Glastender ST24-B User Manual

5-15P

A family company manufacturing in the USA

www.glastender.com

4004503

ST24-SF

Conforms to NSF/ANSI STD 7 and UL STD 471

Certied to CSA STD C22.2 No. 120

Meets NSF 7 requirements for closed container products

Standard Features

Project:

Item #: Qty:

Model #:

Shallow-Well

Slide Top Coolers

ST__ -__

Size:

24 = 24" One Door
36 = 36" One Door

Finish Options:

BG = Black vinyl-clad steel
SFG = Stainless steel front and side
SG = All stainless steel

B = Black vinyl-clad steel
SF = Stainless steel front and sides
S = All stainless steel

AIA#

SIS#

Galvanized Steel Interior with
Stainless Steel Floor

Stainless Steel Interior

• Meets 2008 energy efficiency standards

• Self-contained refrigeration

• Automatic defrost cycle

• Radius interior corners for easy cleaning

• Perfect exterior dimensions: 24″ front to back and 24″ or

36″ left to right

• CFC free foamed-in-place insulation

• Two interior options: galvanized steel walls and stainless
steel floor or all stainless steel

Specications

Electrical

• 120V, 1 phase, 60 Hz, 3.7 full load amps

• Dedicated 15 amp circuit is recommended

• Includes a 6-foot NEMA 5-15P grounded

cord and plug which exists the left rear of
the refrigeration compartment

Refrigeration

• 1/8 HP, R134a refrigerant

• Operating range: 30ºF (-1ºC) to 40ºF (4ºC)

• Fin & tube evaporator with forced air circulation

• 2,375 BTU/hr heat rejection

Plumbing

• Automatic condensate evaporator. No drain connection
required

Partitions

• ST24 includes one vertical wire partition

• ST36 includes two vertical wire partitions

G

W

• Three exterior options: black vinyl-clad steel, stainless steel
front & sides, or all stainless steel

• Six foot grounded cord & plug included (exits left rear)

• Optional 3-3/4″ casters or 6″ legs are available

• Automatic condensate evaporator - no drain connection
required

• One-piece integral top design

• Door lock

Capacity

• 24″ model = 116 long neck bottles (4.83 cases)

• 36″ model = 174 long neck bottles (7.25 cases)

Legs

• Optional 6″ legs, specify accessory #STLS-4

• 1-5/8″ diameter

• Stainless steel bullet feet

Materials

• 20 gauge stainless steel parts include: top, door, interior
floor, back*, front*, and sides* (*if all stainless finish is

specified)

• 20 gauge black vinyl-clad steel parts include: front and sides
(if black vinyl-clad steel body finish is specified)

• 22 gauge stainless steel parts include: interior walls (if stain­less interior is specified)

• 22 gauge galvanized steel parts include: interior walls (if

galvanized steel interior is specified) and back

• 16 gauge stainless steel parts include: legs* (* if specified)

• 16 gauge galvanized steel parts include: base

Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]

www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA Rev. 08-01-16

4.33

Approval/Notes:

Shallow-Well Slide Top Coolers

Dimensional Information

6' GROUNDED
CORD AND PLUG
HERE

Model A B No. of

Doors

ST24 24″ 20″ 1

ST36 36″ 32″ 1

A

19 1/4"

11 5/16"

12 11/16"

24"

20"

A

COIL

19 3/4"

34 1/2"

24"

PLAN VIEW FRONT ELEVATION

2-1/2"

13"

COIL

22 1/2"

3"

34 1/2"

REFRIGERATION COMPARTMENT

24"

38 1/4"

B

13"

24"

40 1/2"

7/8"

Standard Base

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

9 1/2"

Optional Casters

TYPICAL END VIEWS

3-3/4"

6"

Optional 6" Legs

Printed in USA