Glastender MFV24, MFV24-SS-R User Manual
Project:
Item #: Qty:
Model #:
Reach-in Mug Chiller
One Door Self-contained
MFV24-_ _ (_)
AIA#
SIS#
Specications
MFV24-SS(R)
Door Style:
B = Black vinyl clad
U = Unlaminated
L = Laminated
S = Stainless
Door Hinge Location:
L = Left or R = Right
Top Style:
N = No finished top
L = Laminated
S = Stainless
Standard Features
• Self-contained
• All stainless steel interior construction
• CFC free foamed-in-place insulation
• Galvanized steel sub-top
• Black vinyl-clad steel exterior front and sides
• Six foot grounded cord provided (exits at rear)
• Stainless steel die cast handle
• Two Defrost Cycles: automatic - occurs every six hours without
affecting normal operation, manual - user selected for complete
six-hour defrost with automatic restart
• Stainless steel evaporator housing with separate removable
evaporator drain pan
• Automatic condensate evaporator
• Bottom rack and two shelves
• 180º swinging door
Electrical
• 120V, 1 phase, 60 Hz, 6.7 full load amps
• Dedicated 15 amp circuit is required
• Includes a 6 foot grounded cord and plug which exits the
back of refrigeration compartment
Refrigeration
• 1/3 HP high, R404A refrigerant
Operating Range
• 0ºF to 35ºF
Plumbing
• Automatic condensate evaporator. No drain connection
required
Shelving
• Bottom rack and two shelves included
Capacity
• 105 10-oz mugs
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
4.18
Legs
• 1-5/8″ diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls,
ceiling, front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides, standard
door, and compressor compartment housing
• 22 gauge galvanized steel parts include: exterior sub-top
and back
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 12 gauge stainless steel parts include: hinges,
hinge brackets, and lock brackets
Approval/Notes:
Rev.08-17-09
Reach-In Mug Chiller
Dimensional Information
PLAN VIEW
24"
20"
EVAPORATOR
HOUSING
COMPRESSOR
COMPARTMENT
7-3/4"
2"
180° SWING
FRONT VIEW
DOOR
OPENING
21"
20"
24"
35"
SWING WILL CONTINUE IF
NO CABINET TO IMPEDE
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
SIDE VIEWS
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
25-1/4"
6-3/4"
6-3/4"
25-1/2"
6-3/4"
24"
STANDARD CABINET
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
EVAPORATOR
HOUSING
9-1/2"
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
25-1/4"22-3/4"
180°
SWING
WITH OPTIONAL 6" LEGS
22-1/2"
35"
6"
21-1/4"
Printed in USA
Loading...