GLD Products 787 Dartboard Replacement Parts
GLD Products 787 Dartboard
Item 42-0001
Viper 787
ELECTRONIC DARTBOARD
Replacement Parts
Order direct at www.gldproducts.com
or call our Customer Service department at
(800) 225-7593
8 am to 4:30 pm Central Standard Time
Publication 42-0001 Rev C UPC Code 7-19265-51779-5
September 2016
GLD Products 787 Dartboard
Item 42-0001
Staple your receipt here.
Important: A copy of your receipt will be needed to activate your warranty (see page 39).
GLD Products 787 Dartboard
Item 42-0001
Congratulations and THANK YOU for purchasing the
787 Dartboard. You have chosen a product that
should provide years of entertainment. To assist you
with customer service and warranty claims,
staple your receipt to the inside cover, then keep this
manual in a safe place for future reference.
GLD Products
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: 1-800-841-6944
Email: gld@gldmfg.com
Web: www.gldproducts.com
This manual may have been updated. For the latest manual visit the GLD products website.
Place your package near the location where it will be used. Carefully unpack
all components and verify you have all the correct pieces.
If you notice missing or defective parts, please call us at:
1-800-225-7593
Please read and understand all instructions before beginning assembly.
This assembly will require 2 adults.
Choking Hazard
This game has small parts that may break free and present a choking
hazard. Children should be supervised by an adult when playing this game.
3 1-800-225-7593
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST
Please see page 39.
GLD Products
Available 8 am to 4:30 pm Central Standard Time
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: 1-800-841-6944
Email: gld@gldmfg.com
Web: www.gldproducts.com
For all claims, please have your receipt and item number when you call. The
product item number can be found on the front cover.
If you are instructed to return the product for service, you are
responsible for shipping the unit at your expense.
PRODUCT REGISTRATION
Important: The product registration form on page 41 and a copy of your
receipt must be completed and returned within 10 days of purchase to
validate your warranty.
Online registration is also available. Go to www.gldproducts.com/index.php/registration or
click on this link. Follow the online instructions.
WARNING:
Parents - Please read instructions carefully. Not
for use by children without adult supervision.
Thank you for purchasing the GLD 787 Dartboard. The computerized scoring system makes
game playing easy and enjoyable. With 43 games and 240 options to choose from,
beginners and more advanced players will find challenging games to suit them.
TOOLS REQUIRED
• Tape measure
• Nail or marker
• Phillips screwdriver
• Level
• Mounting hardware (provided)
• 4 AA batteries (not provided)
1-800-225-7593 4
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
UNPACKING THE GAME
After unpacking the game, it is important to save the original box, all packing material, and
the receipt. These items will be needed if it ever proves necessary to return the game for
service.
MOUNTING (PHYSICAL INSTALLATION)
Two methods for mounting the dartboard are available.
1. Use the two keyhole slots and mount the center of the dartboard following the illustration.
The two screws are screwed into the wall until the screw head is 3/8" away from the wall.
The dartboard is positioned so the two screw heads are inside the keyhole. Slide the
dartboard down to secure. The head of the screw that is used must be larger than 5/16"
and smaller than 3/8".
2. Four equally spaced holes are accessible from the front to drive in screws. With the
dartboard held in place, four screws are driven in from the front, through the existing
holes. Use 1/8" diameter screws. The head of the screw must fit inside the pocket.
Wall Anchors
A wall with studs is the most common type of wall to mount the dartboard.
1. Locate a stud and use wood screws or sheet metal type screws to secure the dartboard.
2. If a stud cannot be located or is not in the proper location, use an anchor that is suitable
for the type of wall.
Some common anchors are:
Plastic - Drill a snug hole in drywall and push the anchor in up
to the head. When the screw is screwed into the anchor, the
plastic will expand, locking the anchor in place. Do not use on
thin panelling.
Toggle Bolt - Drill hole through wall. Hole must be large
enough for the wings to pass through. Insert screw through the
holes in the dartboard and thread the toggle wings just onto
the screw. Fold the wings back and push through the hole until
the wings spring open. Pull back on the screw to hold wings
against the inside of the wall and tighten screw.
