Glen GL 4043, GL 4043 PLUS User Manual
MINI CHOPPER
GL 4043 / GL 4043 PLUS
US ER ’S G UI DE
PRODUCT NAME : MINI CHOPPER
SERIAL NO.: BILL NO. & DATE:
NAME OF OWNER: ADDRESS:
MODEL NO.: GL 4043 / GL 4043 PLUS
Glen Appliances Pvt. Ltd.
EPIP Phase II, Thana Baddi, Tehsil Nalagarh, Distt. Solan (H.P.)
Head Office : I-34, DLF Industrial Area Phase-I, Faridabad - 121 003
Helpline : 0129-2254191 Fax : 0129-2274344
E-mail : info@glenindia.com Website : www.glenindia.com
DEALER’S STAMP & SIGNATURE
*Subject to change without prior notice.
Voltage
Power
Rating
Material (Motor Unit)
(Bowl)
Speed Control
Motor Speed (RPM)
Weight
Carton Dimensions
(mm) (w x d x h)
Capacity Liquidiser Jar
:
:
:
:
:
:
:
:
:
:
230 V AC 50 Hz
250 W
1 Minute Maximum -
Continuous
A.B.S.
Poly Carbonate
PUSH START - SINGLE SPEED
3600 (approx) - No Load.
0.9 kgs approx
130 x 130 x 250 (GL 4043)
130 x 130 x 345 (GL 4043 PLUS)
400 ml. max. (Depends on Ingredients)
SPECIFICATIONS*
PACKING LIST
Main Unit, Bowl (1 nos.), Bowl Cover, SS Blade, Whisking Disc, User’s Guide.
Main Unit, Bowl (2 nos.), Bowl Cover, SS Blade, Whisking Disc, User’s Guide.
GL 4043 :
GL 4043 PLUS :
Identify Your Mini Chopper GL 4043 / GL 4043 Plus
WHISKING DISC
S.S. BLADE MOULDED
BOWL COVER
DRIVE SPINDLE
MOTOR UNIT
OPERATING KNOB
BOWL
Using Your Mini Chopper
Slide chopping blade inside the bowl on S.S. pin. Put ingredients to be processed in the bowl.
Place bowl cover on bowl, make sure it fits properly into slots of bowl. Place the Motor Unit
on the bowl cover.
Plug the unit & check by pressing the operating knob, that SS Blade/Whisker is properly
located into drive spindle. Mini Chopper is ready for use.
Press the operating knob in short intervals to see the consistency you need.
Do not run the unit for a long duration as the motor is designed for a maximum run of 60
seconds at one go. Most of the functions, like, making puree, chopping, ice cr ushing,
whisking, takes 15-30 sec. max.
Some foods like carrot may discolor the plastic. To remove this rub with a cloth dipped in
vegetable oil immediately after finishing your job.
The Motor Unit should be wiped with a wet soft cloth. Never immerse it in water.
Ensure that all the components are dry before storing.
Warranty
Warranty Is Not Valid If
This Glen Mini Chopper is fully warranted against any defect arising out of defective
materials or faulty workmanship for a period of one year from the date of purchase. Should
any defect develop in this product, the customer should bring the product to nearest
authorized service centre, where the company undertakes to get the product repaired free of
charge.
The use and care instructions have not been followed.
Defects are caused by accident, misuse, abuse or commercial use.
Plastic parts are not covered under this warranty.
The repair work is carried out by persons not authorised by the company.
Any modification or alteration of any nature is made in the product.
Normal wear & tear of the product is not covered under warranty
The bill/cash memo and copy of warranty card is not presented.
Under no circumstances, whether based on limited warranty or otherwise shall the company
be liable for incidental, special or consequential damages. Use of product indicates
acceptance by you of the aforesaid terms and conditions.
Loading...