Glastender MXS60-CP10 User Manual
A family company manufacturing in the USA
www.glastender.com
MXS72-CP10
MXS60-CP10
All faucets are NSF/ANSI 61, Annex G
low lead compliant
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Mixology Stations
MXS60-CP10, MXS72-CP10
Standard Features
• All stainless steel construction.
• Complete line up is ush at 24" deep to match adjacent underbar.
• The SMHA-4 soda manifold housing is designed to house the
manifold of Wunder-Bar® or Schroeder America™ 8 to 14
button soda guns.
• The condiment well and ice bin are foamed-in-place insulated
and include a PVC plastic breaker strip around the liner to
prevent thermal transfer so ice lasts longer.
• The ice bin includes a built-in ten circuit cold plate, sliding
stainless steel cover, and stainless steel ice bin divider.
• The condiment well provides ice-chilled storage for six pintsize (16 oz.) condiment cups and includes two lift-off stainless
steel covers.
• A single speed rail is included.
• The MFT-20 model mixology unit includes a push-down rinser
faucet to rinse shaker cans, a lift-out perforated plastic sink
strainer, a 6ʺ diameter seamless welded draining dipper well
and faucet for mixology tools, an 8ʺ x 11ʺ cutting board that is
securely mounted but easily removable for cleaning, and an ice
scoop well.
• The MXS72-CP10 model also includes an elixir bottle well
with BRM15 stainless steel rack to hold 15 elixir bottles
(NOTE: Recommend Tablecraft 916 (16 oz.) or 9085 (8.5 oz.)
olive oil bottles)
To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Specications
Drains
• Elixir bottle well (model MXS72-CP10 only): 1-1/2ʺ
tailpiece
• Ice bin with coldplate: 3/4ʺ MPT
• Condiment well: 1-1/2ʺ tailpiece
Drain for Sinks and Dipper Wells
• 1-1/2ʺ I.P.S. Threaded drain will t Dearborn part
#8033 slipnut and part #W-573P washer.
Backsplash Faucet
• Backsplash mounted on 4ʺ centers, accepts 3/8ʺ sink
leads, hot and cold water connections required
Dipper Well Faucet
• Accepts 3/8ʺ cold water lead
Rinser Faucet
• Accepts 3/8ʺ cold water lead
• 30 psi water regulator included
Sink Bowl Dimensions
• 9-1/4ʺ by 11-1/2ʺ by 6ʺ deep
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
Sink Strainer
• Perforated plastic
Ice Capacity (Main Ice Bin)
• 67 pounds
Ice Bin Cover
• Two-piece sliding cover, 20 gauge stainless steel
Ten Circuit Cold Plate
• Connection is 5/16ʺ O.D. stainless steel tubing with swaged
end
Liner Depth
• 10-1/2ʺ
Legs
• 1-5/8ʺ diameter 16 gauge stainless steel
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel
• 14 gauge stainless steel parts include: speed rail ends
• PVC plastic breaker strip around opening of ice bin liner
and on speed rail
Approval/Notes:
3.48
Rev. 02-11-16
Mixology Stations
PLAN VIEWS
Dimensional Information
BRM15 STAINLESS
STEEL ELIXIR
BOTTLE RACK
4"
19"
SMHA-4 SODA
MANIFOLD HOUSING
CBA-48-CP10
COMBO ICE BIN
(LESS BOTTLE RACKS)
72"
IBD-H-A ICE
BIN DIVIDER
SSR-52 SINGLE
SPEED RAIL
72"
CCD6-12
SIX-CUP ICE-CHILLED
CONDIMENT DISPENSER
20"48"
MFT-20
MIXOLOGY UNIT
FRONT ELEVATIONS
37"
CBA-36R-CP10
COMBO ICE BIN
(LESS BOTTLE RACKS)
4"
BIN DIVIDER
SMHA-4 SODA
MANIFOLD HOUSING
IBD-H-A ICE
SSR-40 SINGLE
CCD6-12
SIX-CUP ICE-CHILLED
CONDIMENT DISPENSER
60"
20"36"
24"
MFT-20
MIXOLOGY UNIT
SPEED RAIL
60"
MXS72-CP10
Rinser Faucet Installation Notes
• Important: Unit must be installed
in conformance with applicable
federal, state, and local plumbing
codes, including adequate backflow
when required.
• Install in-line water regulator
(included).
• A separate shut-off valve is
recommended (not included).
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Conforms to NSF/ANSI STD 372
03012383
Rinser Faucet
Assembly
4004503
MXS60-CP10
30"
LEFT SIDE
ELEVATION
NOTE: THE SODA MANIFOLD HOUSING HAS
AN OVERALL HEIGHT OF 34"
RIGHT SIDE
ELEVATION
16"
37"
16"
Printed in USA
Loading...