Hollow wall anchor - Drill a snug hole through the wall. Tap
anchor into the hole until the prongs on the underside of the
head are seated securely into the wall. Turn screw in and
apply pressure to keep the anchor head from turning. Tighten
screw until resistance is felt. Do not over tighten. Turn screw
out to remove. Anchor will stay and screw can be replaced.
Other methods are available. Consult a hardware store if questions arise.
5 1-800-225-7593
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
Mounting Using the Keyhole Slots
1. Choose a location that is near an electrical outlet and has at least 10 feet of open floor
space in front of the board. Locate and use a wall stud for mounting whenever possible.
2. Determine the location for the dartboard. Place a mark on the wall 68 inches (172.7 cm)
from the floor. This mark is the final position of the center of the dartboard (bullseye).
3. Locate studs and use wood screws or sheet metal screws to secure the dartboard if the
mark is on the stud. The head of the screw must be larger than 5/16" and smaller than
3/8".
4. If the mark is not over a stud, use the mounting hardware that came with your dartboard.
5. Measure 8-3/4" (22.2 cm) directly up from the bullseye mark and place a mark on the
wall.Then measure down 8-1/2" (21.6 cm) from the bullseye mark and place a mark on
the wall. Use a level to check that all marks are vertical.
6. Drill pilot holes at the two marks. These are for the mounting screws.
7. If using wall anchors, follow the instructions under Wall Anchors on page 5.
8. Insert screws into anchors until a 1/4" (6.5 mm) gap is left between the wall and the
screw head.
9. Hold the dartboard so the two screw heads fit into the lower part of the keyholes. The
dartboard should slide down 1/2 inch and the screw heads will hold it on the wall.
10.Screws can be tightened or loosened to provide a secure mounting.
Mounting Using the Four Holes From the Front
1. Choose a location that is near an electrical outlet and has at least 10 feet of open floor
space in front of the board. Locate and use a wall stud for mounting whenever possible.
2. Two people are needed for this step. Hold board on the wall. Position center of bullseye
68" from the floor. Level the board. Hold in place.
3. Locate the four mounting holes on the front of the board. Use a marker or nail to mark the
position of the board through the four mounting holes onto the wall. Remove the board.
4. Drill four pilot holes on the marks created in Step 3.
5. If using plastic anchors: drill the holes so the anchors fit snugly. Push anchors into place.
6. Line up dartboard over anchors. Screw board into place. The screws will expand the
anchors.
7. After the board is mounted, the bullseye should be 68" (173 cm) above the floor.
1-800-225-7593 6
www.gldproducts.com
GLD Products 787 Dartboard
Center of Bullseye
Wall
Throwing or
Toe LIne
Plumb Line from
Face of Board to Floor
Floor
96 in.
68 in.
12.5"
6.25" 6.25"
6.25"
6.25"
8.5"
8.75"
17.25"
68"
To Floor
Bullseye
Keyhole Slots
Item 42-0001
Create the Toe Line
Place a toe line 96" from the face of the board for the throwing distance. Adhesive tape or
masking tape, 2' long by 2-1/2" wide, may be used. GLD Products offers a Viper Throwing
Line and a Dart Mat for this purpose. Refer to the parts order form at the back of this
manual.
7 1-800-225-7593
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
POWER INSTALLATION
The 787 dartboard can be powered by 4 AA batteries or an external power supply.
The battery compartment can be opened from the front to install the 4 AA batteries.
Always install the correct size and grade of battery suitable for the intended use. Replace all
batteries of a set at the same time, taking care not to mix old and new ones, or batteries of
different types. Clean the battery contacts and also those of the device prior to battery
installation. Ensure the batteries are installed correctly with regard to polarity (+and -).
Remove batteries from equipment which is not to be used for an extended period of time.
Remove used batteries promptly.
The power supply must be 120V, 60 Hz, 12 w input with 1000 mA, 5 VDC output. The round
plug for the dartboard has a positive outside and a negative center. Remove the batteries
and plug the power supply into the jack on the side of the dartboard.
To conserve power, this dartboard is equipped with a sleep mode and an auto power-off
mode. If the dartboard is not being used, it will automatically enter sleep mode after 5
minutes and will turn off after 30 minutes.
