Glastender ST48-B User Manual
5-15P
A family company manufacturing in the USA
www.glastender.com
4004503
and UL STD 471
ST48-S
Conforms to NSF/ANSI STD 7
Certied to CSA STD C22.2 No. 120
Meets NSF 7 requirements
for closed container products
Standard Features
Project:
Item #: Qty:
Model #:
Deep-Well
Slide Top Coolers
ST__ -__
Size:
48 = 48" Two Door
60 = 60" Two Door
72 = 72" Three Door
96 = 96" Four Door
Finish Options:
BG = Black vinyl-clad steel
SFG = Stainless steel front and side
SG = All stainless steel
B = Black vinyl-clad steel
SF = Stainless steel front and sides
S = All stainless steel
AIA#
SIS#
Galvanized Steel Interior with
Stainless Steel Floor
Stainless Steel Interior
• Meets 2008 energy efficiency standards
• Self-contained refrigeration
• Automatic defrost cycle
• Radius interior corners for easy cleaning
• Perfect exterior dimensions: 24″ front to back and 48″,
60″, 72″, or 96″ left to right
• Foamed-in-place insulation, CFC free
• Two interior options: galvanized steel walls and stainless
steel floor or all stainless steel
Specications
Electrical
• 120V, 1 phase, 60 Hz
• ST48 - 5.8 full load amps
• ST60, ST72, ST96 - 6.5 full load amps
• Dedicated 15 amp circuit is recommended
• Includes a 6-foot NEMA 5-15P grounded
cord & plug which exists the left rear of
the refrigeration compartment
• Refrigeration
• 1/4 HP, R134a refrigerant
• BTU/hr heat rejection:
ST48 - 2,375 BTU/hr
ST60, ST72, ST96 - 2,661 BTU/hr
• Operating range: 30ºF (-1ºC) to 40ºF (4ºC)
• Fin & tube evaporator with forced air circulation
Plumbing
• Automatic condensate evaporator. No drain connection
required
Partitions
• ST48 includes three vertical wire partitions
• ST60 includes three vertical wire partitions
• ST72 includes four vertical wire partitions
• ST96 includes five vertical wire partitions
G
W
• Three exterior options: black vinyl-clad steel, stainless steel
front & sides, or all stainless steel
• Six foot grounded cord & plug included (exits left rear)
• Optional 3-3/4″ casters or 6″ legs are available
• Automatic condensate evaporator - no drain connection
required
• One-piece integral top and mullion design
• Door locks
Capacity
• 48″ model = 327 long neck bottles (13.63 cases)
• 60″ model = 475 long neck bottles (19.82 cases)
• 72″ model = 594 long neck bottles (24.75 cases)
• 96″ model = 772 long neck bottles (32.17 cases)
Legs
• Optional 6″ legs, specify accessory #STLS-4 (ST48) or
#STLS-6 (ST60, ST72, ST96)
• 1-5/8″ diameter
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel series parts include: top, door, interior floor, back*, front*, and sides* (*if all stainless finish is
specified)
• 20 gauge black vinyl-clad steel parts include: front and sides
(if black vinyl-clad steel body finish is specified)
• 22 gauge stainless steel parts include: interior walls (if stainless interior is specified)
• 22 gauge galvanized steel parts include: interior walls (if gal-
vanized steel interior is specified) and back
• 16 gauge stainless steel parts include: legs* (* if specified)
• 16 gauge galvanized steel parts include: base
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 08-01-16
4.34
Approval/Notes:
Deep-Well Slide Top Coolers
TYPICAL END VIEWS
Dimensional Information
11 5/16"
12 11/16"
Model A B C No. of
ST48 48″ 39″ 31″ 2
ST60 60″ 39″ 43″ 2*
ST72 72″ 63″ 55″ 3
ST96 96″ 87″ 79″ 4
*NOTE: The ST60 has one large door and one standard door
A
6' GROUNDED
CORD AND PLUG
HERE
34 1/2"
24"
PLAN VIEW FRONT ELEVATION
REFRIGERATION COMPARTMENT
13"
A
B
COIL
Doors
13"
C
27 3/4"
7/8"
24"
20"
14 1/4"
3"
13 1/2"
Standard Base
COIL
2-1/2"
29 1/4"
2 3/4"
34 1/2"
24"
Optional Casters
3-3/4"
38 1/4"
24"
40 1/2"
6"
Optional 6" Legs
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...