GLD Products Showdown Dartboard Replacement Parts

Showdown Dartboard

Item 42-0002

SHOWDOWN

ELECTRONIC DARTBOARD

Replacement Parts

Order direct at www.gldproducts.com

or call our Customer Service department at

[phone]

8 am to 4:30 pm Central Standard Time

Publication 42-0002 Rev A
October 2015 UPC Code 7-19265-54408-1

GLD Products Showdown Dartboard

Item 42-0002

Staple your receipt here.

Important: A copy of your receipt will be needed to activate your warranty (see page 34).

GLD Products Showdown Dartboard

Item 42-0002

Congratulations and THANK YOU for purchasing the
Showdown Dartboard. You have chosen a product
that should provide years of entertainment. To assist
you with customer service and warranty claims, staple
your receipt to the inside cover, then keep this manual
in a safe place for future reference.

GLD Products

S84 W19093 Enterprise Drive

Muskego, WI 53150 USA

1-800-225-7593

Fax: [phone]

Email: [e-mail]

Web: www.gldproducts.com

This manual may have been updated. For the latest manual visit the GLD products website.

Place your package near the location where it will be used. Carefully unpack
all components and verify you have all the correct pieces.

If you notice missing or defective parts, please call us at:

1-800-225-7593

Please read and understand all instructions before beginning assembly.

This assembly will require 2 adults.

Choking Hazard

This game has small parts that may break free and present a choking
hazard. Children should be supervised by an adult when playing this game.

3 1-800-225-7593

www.gldproducts.com

GLD Products Showdown Dartboard

Item 42-0002

IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST:

Please refer to page 34.

GLD Products

Available 8 am to 4:30 pm Central Standard Time

S84 W19093 Enterprise Drive

Muskego, WI 53150 USA

1-800-225-7593

Fax: [phone]

Email: [e-mail]

Web: www.gldproducts.com

For all claims, please have your receipt and item number when you call. The product
item number can be found on the front cover.

If you are instructed to return the product for service, you are responsible for
shipping the unit at your expense.

PRODUCT REGISTRATION

Important: The product registration form on page 35 and a copy of your receipt
must be completed and returned within 10 days of purchase to validate your
warranty.

Online registration is also available. Go to www.gldproducts.com/index.php/registration or
click on this link. Follow the online instructions.

WARNING: Parents - Please read instructions carefully. Not for

use by children without adult supervision.

Thank you for purchasing the Showdown Dartboard. The computerized scoring system
makes game playing easy and enjoyable. With 32 games and 595 options/variations to
choose from, beginners and more advanced players will ! nd challenging games to suit
them.

TOOLS REQUIRED

• Tape measure

• Nail or marker

• Phillips screwdriver

• Level

• Mounting hardware (provided)

• 3 AA batteries (not provided)

www.gldproducts.com

41-800-225-7593

GLD Products Showdown Dartboard

Item 42-0002

UNPACKING THE GAME

After unpacking the game, it is important to save the original box, all packing material, and
the receipt. These items will be needed if it ever proves necessary to return the game for
service.

MOUNTING (PHYSICAL INSTALLATION)

Two methods for mounting the dartboard are available.

1. Use the keyhole slots on the backside of the dartboard. Follow the illustration and mount
the dartboard. The two screws are screwed into the wall until the screw head is 3/8"
away from the wall. The dartboard is positioned so the two screw heads are inside the
keyhole. Slide the dartboard down to secure. The head of the screw that is used must
be larger than 1/4" and smaller than 3/8".

2. Four equally spaced holes are accessible from the front to drive in screws. With the
dartboard held in place, four screws are driven in from the front, through the existing
holes. Use 1/8" diameter screws. The head of the screw must ! t inside the pocket.

Wall Anchors

A wall with studs is the most common type of wall to mount the dartboard.

1. Locate a stud and use wood screws or sheet metal type screws to secure the dartboard.

2. If a stud cannot be located or is not in the proper location, use an anchor that is suitable
for the type of wall.

Some common anchors are:

Plastic - Drill a snug hole in drywall and push the anchor in up
to the head. When the screw is screwed into the anchor, the
plastic will expand, locking the anchor in place. Do not use on
thin panelling.

Toggle Bolt - Drill hole through wall. Hole must be large
enough for the wings to pass through. Insert screw through the
holes in the dartboard and thread the toggle wings just onto
the screw. Fold the wings back and push through the hole until
the wings spring open. Pull back on the screw to hold wings
against the inside of the wall and tighten screw.

Hollow wall anchor - Drill a snug hole through the wall. Tap
anchor into the hole until the prongs on the underside of the
head are seated securely into the wall. Turn screw in and
apply pressure to keep the anchor head from turning. Tighten
screw until resistance is felt. Do not over tighten. Turn screw
out to remove. Anchor will stay and screw can be replaced.

Other methods are available. Consult a hardware store if questions arise.

5 1-800-225-7593

www.gldproducts.com

GLD Products Showdown Dartboard

Item 42-0002

Mounting Using the Keyhole Slots

Refer to the illustrations on the following pages.

1. Choose a location that has at least 10 feet of open ! oor space in front of the board.

Locate and use a wall stud for mounting whenever possible.