CAUTION: The power adapter is not a battery charging device.
Do not plug in the power adapter when the dartboard is
turned on.
Remove all the batteries before plugging in the power
supply.
1. The board is not intended for children under the age of 3 years old.
2. The board must only be used with the recommended transformer.
3. The transformer is not a toy.
4. Disconnect the dartboard from the transformer before cleaning.
PROTECTIVE FILM
This electronic dartboard has a clear protective film over the entire display and button area
to prevent scratching during shipping. It is recommended that you remove this film for easier
reading of the display. To remove, simply lift edge, peel off and discard.
WARNING:
Not for use by children without adult supervision.
Darts are not toys and may cause injury if used
improperly. Everyone must stand behind the dart
thrower.
1-800-225-7593 8
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
IMPORTANT NOTES
1. During shipping or in the course of normal play, it is possible for scoring segments of this
board to become temporarily jammed, resulting in a “frozen” board. If this occurs, the
built-in Self Diagnostic Function of the e-BOARD Computer will be activated
automatically. Your dartboard will run a self-test routine to determine which segment is
stuck. An error message will flash on the display together with the number for the
“Frozen” segment.
Error Code Malfunction
OE rr 25 D Inner Bullseye
OE rr 25 Outer Bullseye
OE rr XX Single segment for the number displayed at "XX"
OE rr XX D Double segment for the number displayed at "XX"
OE rr XX T Triple segment for the number displayed at "XX"
Take the following steps immediately when the error message appears.
a. Find the “frozen” segment according to the display.
b. Press firmly down on the “frozen” segment until it breaks free and the loose fit is
restored. Once the “frozen” segments are loosened, the error message should be
gone and the board will continue to operate normally.
2. This game is designed for use with 3/4" length soft-tip darts only! Never use metal tipped
darts or longer soft-tip darts on this dartboard! Metal tipped darts will seriously damage
the circuitry, the e-BOARD computer, and electronic operation of the dartboard.
3. Electronic and mechanical reaction time is required between shots. If two shots occur too
close together, pull out second dart and rethrow to properly record your score.
4. Use only the provided AC adapter. Using the wrong adapter may cause electrical
shock and damage to the unit.
5. Do not use excessive force when throwing darts. Throwing a dart too hard will cause
frequent tip breakage and cause excessive wear on the board.
6. Do not spill liquids on the dartboard. Do not use spray cleaners that contain ammonia or
other harsh chemicals, as they may damage the dartboard. Instead, we suggest regular
dusting with a damp cloth. Make sure the game is unplugged and use a mild detergent
and a damp cloth for more vigorous cleaning.
7. This game is for indoor use only.
Helpful Tip: To prevent dart tips from loosening, twist the dart to the right (clockwise) when
pulling it from the board. This motion will make dart removal easier and will prolong the life of
your dart tips.
9 1-800-225-7593
www.gldproducts.com
GLD Products 787 Dartboard
Double
Outer Single
Triple
Inner Single
Single Bullseye
Double Bullseye
Item 42-0001
SELF-TEST
With the board turned off, press and hold the two single segments of #20. Power on the
dartboard and watch the display. The segments will be displayed in sequence. If any of the
segments are not displayed, the display is damaged.
GAME OPERATIONS
Segment Scoring Scoring Rules
Single scoring segment score times 1
Double scoring segment score times 2
Triple scoring segment score times 3
Outer bullseye 25 times 1
Center bullseye 25 times 2
QUICK START - IF YOU JUST WANT TO START THROWING DARTS
1. Turn game on by pressing the ON/OFF button.
2. Press the BOUNCE OUT/301 button.
NOTE: The default game is G01 301 with 4 players.
