Operation Manual
A Family Company Manufacturing In The USA Since 1969
Lettuce crisper* - Lc
countertop Merchandiser* - cM24
WaLL-Mount refrigerator* - WMr24s-L, WMr24s-r,
WMr24X-L, WMr24X-r
*This manual is specic to Lettuce Crispers, Countertop
Merchandisers, and Wall-Mount Refrigerators manufactured
beginning with SN 290188989 and on June 17, 2019 and after
CM24XX-RR
LC
Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780
800.748.0423 · 989.752.4275 · Fax 989.752.4444 · www.glastender.com
Rev. 06-18-19
WMR24S-R
© 2016 Glastender, Inc.
indeX
Topic Page
Utility Requirements and Connections ..................................................................... 2
Uncrating and Start-up Instructions .......................................................................... 2
Mounting Instructions ............................................................................................... 3
Cleaning Instructions ................................................................................................ 4
Digital Controller Operation ..................................................................................... 5
Electrical and Refrigeration Specifications .............................................................. 6
Electrical Diagram .................................................................................................... 6
Terms and Conditions .............................................................................................. 7
Warranty .................................................................................................................... 8
IMPORTANT !! Attention Service Companies IMPORTANT !!
Please review the important warranty information on page 8. If you believe a service call should be covered by
the factory, please call the factory for authorization between 8AM and 5PM EST, Monday through Friday.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
1
OM-LC-CM-WMR-02
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
introduction
This manual describes the operation features of the Lettuce Crisper, Countertop Merchandiser, and WallMount Refrigerator. Please review this information before attempting installation and operation. Long term,
trouble-free operation will follow if good housekeeping and maintenance procedures are followed. Thank you
for selecting Glastender, Inc. products.
.
utiLity requireMents and connections
Electrical: 120 Volt AC, 1 Phase, 60 Hz, 2.5 full load amps. A separate 15 amp circuit is
required. A 9-foot grounded cord is included.
Plumbing: Automatic condensate evaporator. No drain connection required.
uncrating and start-up instructions
All models are shipped in one carton. These steps should be followed:
1. If legs are included, bolt them to the base with bolts provided. Follow installation guide on
page 3.
2. For lettuce crisper and wall-mount refrigerator mounting instructions, see page 3.
3. Position unit. It must be level and plumb.
4. Plug into 120 volt AC outlet.
5. Your Glastender equipment is now ready for use.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
2
OM-LC-CM-WMR-02
Mounting instructions
WALL MOUNT BRACKET
BOTT
MOUNT
LEG MOUNTING INSTRUCTIONS:
NOTE: Mounting instruction applies to the lettuce crisper,
countertop merchandiser, and wall-mount refrigerator.
NOTE: 8″ of air space is required above unit to allow for air
flow out. WARNING: Compressor failure due to restriction or
blockage of air flow will void warranty.
1. Locate the unit on countertop in final position.
2. Level the unit (front to back and side to side).
3. Mark the countertop through the holes in the flanged foot of
the leg.
4. Drill out the marked locations and secure the unit to the
countertop using fasteners.
C
OF HOLES
L
16"
C
L
24 ¾"
16"
C
L
BOTTOM OF LETTUCE CRISPER
OM BRACKET
STUDS IN WALL
Mounting Hole
Mounting Hole
WALL MOUNTING INSTRUCTIONS:
NOTE: Mounting instruction applies to both the lettuce crisper and
wall-mount refrigerator. Lettuce crisper shown in illustration.
NOTE: 8″ of air space is required above unit to allow for air
flow out. WARNING: Compressor failure due to restriction or
blockage of air flow will void warranty.
1. Mark a level line at the bottom of the lettuce crisper / wall-mount
refrigerator.
2. From this line measure up 24¾″ and mark another level line.
3. On this line drill holes to match the holes in the wall mount
bracket.
4. Install wall mount bracket.
5. Attach lettuce crisper / wall-mount refrigerator.
6. If lettuce crisper / wall-mount refrigerator is not on an existing
shelf, secure with bottom bracket.
NOTE: At least two (2) of the mounting holes in the bracket should
line up with studs in the wall for safe, secure mounting.
MUST BE INSTALLED
HORIZONTALLY LEVEL
3
OM-LC-CM-WMR-02
WALL
BRACKET
BOTTOM
BRACKET
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
MUST BE INSTALLED
VERTICALLY PLUMB
cLeaning instructions
ESTIMATED CLEANING TIME: 5 to 10 minutes per unit daily, 20 minutes weekly.
