Glastender SSR-24, DSR-24 General Manual
DSR-24
SSR-24
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Speed Rails &
Locking Covers
(model numbers on reverse side)
Standard Features
• All stainless steel construction
• Open step-and-rail design for easy cleaning and better view of
bottles
• Radius corners on steps and rails for easy cleaning
• ABS sound deadening covers
• Long underbar skirt allows speed rails to mount low enough
that bottles do not rise above deck surface and inhibit workflow
• Single and double step models
• Locking covers are available (see reverse side for model
numbers)
• Locking covers for single speed rails include built-in
hangers when ordered with original equipment
• Availableincustomlengthsupto84″
• Rails have a clear snap-on liquor identification label cover
storage
Specications
Materials
• 20 gauge stainless steel parts include: steps,
rails, and locking covers
• 14 gauge stainless steel parts include: ends
• ABS step and rail covers
SSR-36 with
SSRC-36 installed
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
3.32
SSR-36 with SSRC-36
in storage below
Approval/Notes:
Rev.11-06-07
LOCKING SPEED RAIL
COVER HANGER AVAILABLE
WITH SINGLE SPEED RAIL ONLY
PLAN VIEW
FRONT ELEVATION
SIDE ELEVATION
SSR-__ SSRC-__
DSR-__
DSRC-__
Single Speed Rails are available in one inch increments from 12" to 84" in
length. The model number designation is SSR- X , where X = the length of the
unit in inches. Speed rails over 42" also have a center support.
ABS PLASTIC COVER
OVER STAINLESS STEEL
"C" CHANNEL
J-HOOK
SPEED RAIL
LOCKING COVER
Single Speed Rail Locking covers are available in one inch
increments from 12" to 42". The model number designation is
SSRC- X , where X = the length of the unit in inches. Use multiple
covers for speed rails longer than 42". (NOTE: 24" and 29" deep
Liquor Displays require multiples of four and five locking covers,
respectively)
J-HOOK
LOCKING COVER
SPEED RAIL
Double Speed Rails are available in one inch increments from 12" to 84" in length.
The model number designation is DSR- X , where X = the length of the unit in
inches. Double speed rails over 42" also have a center support.
Double Speed Rail Locking covers are available in one inch
increments from 12" to 42". The model number designation is
DSRC- X , where X = the length of the unit in inches. Use
multiple covers for speed rails longer than 42". (NOTE: Double
speed rail locking covers are actually just two single speed rail
locking covers.)
13 7/8"
6 13/16"
3 3/8"
13 7/8"
6 13/16"
3 3/8"
6"
4"
8 1/4"
5"
5"
X
8 1/4"
4"
4"
2"
10 1/2"
10"
6"
10"
18"
10 1/2"
PLAN VIEW
FRONT ELEVATION
SIDE ELEVATION
Speed Rails and Locking Covers
Dimensional Information
X
X
X
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
X
Printed in USA
Loading...