3. Press the START button.
4. Take turns throwing darts. The first player to get their score to exactly zero wins.
ELECTRONIC GAME MENU
Game Description Options Players
G01 301 6 1-16
G01 501 6 1-16
G01 601 6 1-16
G01 701 6 1-16
G01 801 6 1-16
G01 901 6 1-16
G02 Killers 13 2-16
G03 Shanghai 14 1-16
G04 Count Up 100 2 1-16
G04 Count Up 200 2 1-16
G04 Count Up 300 2 1-16
G04 Count Up 400 2 1-16
G04 Count Up 500 2 1-16
G04 Count Up 600 2 1-16
1-800-225-7593 10
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
Game Description Options Players
G04 Count Up 700 2 1-16
G04 Count Up 800 2 1-16
G04 Count Up 900 2 1-16
G05 Shoot Out 12 1-16
G06 Best of Nine 9 1-16
G07 Call Three 10 1-16
G08 Hound and Hare 7 2
G09 Gold Hunting 8 1-16
G10 Quick Cricket 5 1-16
G11 American Cricket 5 1-16
G12 Cut Throat Cricket 5 1-16
G13 Scram Cricket 2 2
G14 Double Only Cricket 5 1-16
G15 Round The Clock 14 1-16
G16 Round The Clock The Irish Way 2 1-16
G17 Nine Dart Century 5 2-16
G18 Shove A Penny 2 1-16
G19 Baseball 5 1-16
G20 Football 1 1-16
G21 Bowling 8 1-16
G22 Golf 12 1-16
G23 Big Six 7 2-16
G24 Hi-Score 12 1-16
G25 Double Down 2 1-16
G26 Forty One 2 1-16
G27 Over 5 2-16
G28 Under 5 2-16
G29 All Fives 7 1-16
G30 Car Racing 2 1-16
Total 240
11 1-800-225-7593
www.gldproducts.com
GLD Products 787 Dartboard
GAME
# OF PLAYERS
OPTIONS
ON/OFF
MISSED
DART SOUND LEVEL
AUTO CHANGE
301 CRICK ET COUNT UP BULL 25/50
DOUBLE
IN/OUT
BOUNCE
OUT
ELIMINATE
DART SCORE
START
PLAYERS CHANGE
1
2
3
4
5
6
7
8
9
10
Item 42-0001
DARTBOARD FUNCTIONS
Buttons
1. ON/OFF button: Press to turn dartboard ON. Press and hold to turn the dartboard OFF.
2. SOUND LEVEL/BULL 25/50 button: Press during a game to change the sound level.
Press before starting a game to select single or double bullseye.
3. DOUBLE IN/OUT/AUTO CHANGE button: Press before starting a G01 game to select
Double In and Double Out options. Press during a game to activate the automatic player
change feature.
4. # OF PLAYERS button: Press before starting a game to select the number of players.
5. OPTIONS button: Press before starting a game to select the options for the game. The
selection applies to all players.
6. GAME button: Press repeatedly to scroll through the game selections.
7. BOUNCE OUT/301 button: Press during a game to eliminate the score of a thrown dart
that does not stick (bounce out). The ELIMINATE DART SCORE button must be pressed
to complete the deletion. Press during game selection to jump to game G01 option 301.
8. START/PLAYERS CHANGE button: Press after game selections have been made to
start the game. Press during a game to change to the next player.
9. ELIMINATE DART SCORE/CRICKET button: During a game press after the BOUNCE
OUT/301 button has been pressed. This will complete the elimination of the darts score.
Press during game selection to jump to game G10 Quick Cricket.
10.MISSED DART/COUNT UP button: Press during a game to score zero for a dart that
missed the scoring area. Press during game selection to jump to game G04 Count Up.
1-800-225-7593 12
www.gldproducts.com
GLD Products 787 Dartboard
P
L
A
Y
E
R
PLAYER SCORE
SCORE 20 19 18 17 16 15 B
CRICKET
GAME
OPTION
1
2
3
4
5
6
7
8
9
Item 42-0001
Game/Player Display
1. Cricket Display: Used to show hits, open segments and closed segments.
2. Shows game selection. During a game this line shows Players 1, 5, 9 and 13.
3. Shows game options. During a game this line shows Players 2, 6, 10 and 14.
4. Shows number of players. During a game this line shows Players 3, 7, 11 and 15.
5. During a game this line shows Players 4, 8, 12 and 16.
6. Shows Double In/Double Out selection.
7. Displays active player.
8. Displays darts thrown and score.
9. Displays temporary score for the active player.
READ FIRST - OPERATION
1. Plug the dartboard in or put 4 AA batteries in.
2. Press the ON/OFF button. When the dartboard turns on a welcoming fanfare will play.
3. Press the GAME button to scroll through the game menu. Selection will be displayed at
Player 1’s score display. While selecting games, you can push the 301 button to jump
you to G01 301. You can also press the CRICKET button to jump you to G10 Quick
Cricket. Also pressing the COUNT UP button will jump you to G04 Count Up.
