Gld Viper 777 User Manual
777 Electronic Dartboard
Item 42-0000 B
VIPER 777
ELECTRONIC DARTBOARD
Replacement Parts
Order direct at www.gldproducts.com
or call our Customer Service department at
8 am to 4:30 pm Central Standard Time
Publication 42-0000 B Rev J
September 2016 UPC Code 7-19265-51777-1
(800) 225-7593
GLD Products
777 Electronic Dartboard
Item 42-0000 B
Staple your receipt here.
Important: A copy of your receipt will be needed to activate your warranty (see page 32).
GLD Products
777 Electronic Dartboard
Item 42-0000 B
Congratulations and THANK YOU for purchasing the 777
Electronic Dartboard. You have chosen a product that should
provide years of entertainment. To assist you with customer
service and warranty claims, staple your receipt to the
inside cover, then keep this manual in a safe place for future
reference.
GLD Products
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: 1-800-841-6944
Email: gld@gldmfg.com
Web: www.gldproducts.com
This manual may have been updated. For the latest manual or a manual in Spanish, visit
the GLD products website.
Este manual puede haber sido actualizado. Para obtener el último manual, visite el sitio
web de GLD Products.
Place your package near the location where it will be used. Carefully
unpack all components and verify you have all the correct pieces.
If you notice missing or defective parts, please call us at:
1-800-225-7593
Choking Hazard
This game has small parts that may break free and present a
choking hazard. Children should be supervised by an adult when
playing this game.
3
www.gldproducts.com
1-800-225-7593
GLD Products
777 Electronic Dartboard
Item 42-0000 B
IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST:
Please refer to page 32.
GLD Products
Available 8 am to 4:30 pm Central Standard Time
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: 1-800-841-6944
Email: gld@gldmfg.com
Web: www.gldproducts.com
For all claims, please have your receipt and item number when you call. The product
item number can be found on the front cover.
If you are instructed to return the product for service, you are responsible for
shipping the unit at your expense.
PRODUCT REGISTRATION
Important: The product registration form on page 33 and a copy of your receipt
must be completed and returned within 10 days of purchase to validate your
warranty.
Online registration is also available. Go to www.gldproducts.com/index.php/registration or click on this
link. Follow the online instructions.
WARNING: Parents - Please read instructions carefully. Not for use
by children without adult supervision.
Thank you for purchasing the GLD 777 Electronic Dartboard. The computerized scoring system makes
game playing easy and enjoyable. With 43 games and 320 options to choose from, beginners and more
advanced players will be nd games that are challenging.
TOOLS REQUIRED
• Nail or Marker
• Phillips Screwdriver
• Three AA Batteries
• Two Mounting Screws (Included)
• Two Mounting Screws with Wall Anchors (Included)
1-800-225-7593
www.gldproducts.com
4
GLD Products
777 Electronic Dartboard
Item 42-0000 B
UNPACKING THE DARTBOARD
After unpacking the game, it is important to save the original box, all packing material, and the receipt.
These items will be needed if it ever proves necessary to return the game for service.
MOUNTING (PHYSICAL INSTALLATION)
Two methods for mounting the dartboard are available.
1. Use the two keyhole slots and mount the center of the dartboard following the illustration. The two
screws are screwed into the wall until the screw head is 3/8" away from the wall. The dartboard is
positioned so the two screw heads are inside the keyhole. Slide the dartboard down to secure. The
head of the screw that is used must be larger than 5/16" and smaller than 3/8".
2. Four equally spaced holes are accessible from the front to drive in screws. With the dartboard held
in place, four screws are driven in from the front, through the existing holes. Use 1/8" diameter
screws. The head of the screw must t inside the pocket.
Wall Anchors
1. Locate a stud and use wood screws or sheet metal type screws to secure the mounting bracket.
2. If a stud cannot be located or is not in the proper location, use the plastic anchors and screws.
Some common anchors are:
Plastic - Drill a snug hole in drywall and push the anchor in up to
the head. When the screw is screwed into the anchor, the plastic will
expand, locking the anchor in place. Do not use on thin panelling.
