SWB-12-C
SWB-24L-C
SWB-18-DW
SWB-18-DB
Project:
Item #: Qty:
Model #:
AIA#
SIS#
Wet Waste
Sink Cabinets
SWB-12-C, SWB-18-DW, SWB-18-DB
Standard Features
• Manufactured with total welded construction to meet
NSF® standards
• All stainless steel construction
• Adjustable stainless steel bullet feet
• 9-1/4″ by 11-1/2″ by 6″ deep sink bowl with hot and cold
water gooseneck faucet
• Faucets are standard and ship mounted
• Lift-out perforated plastic wet waste strainer
• Model SWB-12-C has a cabinet base with front hinged access
door and storage space for three 1-gallon chemical containers
• Model SWB-18-DW has a cabinet base with work surface trash
chute hole and front hinged access door (stainless steel trash container, model DWC, is available as an accessory)
• Model SWB-18-DB has a drainboard work surface with recessed
wet waste sink below
• Models SWB-24L-C and SWB-24R-C include a 12″ drain
board section in the work surface and an open front cabinet
base with center vertical divider. The L or R in the model
number designates the sink location as left or right.
Specications
Drain
• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part
#8033 slipnut and part #W-573P washer.
Faucet
• Deck mount on 4″ centers, accepts 3/8″ sink leads,
hot and cold water connections required
Sink Bowl Dimensions
• 9-1/4″ by 11-1/2″ by 6″ deep
Sink Strainer
• Perforated plastic
Legs
• 1-5/8″ diameter, 16 gauge stainless steel
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel parts include: all components
unless otherwise noted
• 18 gauge stainless steel parts include: leg pads
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 08-20-09
Product Information
Wet waste sink cabinets are offered in five different 24″ deep
models. The 12″ wide chemical storage cabinet holds three
1-gallon chemical containers. The 18″ wide dry waste cabinet
holds a trash receptacle and has a 6″ round trash chute in the
work surface. The trash receptacle is not included, but a stainless steel dry waste container is available as an accessory, specify
model number DWC. The 18″ wide drainboard model includes a
drainboard work surface with recessed wet waste sink below.
The two 24″ wide models include a 12″ drainboard section with
lift-out perforated insert and open front cabinet base. A vertical
center divider allows three 1-gallon chemical containers to be
stored below the sink with the other side of the cabinet available
for additional storage. The wet waste sink may be located to the
left or right.
Approval/Notes:
3.21
Wet Waste Sink Cabinets
SWB-12-C
SWB-18-DW
SWB-18-DB SWB-24L-C
Dimensional Information
BACKSPLASH
12"
DOOR
12"
24"
37"
DRAIN
18"
DRY WASTE CHUTE
18"
30"
DRAINBOARD
WORK SURFACE
24"
PLAN VIEWS
BACKSPLASH
BEHIND SINK
19"
RECESSED WET
WASTE SINK
18" 24"
24" 24"
18"
30" 30"
24"
37"
FRONT ELEVATIONS
19"
10"
37"
30"30"
6"
24"
6"
24"
37"
17"
6"
14"
24"
37"
30"
6"
24"
37"
SIDE ELEVATIONS
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...