Glastender MFV24-BL-L User Manual
A family company manufacturing in the USA
5-15P
www.glastender.com
Project:
Item #: Qty:
Model #:
Reach-in Mug Frosters
One & Two Door
Self-contained
MFV__-_ _ (__)
AIA#
SIS#
MFV48-SS(LR)
MFV24-SS(L)
Conforms to NSF/ANSI STD 7
4004503
and UL STD 471
Certied to CSA STD C22.2 No. 120
Size:
24 = 24" One Door
48 = 48" Two Door
Door Style:
B = Black vinyl clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
Door Hinge Location:
(from left to right)
L = Left or R = Right
Top Style:
N = No finished top
L = Laminated
S = Stainless
Standard Features
• Self-contained high capacity refrigeration system
• Digital thermostat control with automatic defrost is easily visible
• Removable refrigeration module for easy maintenance
• All stainless steel interior
• Bottom rack and two adjustable shelves per door
• Includes LED interior lights with on/off switch
• Completely front venting - can be built into a back bar or used
as a free standing unit
• Galvanized steel sub top (available with stainless steel or laminated finished top)
• Stainless steel sides
• Automatic condensate evaporator
• Foamed-in-place insulation
• Six foot grounded cord and plug (exits at rear)
• Stainless steel die cast handle with lock
• 180° swinging doors
• Optional 3-3/4″ casters or 6″ legs are available
Specications
Electrical
• 120V, 1 phase, 60 Hz, MFV24 - 5.0 full load amps, MFV48 - 5.5
full load amps
• Dedicated 15 amp circuit is required
• Includes a 6 foot NEMA 5-15P grounded cord and plug
which exits the back of refrigeration compartment
Refrigeration
• 1/5 HP, R404A refrigerant
Operating Range
• 0ºF (-18ºC) to 35ºF (2ºC)
Plumbing
• Automatic condensate evaporator. No drain connection required
Shelving
• Bottom rack and two shelves included
Capacity
• 10-oz mugs: MFV24 - 108, MFV48 - 252
• 6" high pint glass: MFV24 - 75, MFV48 - 180
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
G
W
4.18
Legs
• Optional 6″ legs, specify accessory #CLS-4
• 1-5/8″ diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls, ceiling,
front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: standard door(s), and
compressor compartment cover
• 22 gauge galvanized steel parts include: exterior sub-top and back
• 20 gauge stainless steel parts include: sides and optional top
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 12 gauge stainless steel parts include: hinges, hinge brackets, and
lock brackets
Approval/Notes:
Rev. 08-01-16
Reach-In Mug Froster
ADD 1" TO HEIGHT FOR
ADD 1" TO HEIGHT FOR
ADD 1" TO HEIGHT FOR
ADD 1" TO HEIGHT FOR
Dimensional Information
MFV24
MFV48
25 1/4"
17 5/8"
48"
44"
24"
20"
17 5/8"
Plan View
FACTORY INSTALLED TOP
DOOR
OPENING
2"
COMPRESSOR
COMPARTMENT
21"
20"
35"
Front Elevation
FACTORY INSTALLED TOP
DOOR
OPENING
2"
21"
20"
35"
Side View All Models
FACTORY INSTALLED TOP
25 1/4"
21"
17 5/8"
24"
Plan View
48"
180°
SWING
COMPRESSOR
COMPARTMENT
FACTORY INSTALLED TOP
25 1/4"22 3/4"
1 1/8"
35"
Front Elevation
Model Capacity:
10 oz. mug /
6" high pint
glass
MFV24 108 /
75
MFV48 252 /
180
Refrigeration:
H.P. /
Refrigerant /
Heat Rejection
(BTU/Hr)
1/5 H.P. /
R404A /
2,047 BTU/hr
1/5 H.P. /
R404A /
2,252 BTU/hr
Voltage Amps
120v /
60 Hz /
5.0 full
load
1 phase
120v /
60 Hz /
5.5 full
load
1 phase
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...