Toggle Bolt - Drill hole through wall. Hole must be large enough for the
wings to pass through. Insert screw through the holes in the mounting
bracket and thread the toggle wings just onto the screw. Fold the wings
back and push through the hole until the wings spring open. Pull back
on the screw to hold wings against the inside of the wall and tighten
screw.
Hollow wall anchor - Drill a snug hole through the wall. Tap anchor
into the hole until the prongs on the underside of the head are seated
securely into the wall. Turn screw in and apply pressure to keep the
anchor head from turning. Tighten screw until resistance is felt. Do not
over tighten. Turn screw out to remove. Anchor will stay and screw can
be replaced.
Other methods are available. Consult a hardware store if questions arise.
5
www.gldproducts.com
1-800-225-7593
GLD Products
777 Electronic Dartboard
Item 42-0000 B
Mounting Using the Keyhole Slots
1. Choose a location that is near an electrical outlet and has at least 10 feet of open oor space in
front of the board. Locate and use a wall stud for mounting whenever possible.
2. Determine the location for the dartboard. Place a mark on the wall 68 inches (172.7 cm) from the
oor. This mark is the nal position of the center of the dartboard (bullseye).
3. Locate studs and use wood screws or sheet metal screws to secure the dartboard if the mark is
on the stud. The head of the screw must be larger than 5/16" and smaller
than 3/8".
4. If the mark is not over a stud, use the mounting hardware that came with your dartboard.
5. Measure 8-3/4" (22.2 cm) directly up from the bullseye mark and place a mark on the wall. Then
measure down 8-1/2" (21.6 cm) from the bullseye mark and place a mark on the wall. Use a level
to check that all marks are vertical.
6. Drill pilot holes at the two marks. These are for the mounting screws.
7. If using wall anchors, follow the instructions under Wall Anchors on page 8.
8. Insert screws into anchors until a 1/4" (6.5 mm) gap is left between the wall and the screw head.
9. Hold the dartboard so the two screw heads t into the lower part of the keyholes. The dartboard
should slide down 1/2 inch and the screw heads will hold it on the wall.
10. Screws can be tightened or loosened to provide a secure mounting.
Mounting Using the Four Holes From the Front
1. Choose a location that is near an electrical outlet and has at least 10 feet of open oor space in
front of the board. Locate and use a wall stud for mounting whenever possible.
2. Two people are needed for this step. Hold board on the wall. Position center of bullseye 68" from
the oor. Level the board. Hold in place.
3. Locate the four mounting holes on the front of the board. Use a marker or nail to mark the position
of the board through the four mounting holes onto the wall. Remove the board.
4. Drill four pilot holes on the marks created in Step 3.
5. If using plastic anchors: drill the holes so the anchors t snugly. Push anchors into place.
6. Line up dartboard over anchors. Screw board into place. The screws will expand the anchors.
7. After the board is mounted, the bullseye should be 68" (173 cm) above the oor.
1-800-225-7593
www.gldproducts.com
6
GLD Products
777 Electronic Dartboard
Item 42-0000 B
Center of Bullseye
Throwing or
Toe LIne
6.25"
6.25"
Keyhole Slots
Bullseye
Plumb Line from
Face of Board to Floor
Floor
96" (2.4 m)
8.75"
8.5"
6.25" 6.25"
12.5"
17.25"
68" (1.73 m)
To Floor
Wall
68"
7
www.gldproducts.com
1-800-225-7593
GLD Products
777 Electronic Dartboard
Item 42-0000 B
CREATE THE TOE LINE
Place a toe line 96" from the face of the board for the throwing distance. Adhesive tape or masking tape,
2' long by 2-1/2" wide, may be used. GLD products also offers a Viper Throwing Line and a Dart Mat for
this purpose.