2. Locate studs and use wood screws or sheet metal screws to secure the dartboard if the
mark is on the stud. The head of the screw must be smaller than 3/8" and larger than 1/4".

3. Determine the location for the dartboard. Place a mark on the wall 68 inches (172.7 cm)
from the ! oor. This mark is the # nal position of the center of the dartboard (bullseye).

4. If the mark is not over a stud, use the mounting hardware that came with your
dartboard.

5. Measure 8-5/8" (21.9 cm) directly up from the bullseye mark and place a mark on the
wall. Then measure down 8-5/8" (21.9 cm) from the bullseye mark and place a mark on
the wall. Use a level to check that all marks are vertical.

6. Drill pilot holes at the two marks. These are for the mounting screws.

7. If using wall anchors, follow the instructions under Wall Anchors on page 5.

8. Insert screws into anchors until a 1/4" (6.5 mm) gap is left between the wall and the
screw head.

9. Hold the dartboard so the two screw heads # t into the lower part of the keyholes. The
dartboard should slide down 1/2 inch and the screw heads will hold it on the wall.

10. Screws can be tightened or loosened to provide a secure mounting.

Mounting Using the Four Holes From the Front

Refer to the illustrations on the following pages.

1. Choose a location that has at least 10 feet of open ! oor space in front of the board.
Locate and use a wall stud for mounting whenever possible.

2. Two people are needed for this step. Hold board on the wall. Position center of bullseye
68" from the ! oor. Level the board. Hold in place.

3. Locate the four mounting holes on the front of the board. Use a marker or nail to mark
the position of the board through the four mounting holes onto the wall. Remove the
board.

4. Drill four pilot holes on the marks created in Step 3.

5. If using plastic anchors: drill the holes so the anchors # t snugly. Push anchors into
place.

6. Line up dartboard over anchors. Screw board into place. The screws will expand the
anchors.

61-800-225-7593

www.gldproducts.com

GLD Products Showdown Dartboard

Center of Bullseye

Throwing or

Toe Line

12.5"

6.25" 6.25"

6.25"

6.25"

8.625"

8.625"

17.25"

68"

To Floor

Bullseye

Keyhole Slots

Screw head diameter
must be larger than 1/4"
and smaller than 3/8"

Mounting holes viewed from back

Item 42-0002

Create the Toe Line

Place a toe line 96" from the face of the board for the throwing distance. Adhesive tape or
masking tape, 2' long by 2-1/2" wide, may be used. GLD products offers a Viper Throwing
Line and a Dart Mat for this purpose.

7 1-800-225-7593

www.gldproducts.com

GLD Products Showdown Dartboard

Item 42-0002

POWER INSTALLATION

The dartboard is designed to be powered by 3 AA batteries (not provided).

• Always install the correct size and grade of battery suitable for the intended use.

• Replace all batteries of a set at the same time, taking care not to mix old and new
ones, or batteries of different types.

• Clean the battery contacts and also those of the device prior to battery installation.

• Ensure the batteries are installed correctly with regard to polarity (+ and -).

• Remove batteries from equipment which is not to be used for an extended period
of time.

• Remove used batteries promptly.

1. The board is not intended for children under the age of 9 years old.

2. The board must only be used with the recommended size batteries.

3. Remove batteries before cleaning.

PROTECTIVE FILM

This electronic dartboard has a clear protective ! lm over the entire display and button
area to prevent scratching during shipping. It is recommended that you remove this ! lm for
easier reading of the display. To remove, simply lift edge, peel off and discard.

WARNING: Not for use by children without adult supervision.

Darts are not toys and may cause injury if used
improperly. Everyone must stand behind the dart
thrower.

IMPORTANT NOTES

1. During shipping or in the course of normal play, it is possible for scoring segments of this
board to become temporarily jammed, resulting in a “frozen” board. If this occurs, the
score of stuck segment will be displayed when players change. Take the following steps
when this error appears:

a. Find the “frozen” segment according to the score display.
b. Press ! rmly down on the “frozen” segment until it breaks free and the loose ! t is

restored. Once the “frozen” segments are loosened, the error message should be
gone and the board will continue to operate normally.

2. This game is designed for use with 1" maximum length soft-tip darts only# Never use metal
tipped darts or longer soft-tip darts on this dartboard# Metal tipped darts will seriously
damage the circuitry, the e-BOARD computer, and electronic operation of the dartboard.

3. Electronic and mechanical reaction time is required between shots. If two shots occur
too close together, pull out second dart and rethrow to properly record your score.

www.gldproducts.com

81-800-225-7593

GLD Products Showdown Dartboard

20 19 18 1617 15 B

P1/3/5/7

C
R

I
C
K
E
T

P2/4/6/8

Temp. Score

Double Option

Enter

Next Player

Page Down MissOn/Off Page Up

Reset

Double

Outer Single

Triple

Inner Single

Single Bullseye

Double Bullseye

Item 42-0002

4. Do not use excessive force when throwing darts. Throwing a dart too hard will cause
frequent tip breakage and cause excessive wear on the board.

