Glastender PT48L-BN-LL-RR User Manual
A family company manufacturing in the USA
www.glastender.com
Project:
Item #: Qty:
Model #:
Pass-Thru Coolers
Four, Six and
Eight Door Remote
PT__ _ -_ _ (__/__)
AIA#
SIS#
PT48L-SN(LL/RR)
4004503
Conforms to NSF/ANSI STD 7 and UL STD 471
Certied to CSA STD C22.2 No. 120
Meets NSF 7 requirements for open food storage
Standard Features
• Remote unit
• All stainless steel interior with radius corners is easy to
keep clean
• Locking door(s)
• LED interior lighting
Specications
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• 14 gauge wire connection is made inside the cooler next to
evaporator housing - interior access is through one of the 3/4″
side knock-out holes (electrician’s choice)
Refrigeration
• R134a* or R404a* expansion valve & temperature control
included. Specify type required when ordering.
• Refrigeration system capacity requirements*:
PT48 - 1,970 BTU/hr
PT72 - 2,500 BTU/hr
PT96 - 3,030 BTU/hr
* BTU/hr design loads are figured assuming 85° F ambient,
all glass doors, maximum internal loading, and average compressor cycling. No solar heat gain has been accounted for.
• All refrigeration hookups are made at the installation site
Plumbing
• A ten foot length of 1/2″ ID by 5/8″ OD plastic tubing is provided to drain condensate. The tubing should exit through one of
the 3/4″ side knock-out holes (installer’s choice). The maximum
drainage is one ounce per hour - consult local codes for compliance - a floor drain may be required
Size:
48 = 48" Four Door
72 = 72" Six Door
96 = 96" Eight Door
Refrigeration
Hook-Up Location:
L = Left or R = Right
† Specify a hinge location for each door
Door Hinge Location†:
(from left to right)
L = Left or R = Right
Top Style:
N = No finished top
L = Laminated
S = Stainless
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
• Available without a finished top for integrated installation
below customer supplied counter top
• 180° swinging doors
• Leg sockets recessed into base
Shelving
• Two adjustable coated shelves and one bottom coated rack per
door included
Materials
• Stainless steel parts include: interior, front of cabinet, hinges, hinge
and lock brackets, and optional legs
• Black vinyl-clad steel parts include: standard sides and doors
• Galvanized steel parts include: exterior sub-top and bottom
• Zinc plated CR steel parts include: leg sockets
Weight Bearing Capacity
• Counter tops and other accessories should not exceed 200 pounds
per door
Capacities PT48 PT72 PT96
• 12 oz. bottles, cases 17.6 28.3 39.1
• 750ml wine bottles* 156 253 350
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 01-20-17
4.09
Approval/Notes:
Remote Pass-Thru Coolers
PLAN VIEW
Use Model Number Key to specify
Dimensional Information
29-3/4"
OPENING
9"
5-5/8"
FRONT VIEW
DOOR
X
Y
EVAPORATOR
HOUSING
24"
18-1/2"
DOOR SILL TO
DOOR SILL
180° SWING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
35"
NOTE:
Available with refrigeration
hook-up location left or right.
location when ordering.
2"
SWING WILL
CONTINUE IF
NO CABINET
TO IMPEDE
Model X Y DOORS
PT48 36″ 44″ 2
PT60 72″ 68″ 3
PT84 96″ 92″ 4
20"
SIDE VIEWS
ADD 1" TO HEIGHT
FOR FACTORY
EVAPORATOR
HOUSING
30-3/4"
STANDARD CABINET WITH OPTIONAL 6" LEGS
INSTALLED TOP
28"
7"
23-3/4"
25-1/2"
35"
22-3/4"
180° SWING 180° SWING
73-1/2"
28"
22-1/2"
22-3/4"
6"
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...