FREQUENCY: Daily cleaning of exterior & door gaskets. Weekly cleaning of interior.
PROCEDURE:
1. A non-chlorine based cleaner or mild detergent and warm water applied with a soft cloth or sponge to all contact surfaces.
2. Immediately rinse off cleaning agent(s), using clean warm water, clean soft cloth or sponge.
3. Dry with a soft clean cloth, removing standing water as soon as possible.
4. A more thorough cleaning of the interior should be done weekly (more frequently as necessary).
5. The condensing unit air filter (front top left) should be removed and thoroughly rinsed in hot clean water at least once per quarter.
NOTES:
1. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or chlorine based cleaners on stainless steel surfaces, since they will
break down the passivity layer and allow corrosion to occur.
2. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite® pad for more stubborn stains. Always scrub with the
direction of the grain. Follow with a thorough cleaning as described above.
3. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel, if not removed.
4. Door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to premature failure, since alcohol
and moisture build-up breaks down the gasket material.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
4
OM-LC-CM-WMR-02
digitaL controLLer operation
The operating temperature range is preset at the factory
according to the table below and can be adjusted up or down
within the limits shown.
Setting the desired temperature-
To access the setpoints setup menu, press Set for 2 seconds. The
message SP will appear on the display followed by the normal
setpoint set value. Use the Increase key or Decrease key to
modify the value and conrm by pressing Set. Immediately, the
message SP-E appears indicating the setting of the economic
setpoint. Again, use the Increase key or Decrease key to modify
the value and conrm by pressing Set. Finally, the - - - -
indication signals the set up completion. The setpoints can also
be adjusted individually in the quick access menu.
Factory Settings Range of Adjustment
Set Point Operating Range† Minimum Set Point Maximum Set Point
LC, CM, WMR - Standard Cooler Setting
CM, WMR - White Wine Cooler Setting
CM, WMR - Red Wine Cooler Setting
† Adjusting the factory set point will also adjust the operating range by the same amount
34º F 34º F to 39º F 33º F 65º F
50º F 50º F to 55º F 33º F 65º F
60º F 60º F to 65º F 33º F 65º F
The lettuce crisper, countertop merchandiser, and wall-mount
refrigerator are programmed to automatically defrost four times daily
for approximately twenty minutes. During defrost, the fan inside the
cooler will remain on and the refrigeration system will turn off. The
defrost process can be activated/deactivated manually in the quick
access menu through the dEFr or pressing the Increase key for 4
seconds. Activation or deactivation will be indicated by the messages
dEFr On or dEFr OFF respectively.
The thermostat controller has an “OFF” function. The shutdown of the
control functions allows the controller to operate only as a temperature
indicator, keeping the control outputs and alarms off. The use of this
feature is enabled or disabled by the shutdown function of the control
functions. When enabled, the control functions and alarms are switched
off CtrL OFF or on Ctrl On in the quick access menu through the
CtrL option. When the control functions are off, the message OFF is
displayed alternating with the temperature and other messages. Also is
possible turn on/turn off the control functions by pressing the Increase
key for 5 seconds.
Models LC, CM24, and WMR24 -
The thermostat control probe wire
may become disconnected when the compressor compartment cover
and/or grill are removed. This will result in thermostat Err 1 or Err 3
code. Service calls to reconnect the probe wiring are not covered by
factory warranty.
signaLs
Ambient sensor disconnected or out of range.
Sensor 3 disconnected or out of range.
Operation with economic setpoint.
High ambient temberature alarm (sensor1).
Low ambient temperature alarm (sensor1).
High temperature in condenser alarm (level 1). If
this signal occurs, condenser may need cleaning.
High temperature in condenser alarm (level 2).
this signal occurs, condenser may need cleaning.
Compressor reached the maximum time on
without reaching the SP.
Control routines off.
It indicates that the temperature for end of
defrost has not been reached.
Please contact Full Gauge Controls.
Recongure the values of the functions.