5. Do not spill liquids on the dartboard. Do not use spray cleaners that contain ammonia
or other harsh chemicals, as they may damage the dartboard. Instead, we suggest
regular dusting with a damp cloth. Make sure the batteries are removed and use a mild
detergent and a damp cloth for more vigorous cleaning.

6. This game is for indoor use only.

Helpful Tip: To prevent dart tips from loosening, twist the dart to the right (clockwise when
pulling it from the board. This motion will make dart removal easier and will prolong the life
of your dart tips.

1

5

13

4

3

12

7

6

8

9

2

1. Current Player

2. Cricket Display

3. Players 2/4/6/8 Score

4. Double In/Out Setting

5. Players 1/3/5/7 Score

6. On/Off Button

8. Page Down Button

9. Enter Button

10. Miss/Reset Button

11. Next Player Button

12. Battery Compartment

13. Temp Score Display

7. Page Up Button

Segment Scoring Scoring Rules

Single scoring segment score times 1

Double scoring segment score times 2

Triple scoring segment score times 3

Outer bullseye 25 times 1

Center bullseye 25 times 2

10

11

9 1-800-225-7593

www.gldproducts.com

GLD Products Showdown Dartboard

Item 42-0002

QUICK START - IF YOU JUST WANT TO START THROWING DARTS

1. Turn game on by pressing the ON/OFF button.

2. Press the ENTER button.

Note: The default game is G01 301 with 1 player, and single bull.

3. Press the ENTER button. This will select G01 with option L01.

4. Press the ENTER button again to get to number of players. 1P (single player) is
displayed.

5. Use the PAGE UP or PAGE DOWN buttons if you would like to change the number of
players.

6. Press the ENTER button and single bull will be displayed.

7. Press the ENTER button to start the game.

8. Take turns throwing darts. When a players score reaches exactly 0 they are the winner.

www.gldproducts.com

101-800-225-7593

GLD Products Showdown Dartboard

Item 42-0002

DARTBOARD GAME MENU

Game Name Options Players

G01 301 6/12 1-8
G02 501 6/12 1-8
G03 601 6/12 1-8
G04 701 6/12 1-8
G05 801 6/12 1-8
G06 901 6/12 1-8
G07 301 League 6/48 1-8
G08 501 League 6/48 1-8
G09 601 League 6/48 1-8
G10 701 League 6/48 1-8
G11 801 League 6/48 1-8
G12 901 League 6/48 1-8
G13 Count Up 9/18 1-8
G14 Round-The-Clock 12 1-8
G15 Shanghai 4 1-8
G16 Hi Score 12/24 1-8
G17 Shoot Out 19 1-8
G18 Cricket 3/6 1-8
G19 No Score Cricket 3/6 1-8
G20 Cut Throat Cricket 3/6 1-8
G21 Killer Cricket 3/6 2-8
G22 Low Pitch Cricket 3/6 1-8
G23 Color 5 1-8
G24 Bonus Color 5 1-8
G25 Correctional Color 5 1-8
G26 No Score Color 5 2-8
G27 Free Dart Color 4 1-8
G28 Overs 19/38 2-8
G29 Unders 19/38 2-8
G30 Halve-It 1/2 1-8
G31 Big-6 19 2-8
G32 21 Points 7 1-8

Total 595

11 1-800-225-7593

www.gldproducts.com

GLD Products Showdown Dartboard

20 19 18 1617 15 B

P1/3/5/7

C
R

I
C
K
E
T

P2/4/6/8

Temp. Score

Double Option

Enter

Next Player

Page Down MissOn/Off Page Up

Reset

Item 42-0002

READ FIRST - OPERATION

The dartboard is powered by batteries. The battery compartment is opened from the front.
Insert 3 AA batteries following the polarity shown inside the battery compartment.

Step 1

Step 1

Step 2, 3, 4, 5

1. Press the ON/OFF button to turn on the game. When the power is turned ON, the
displays will light up. The Temp. Score display will show “G01”.

2. Press the PAGE UP or PAGE DOWN buttons to scroll through the games. The

selection is shown on the Temp. Score display. Then press ENTER to con! rm the game
selection. The choices are printed on the dartboard.

3. Press the PAGE UP or PAGE DOWN buttons to select an option (if you are playing
games G01 thru G12 see step 4) and press ENTER to con! rm the selection.

4. If selecting G01 to G06 games or G07 to G12 leagues, press the PAGE UP or PAGE
DOWN buttons to further select the Double/Single/Master Options. Press ENTER to
con! rm the selection.

IF SELECTING OPTION THEN

L01 No icons are lit up Single In/Single Out
L02 DI icon lit up Double In/Single Out
L03 DO icon lit up Single In/Double Out
L04 DI and DO icons lit up Double In/Double Out
L05 MO icon lit up Single In/Master Out (double or triple)
L06 DI and MO icons lit up Double In/Master Out (double or triple)

5. Press the PAGE UP or PAGE DOWN buttons to select number of players. There are
9 selections of players from 1 player mode to 8 players mode plus a computer player
mode. Press ENTER to con! rm the selection and start the game. For more than 2
players, some players will share the player score display.

www.gldproducts.com

121-800-225-7593