4. Press the OPTION button to select the designed options/difficulties of the game for all
players. Selection will be displayed at Player 2’s score display.
5. Press the # OF PLAYERS button to select the number of players. The selection will be
displayed at Player 3’s score display. The maximum number of players is limited to 16.
For more than 4 players, the players have to share the player’s score display and Cricket
display with other players as indicated on the dartboard and announced by the computer.
13 1-800-225-7593
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
6. For G01 301, 501, 601, 701, 801, 901, players can also press the DOUBLE/IN/OUT
button to select Double In/Double Out options before starting. The display will show “IN”
or “OUT” to show your selection.
• “IN” text displayed Double In/Any Segment Out
• “OUT” text displayed Any Segment In/Double Out
• Both “IN” and “OUT” text displayed Double In/Double Out
• No text displayed Any Segment In/Any Segment Out
7. For all the games you can select a Single Bull or Double Bull. Press the BULL/25/50
button before starting a game to select. The Player 4’s scoreboard will show “SbU” for
single and “dbU” for double.
DOUBLE BULL Inner ring = 50 points and the outer ring = 25 points.
SINGLE BULL Both rings = 50 points.
8. Press START/PLAYERS CHANGE to start a game.
9. While in a game you can change the sound level. Press the SOUND LEVEL/BULL 25/50
button to change the sound. Three levels of beeps will be heard.
10.If a dart thrown at the board scores, but does not stick in the board, you can eliminate
that score. Press the BOUNCE OUT button until the score you wish to eliminate flashes.
Then eliminate this score by pressing the ELIMINATE DART SCORE button.
11.If a dart thrown at the dartboard dosen’t hit the scoring segments you can push the
MISSED DART button.
12.This dartboard is equipped with at standby and automatic shut off as a power saving
feature. If the dartboard is untouched for 5 minutes it will go into a standby mode. Push
any button to return to what you were doing. If untouched for long enough it will
automatically shut off. To turn the dartboard off, press and hold the ON/OFF button.
13.During a game you can push the AUTO CHANGE button to activate the Automatic
Player Change feature. There is no indication on the board that this is activated or not. If
it is activated the game will change to the next player after a turn is over automatically
after 10 seconds. If this is not activated you must push the START/PLAYERS CHANGE
button after your turn has ended to switch to the next player.
14.When a player finishes the game first, the game will announce “winner” and the
celebration and applause will be heard.
1-800-225-7593 14
www.gldproducts.com
GLD Products 787 Dartboard
Item 42-0001
GAME DESCRIPTIONS AND RULES
G01 301 (with scoring options of 301, 501, 601, 701, 801, 901)
Game Options:
Single In/Single Out
Double In/Single Out
Double In/Double Out
Single In/Double Out
Double Bull
Single Bull
Your scoring options are the starting score for the game, see the chart below.
Scoring Option 301 501 601 701 801 901
Starting Score 301 501 601 701 801 901
Refer to the section “Read First - Operation”.
Playing the Game
To win: The first player who reaches exactly zero wins.
• The starting score for each player is 301 (or 501/601/701/801/901) as selected before
starting the game.
• The score will be deducted for each dart that scores.
• For Single In or Single Out options, the game can be started or ended by throwing at
any segment, regardless if single, double or triple.
• If you select Double In, you must hit a double segment to start the game. If you select
Double Out you must hit the double segment, that brings your score to zero, to end the
game.
• If Double Out has been selected, the Dart Out feature is automatically activated. In this
mode, once a player is 170 or below, the e-BOARD Computer will suggest the best
possible finishing shots, or if an OUT is not possible, the best remaining alternative
shots are displayed on dart display.
15 1-800-225-7593
www.gldproducts.com
Loading...