If
5
OM-LC-CM-WMR-02
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
eLectricaL and refrigeration specifications
LC/WMR/CM24 11000324
The following electrical and refrigeration specifications apply:
refrigerant design pressure
eLectricaL type charge high LoW
120V, 1 Ph., 60 Hz., 2.5 AMP R290 4.23 oz. 245 130
eLectricaL diagraM
N
POWER
LI
CONTROL
1 2 3 4
FAN
RED
FAN
WMR/CM24/UCR
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
6
OM-LC-CM-WMR-02
terMs and conditions
prices:
All prices are LIST. Applicable taxes will be added.
quotations:
Unless otherwise stated, quotations are effective for 30 days only.
acceptance:
All orders are subject to acceptance by Glastender, Inc.’s headquarters in
Saginaw, Michigan. Possession of the Product Directory and Price List
is not an offer to sell.
shipMents:
F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or
Collect if shipped directly to you. Prepay and Add to Invoice freight
terms are available upon request. The approximate shipping weights of
all products are listed with the prices. Partial shipments will be made
unless otherwise specified by the customer. Surface freight classifications are:
• GT-24/GT-30/GW24 Glasswashers - Class 175
• GT-18 Glasswashers - Class 250
• All Underbar Equipment - Class 175
• Bar Die Orders – Class 250
• Portable Bars - Class 175
• Remote refrigerators (i.e., no compressor) or dry storage back bar
equipment - Class 175
• Self-contained refrigeration equipment - Class 150
• Ice Display Units (IDU and GDU) - Class 85
• Lighted Liquor Displays - Class 85
• Beer line chillers and beer towers (beverage dispensing equipment)
- Class 92.5
• Bottle Disintegration System - Class 150
• Ice Cream Freezers - Class 77.5
deLivery:
The majority of equipment is manufactured to order and typically ships
within three to six weeks after complete order information is received by
the factory. In-stock equipment typically ships within two to three days
of the factory receiving complete order information.
returns:
Items specified as “Manufactured to Order” are NOT returnable.
A Return Authorization number must be issued by the factory in
advance for any items that are returnable. The number MUST be noted
on the outside of the returned package. Returns must be received within
90 days of the issue date. Shipping charges must be prepaid. A minimum 20% restocking charge will be applied to all authorized returns if
received in new, unused condition in the original packaging.
The above conditions apply to spare part returns, except spare part
returns must be received within 30 days of original shipment for electronic or electrical parts or within 90 days for all other parts.
Loss or daMage:
For customer routed shipments, Glastender, Inc. is not responsible for
any loss, damage, or delay of merchandise during shipment. Such transit
claims must be filed with the carrier. Merchandise must be examined on
arrival. If shortages occur, Glastender, Inc. must be notified in writing
within five (5) days of delivery to honor any shortage claim. Glastender
will assume responsibility for freight claims on Prepay and Add shipments but the customer must inspect freight and note any damage upon
receipt. Failure to do so may result in losses at the customer’s expense.
custoM orders:
Custom orders must be paid in advance and are not subject to cancellation.
All small items are evaluated to see the most cost effective means for
shipment. Many small items ship via UPS or FedEx; however, when
dimensional weight is excessive, LTL carriers are the most cost effective
choice. Spare parts orders received before 1:00 PM EST can usually be
shipped the same day.
The order department is happy to assist with routing or shipping questions.
payMent terMs:
Cash should be included with all orders unless credit terms have been
arranged. To establish credit, banking and trade references are required.
A convenient credit application is available upon request. Payment via
credit card is not our normal means of receiving payment. Visa and
MasterCard will be accepted, but must be charged at the time of shipment. In addition, a payment via credit card for orders totaling more than
$500 will incur a 3% convenience fee on the total transaction amount.
LaMinates:
Some products include common, readily available plastic laminates of
the customer’s selection. There may be an additional charge if uncommon varieties are ordered.
12/14/17
7
OM-LC-CM-WMR-02
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Warranty stateMent
APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA
Glastender, Inc. warrants all products to be free of defects in material and workmanship. One-year labor and parts warranty applies to
all glasswashers, self-contained refrigeration models, and BDS model
bottle disintegration units. In established areas, a start up is included
with GT-24 and GT-30 model glasswashers. Warranty is effective for
one year from the date of installation or up to 18 months from date of
factory shipment, whichever occurs sooner. Glastender, Inc. will replace
any part or assembly found defective under normal use and service.
For warranty labor claims beyond 15 months from the date of factory
shipment, proof of date of installation or occupancy must be provided.
Authorization for labor must be obtained from Glastender within the
warranty period and prior to the service being performed.
Labor warranty applies to the United States and Canada only.
Remote refrigeration models and beer line chillers include a one-year
parts warranty only. There is no labor warranty on these products.
Field replacement parts not covered under the original warranty include
a 90-day part warranty from the date of installation.
FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY:
Glastender will warrant to the original user the compressor for all selfcontained refrigeration models for an additional four years following the
regular one-year warranty period. This plan applies to the compressor
only.