POWER INSTALLATION
The dartboard is designed to be powered by 3 AA batteries (not provided). Open the battery cover on
the front to install the batteries. To conserve batteries, this dartboard is equipped with a sleep mode and
an auto power-off mode. If the dartboard is not being used, it will automatically enter sleep mode after 3
minutes and will turn off after 30 minutes.
The dartboard can also be powered by an external power supply. The power supply must be AC to 5V
DC, 1000 milliamp (minimum) adapter with the DC plug polarity congured as positive (+) outside and
negative (-) inside. Remove the batteries and plug the power supply into the jack on the side of the
dartboard.
CAUTION: The power adapter is not a battery charging device.
Do not plug in the power adapter when the dartboard is turned on.
Remove all the batteries before plugging in the power supply.
• Always install the correct size and grade of battery suitable for the intended use.
• Replace all batteries of a set at the same time, taking care not to mix old and new ones,
or batteries of different types.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Remove used batteries promptly.
1. The board is not intended for children under the age of 9 years old.
2. The board must only be used with the recommended size batteries.
3. Remove batteries before cleaning.
4. The board must only be used with the recommended transformer.
5. The transformer is not a toy.
6. Disconnect the dartboard from the transformer before cleaning.
PROTECTIVE FILM
This electronic dartboard has a clear protective lm over the entire display and button area to prevent
scratching during shipping. It is recommended that you remove this lm for easier reading of the display.
To remove, simply lift edge, peel off and discard.
WARNING:
Not for use by children without adult supervision. Darts are not
toys and may cause injury if used improperly. Everyone must
stand behind the dart thrower.
1-800-225-7593
www.gldproducts.com
8
GLD Products
777 Electronic Dartboard
Item 42-0000 B
IMPORTANT NOTES
1. During shipping or in the course of normal play, it is possible for the buttons of the dartboard
to become temporarily jammed, resulting in a “frozen” screen. If this occurs, the built-in Self
Diagnostic Function of the computer will be activated automatically. It will run a self-test routine
to determine which button is stuck. An error message will show on the display together with the
number for the “Frozen” button.
Error Code Malfunction Error Code Malfunction
E d25 Inner Bullseye E 36 Bounce Out Amend
E 25 Outer Bullseye E 37 Volume Control
E 30 Game Button E 38 Language
E 31 Option Button E 39 Start/Next
E 32 # of Players E 0X Single segment for the number displayed at "X"
E 33 Handicap Button E dX Double segment for the number displayed at "X"
E 34 Double/Miss Button E tX Triple segment for the number displayed at "X"
E 35 On/Off Button
2. Take the following steps immediately when the error message appears.
a. Find the “frozen” segment according to the display.
b. Press rmly down on the “frozen” segment until it breaks free and the loose t is restored.
Once the “frozen” segments are loosened, the error message should be gone and the
board will continue to operate normally.
3. This game is designed for use with 3/4" length soft-tip darts only! Never use metal tipped darts or
longer soft-tip darts on this dartboard! Metal tipped darts will seriously damage the circuitry, the
computer, and electronic operation of the dartboard.
4. Electronic and mechanical reaction time is required between shots. If two shots occur too close
together, pull out second dart and rethrow to properly record your score.
5. Use only the recommended AC adapter. Using the wrong adapter may cause electrical shock and
damage to the unit.
6. Do not use excessive force when throwing darts. Throwing a dart too hard will cause frequent tip
breakage and cause excessive wear on the board.
7. Do not spill liquids on the dartboard. Do not use spray cleaners that contain ammonia or other
harsh chemicals, as they may damage the dartboard. Instead, we suggest regular dusting with
a damp cloth. Make sure the game is unplugged and use a mild detergent and a damp cloth for
more vigorous cleaning.
