Gleamous GL5 Instruction Manual

Instant Hot Water Heater

For proper operation and maintenance please

Read the instruction manual before installation.

www.gleamoushotwater.com.au

Instruction Manual

GL5

Instant Hot Water Heater

1

Thankyou for choosing the GL5-15 complete home instant hot water unit.

Your safety is very important!

This manual provides many important safety points. Please read carefully
and follow the instruction.

It is dangerous and may cause injury if you don't follow safety instructions.

This manual helps you to gain a better understanding of the installation,
operation, and maintenance of your electric water heater. It provides key
safety information.

Main Features

Adjustable water temperature settings from 30℃ to 50℃

This unit should only be installed by a fully qualified electrical contractor.

We urge you to read all of the instructions thoroughly before installation or
operation. We highly recommend keeping this manual for future reference.

The manufacturer will not be liable for any damages caused by failure to
follow installations instructions and operating procedures.

Retain your original receipt as the proof of purchase.

Memory function, automatically sets to the last selected temperature.
Safety precautions:

Clear LCD screen displays the actual outlet water temperature

New die-cast heating tank,

1.Protects against dry heating and overheating;

2.ELCB test device to prevent electric shocks.

3.Flow switch as safety device;

4.Automatic malfunction checking.

This heater is not intended to be operated by children, or mentally impaired
personnel, unless under adult supervision and guidance.

Children are not allowed to play with the water unit.

Consumers Responsibilities’

2

OUTLINE DRAWING OF GL5

POWER
INDICATOR

POWER
CORD

MODE
CHANGE KEY

DISPLAY SCREEN

TEMP. REGULATING
KEY+

TEMP.
REGULATING
KEY-

HOT WATER OUTLET PIPE

COLD WATER INLET PIPE

ON/OFF

Part Identifications

Installation Manual

Opening the Packing Materials

Attention: Do not remove any of the permanent instructions and labels.
Dismantle the exterior packing and place all components aside.

Inspect all parts prior to installation and start-up. Make sure there is no visible
damage.

Location Requirements

Select a suitable location near point of use.
Hot water pipe should be kept as short as possible to prevent excessive heat loss.

Carefully read all instructions before install.

After installation, dispose of packaging material in the proper manner.

Note:

1.For the best installation, make sure there is at least 1.8 meters distance between the hook
of water heater and the floor. (Refer to installation drawing for more details， Please see page **)

2.Power switch must be away from the water outlet, or make sure there is at least 1.2 meters
distance between them. It can be dangerous when water splashes to the power.

3.The water heater must be installed indoors, it should be located in an area not subject to
freezing temperatures.

4.The material of water heater cover is ABS, so require there is no heat source or combusibles
(Cabinet, curtain, carton ect.) near water heater.

5.Water outlet must be connected to normal water faucet or connecting point.

3

4

Electrical Requirements

We highly recommend you to get a qualified electrician to install the
water heater instead of performing by yourself, unless you are qualified
for electrical installation.

In process to the electrical connections, make sure to follow points
as following:

A. A separate switch is required to be installed.

B. The use of a plug and socket is NOT recommended.
And choose the RCCB(Air-break switch) or junction box according to the table of
technical parameters.

C. The water heater and electrical supply must be earthed.

D. The water heater should the independent wiring, not probably use in common a line
with other electric appliances.

E. All wiring MUST meet the local regulations. Any interrogations, please consult a
qualified electrician. A type connections is shown in Picture

F. Correct size of wire conductor corresponds to different electrical loading should be used.
The following table provides a reference for selection the best type of wire conductor.

250 x 75 x 400mm

3pole 20amp13.75 / Per Phase

20