A completed warranty claim form MUST accompany all returned defective parts or assemblies. Upon request, a defective part or assembly must
be returned to Glastender, Inc., Saginaw, Michigan, with all transportation and delivery charges prepaid. Warranty repairs or replacements
will be shipped FOB factory in Saginaw, Michigan. Reimbursement for
applicable freight charges covers ground service only.
Glastender provides in-warranty repairs during a service company’s
regular working days and hours. There is no provision for payment
of a premium rate during “overtime” hours. When warranty service is
requested during other than normal working hours, the end user will be
charged the premium portion of the overtime rate.
The warranty covers substantiated travel expenses for up to 2 hours /
100 miles round trip up to a maximum of $150. Any additional costs
due to installations that require extra work, time, or travel to gain access
for service are the sole responsibility of the equipment purchaser. Any
exceptions to these travel and access limitations must be pre-approved
by a factory representative.
The warranty does not cover door gaskets, chemical tubing, pump
squeeze tubing, and/or any equipment subjected to accidents, freight
damage, alterations from the original design, improper power and/or
plumbing hookups, improper chemical use, general misuse, or lack
of routine required maintenance as determined by Glastender, Inc.
Installation, normal control adjustments, general maintenance, correcting an installation error, or service calls that reveal the unit is functioning normally will not be reimbursed under warranty.
Condenser coils on self-contained refrigeration products must be
cleaned regularly. Failure to provide adequate air flow to a refrigeration
unit will void the warranty.
Glastender shall not be liable for loss of use, revenue, or profit, or for
any other indirect, incidental, special, or consequential damage including, but not limited to, product spoilage or loss.
This warranty is conditioned upon Glastender receiving notice of any
defect subject to this warranty within sixty (60) days of its discovery
by the end user or dealer. All products are warranted only for the initial
place of installation. Removal of a product automatically terminates
this warranty.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
SECOND YEAR EXTENDED PARTS & LABOR WARRANTY:
Glastender’s one-year parts and labor warranty on self-contained refrigeration units, excluding beer line chillers, can be extended to two years
with the purchase of a two year parts and labor warranty. Specify part
number EWR2 ($150 net price) when ordering.
EXPORT WARRANTY - One year parts only.
EXCLUSION OF WARRANTIES
EXCEPT AS PROVIDED ABOVE, GLASTENDER MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OR NON-INFRINGEMENT.
LIMITATION OF REMEDIES AND DAMAGES
If Buyer makes a valid and timely claim as outlined above, Glastender’s
liability and Buyer’s remedies under this agreement will be limited solely
to labor charges authorized and/or replacement or credit, at Glastender’s
option, with respect to Products returned at Buyer’s expense within thirty (30) days after warranty repair. GLASTENDER’S LIABILITY WILL
IN NO EVENT BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE RETURNED PRODUCTS. GLASTENDER
WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,
BUT NOT LIMITED TO, LABOR COSTS EXCEPT AS COVERED
UNDER OUR WARRANTY, LOST PROFITS OR THE LOSS OF
PERISHABLE PRODUCTS RESULTING FROM THE USE OF OR
INABILITY TO USE OUR PRODUCTS OR FROM OUR PRODUCTS’
INCORPORATION INTO OR BECOMING A COMPONENT OF
ANY OTHER PRODUCT. NEITHER PARTY WILL HAVE ANY
NEGLIGENCE OR OTHER TORT LIABILITY TO THE OTHER, OR
TO ANY THIRD PARTY, ARISING FROM ANY BREACH OF THIS
AGREEMENT.
GOVERNING LAW - JURISDICTION
The terms and conditions of an order are to be governed and construed
according to the laws of the State of Michigan, without regard to conflict
of laws principles. Buyer hereby consents to the jurisdiction and venue
of the courts located in Saginaw County, Michigan.
No representative, distributor, dealer, or any other person is authorized
to modify this warranty. This warranty replaces all other written or
verbal warranties.
NOTE: Glastender, Inc.’s policy of constant quality improvement
means that prices, specifications, and policies are subject to change
without notice. Questions regarding this warranty should be directed to
Glastender’s Warranty Administrator.
04-19-17
Please review the important warranty information on this page. If you
believe a service call should be covered by the factory, please call
the factory for authorization between 8AM and 5PM EST, Monday
through Friday.
IMPORTANT!!
Attention Service Companies
8
OM-LC-CM-WMR-02
Loading...