8. This game is for indoor use only.
9
www.gldproducts.com
1-800-225-7593
GLD Products
Double
Double Bullseye
GAME OPERATIONS
Segment Scoring Scoring Rules
Single scoring segment score times 1
Double scoring segment score times 2
Triple scoring segment score times 3
Outer bullseye 25 times 1
Center bullseye 25 times 2
READING THE DISPLAY
20 19 18 17 16 15 B
20 19 18 17 16 15 B
777 Electronic Dartboard
Item 42-0000 B
Outer Single
Triple
Inner Single
Single Bullseye
QUICK START - IF YOU JUST WANT TO START THROWING DARTS
1. Turn game on by pressing the ON/OFF button.
2. Press the START/NEXT button once.
Note: The default game is G01 Count Up with 2 players.
3. Take turns throwing darts. The rst player to get their score to 100 wins.
1-800-225-7593
www.gldproducts.com
10
GLD Products
777 Electronic Dartboard
Item 42-0000 B
DARTBOARD GAME MENU
Game Name Options Players
G01 Count-up 9/18 1-8
G02 301 4/8 1-8
G03 501 4/8 1-8
G04 601 4/8 1-8
G05 701 4/8 1-8
G06 801 4/8 1-8
G07 901 4/8 1-8
G08 301 League 4/8 4
G09 501 League 4/8 4
G10 601 League 4/8 4
G11 701 League 4/8 4
G12 801 League 4/8 4
G13 901 League 4/8 4
G14 Round the Clock 12/24 1-8
G15 Simple Cricket 3/6 1-8
G16 Standard Cricket 3/6 1-8
G17 Cut Throat Cricket 3/6 1-8
G18 Scram Cricket 1/2 2
G19 Hi-Score 10/20 1-8
G20 Shoot Out 10 1-8
G21 Shanghai 12 1-8
G22 Double Down 1/2 1-8
G23 Forty One 1/2 1-8
G24 All Fives 5/10 1-8
G25 Big 6 5/10 1-8
G26 Over 3/6 2-8
G27 Under 3/6 2-8
G28 Baseball 3 1-8
G29 By 5’s 1 1-8
G30 By 10’s 1 1-8
11
www.gldproducts.com
1-800-225-7593
GLD Products
777 Electronic Dartboard
Item 42-0000 B
Game Name Options Players
G31 By Odd’s 1 1-8
G32 Killer 30 2-8
G33 9 Lives 7 2-8
G34 Halve-it 1 1-8
G35 Bingo 4 1-8
G36 21 Points 7 1-8
G37 Nine Dart Century 3/6 1-8
G38 Best of Nine 5/10 1-8
G39 Hound and Hare 5/10 2
G40 Shooting I 1/2 1-8
G41 Shooting II 1/2 1-8
G42 Shooting III 1/2 1-8
G43 Shooting IV 1/2 1-8
Total 320
READ FIRST - OPERATION
1. Press ON/OFF button on the front panel of the dartboard to turn the dartboard on. At power-up the
dartboard will play a short introduction.
2. Press the GAME button to scroll through the game menu.
3. Press the # OF PLAYERS button to select the number of players. The maximum number of
players is limited to 8.
4. Press the OPTIONS button to select the designed options/difculties of the game for all players.
For 301, 501, 601, 701, 801, 901 and 301 League games, players can also select Double In/
Double Out options before starting.
• Double In Double In/Any Segment Out
• Double Out Any Segment In/Double Out
• Double In/Double Out Double In/Double Out
• Single In /Single out Any Segment In/Any Segment Out
5. Most of the games have the option of double bullseye. This scores both rings as 50. Press the
DOUBLE/MISS button to select double bullseye. Press again to return to single bullseye. The
cricket display will show the selection above (Single Bull) or below (Double Bull) the "B" position
(see illustration in READING THE DISPLAY on page 10).
6. For some games, handicap mode can be selected after the number of players has been selected.
Press the HANDICAP button to enter handicap selection mode. Then press # OF PLAYER to
select the handicap option. Press the HANDICAP button to jump to the next player. Press START
at any time to start the game. The games that use handicap mode are listed below.
1-800-225-7593
www.gldproducts.com
12
Loading...