance
contains non CFC / HFC natural substances in the cooling system (Called
R600a) and in the insulation (Called cyclopentane) which are potentially
flammable if exposed to fire. Therefore, take care not to damage, the cooling
circuit / pipes of the appliance in transportation and in use. In case of a damage
do not expose the appliance to fire, potential ignition source and immediately
ventilate the room where the appliance is situated.
• We suggest you contact your local authority for disposal information and
facilities available.
• You may install your freezer in an unheated cold room (E.g.: garage,
conservatory, annex) provided it is protected from rain, moisture, excessive
heat.
• To obtain the best possible performance and trouble free operation from your
appliance it is very important to carefully read these instructions.
• On delivery, check to make sure that the product is not damaged and that all
the parts and accessories are in perfect condition.
• Ensure that the plug remains readily accessible. Do not use a multiple adapter
bar or extension cable.
• Failure to observe these instructions may invalidate your right to free service
during the guarantee period.
WARNING- Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
WARNING- Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING- Do not damage the refrigerant circuit.
WARNING- Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by
the manufacturer.
• We suggest you keep these instructions in a safe place for easy reference.
2
ELECTRICAL REQUIREMENTS
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN
&
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm.
32mm.
12mm.
FUSE
CORD GRIP
Before you insert the plug into the wall socket make sure that the voltage and
the frequency shown in the rating plate inside the appliance corresponds to
your electricity supply . Rating label is on the left hand side of freezer inner liner.
We recommend that this appliance is connected to the mains supply via a
suitable switched and fused socket in a readily accessible position.
Should the mains lead of the appliance become damaged or should it need
replacing at any time, it must be replaced by a special purpose made mains
lead which can only be obtained from a Belling Authorised Service Agent.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted moulded plug is not suitable for your socket, then the plug should
be cut off and an appropriate plug fitted. Destroy the old plug which is cut off
as a plug with bared cord could cause a shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse
need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating
must be used. Do not forget to refit the fuse cover. In the event of losing the
fuse cover the plug must not be used until a replacement fuse cover has been
fitted. Colour of the replacement fuse cover must be the same colour as that
visible on the pin face of the plug. Fuse covers are available from any good
electrical store.
IMPORTANT! FITTING A DIFFERENT PLUG
As the colours of the wires in themains lead of this appliance may
not correspond with the
colouredmarkings identifying the
terminals in your plug proceed as
follows: (See diagram).
1. Connect the green-yellow or
green (Earth) wire to the terminal
in the plug marked 'E' or with the
symbol
yellow or green.
2. Connect the blue (Neutral) wire
to the terminal in the plug
marked 'N' or coloured black.
3. Connect the brown (Live) wire
to the terminal in the plug marked
'L' or coloured red. With alternative
plugs a 13 A fuse must be fitted
either in the plug or adaptor or in
the main fuse box.If in doubt contact a qualified electrician.
or coloured green and
3
TRANSPORTATION INSTRUCTIONS
1. The appliance should be transported only in a vertical upright position. The
packing as supplied must be intact during transportation.
2. If during the course of transport the appliance has to be transported
horizontally , it must only be laid on its left hand side when standing in the front
of the appliance. After bringing it to upright position,it must not be operated for
at least 4 hours to allow the system to settle.
3. Failure to comply with the above instructions could result in damage occuring
to the appliance. The manufacturer will not be held responsible if these
instructions are disregarded.
4. The appliance must be protected against rain, moisture and other atmospheric
influences.
5. When positioning your appliance take care not to damage your flooring,
pipes, wall coverings etc. Do not move the appliance by pulling by the door
or handle.
IMPORTANT : Care must be taken while cleaning / carrying the appliance to
avoid touching the bottom of the condenser metal support or pipework at the
back of the appliance as you might injure your fingers and hands or damage
your product.
IMPORTANT : This appliance is not designed for stacking with any other
appliance.
Do not attempt to sit or stand on top of your appliance as it is not designed for
such use. You could injure yourself or damage the appliance.
IMPORTANT : Make sure that mains cable is not caught under the appliance
during and after carrying / moving the appliance, to avoid the mains cable
becoming cut or damaged.
Do not allow children to play with the appliance or tamper with the controls.
Take care when installing your appliance and using it for the first time, during
normal daily use, while defrosting and cleaning the interior freezer compartments
not to damage cold panels and pipes and to avoid any injury. We recommend
the use of a pair of gloves when cleaning the cold panels as you might injure
your fingers and hands and/or damage the appliance beyond repair.
Belling declines to accept any liability should the instructions not be
followed.
4
IMPORTANT
INSTALLATION INSTRUCTIONS
1. To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.
2. Do not operate this appliance unless installed to furniture.
3. The appliance should be located on a smooth surface. The four front and
back feet can be adjusted as required. To ensure that, your appliance is standing
upright adjust the four front and back feet by turning clockwise or anti-clockwise,
until the product is in firm contact with the floor. Correct adjustment of feet
avoids excessive
vibration and noise.
4. Refer to "Cleaning and Care" section to prepare your appliance for use.
10 mm
To avoid any loss in performance, air suction channels should not be obstructed. (140 cm2)
Minimum distance between the wall and the appliance must be at least 10 mm.
40 mm 40 mm
10 mm
Wall
Appliance
5
REPOSITIONING THE DOOR
Follow the step by step instructions and the diagram below. Numbers in brackets
refer to diagrams.
1
3
4
8
1
2
2
5
8
6
7
7
6
1. Switch off at the socket outlet and pull out the mains plug.
2. Remove all food, loose items and fittings from inside the appliance and door
shelves.
3. Unscrew the bolts and remove the upper and bottom hinges from the cabinet and
door. (1) (2)
4. Remove stoppers. (3) (4)
5. Fit the stoppers on the opposite side. (5) (6)
6. Reposition the upper hinge on the opposite side as bottom hinge (7)
7. Reposition the bottom hinge on the opposite side as upper hinge. (8) Locate the
door and tighten the bolts fixing the door.
7
Loading...