Glastender UMRF User Manual
A family company manufacturing in the USA
T
FRONT VIEW
1-1/2"
5"
www.glastender.com
UMRF
Front View
4004503
Conforms to ANSI/NSF STD 2
UMRF
Back View
Integrated C-channel
Stiffener
03012383
Rinser Faucet
Assembly
Conforms to NSF/ANSI STD 372
4004503
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Undercounter Mount
Rinser Faucet
UMRF
Standard Features
• All 18 gauge stainless steel construction
• Pan includes radius interior corners for easy cleaning
• Total welded construction with integrated C-channel sides for
incredible rigidity
• Installation kit for plumbing 1/2" tailpiece drain - includes
10' of vinyl drain tube, (3) ty wraps, (1) elbow, (1) elbow to
drain-line adaptor, (4) #10 x 1/2 screws
• Rear deck area with pre-punched screw holes for mounting to
underside of bar top
Specications
Drain
• 1/2" tailpiece
Materials
• 18 gauge stainless steel
Faucet
• Accepts 3/8" cold water lead
• 30 psi water pressure regulator included
Installation Notes
• Important: Unit must be installed in conformance with
applicable federal, state, and local plumbing codes,
including adequate backflow when required.
• Install in-line water regulator (included).
• A separate shut-off valve is recommended (not included).
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Dimensional Information
9"
OP VIEW
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
3.41
Approval/Notes:
RIGHT SIDE VIEW
Rev. 11-10-15
Loading...