Glastender MFT-20 User Manual
A family company manufacturing in the USA
www.glastender.com
MRS-12
MTS-14
Backsplash faucets are NSF/ANSI 61,
Annex G low lead compliant
Project:
Item #: Qty:
Model #:
Mixology Units
MRS-12, MTS-14, MFT-8, MFS-12, MFT-20
MFS-12
4004503
Conforms to ANSI/NSF STD 2
Certied to CSA/CAN STD B45.4
MFT-20
AIA#
SIS#
Standard Features
• Manufactured with total welded construction to meet NSF®
standards.
• All stainless steel construction.
• One-piece seamless top and backsplash featuring 1/4″ radius
corners for easy cleaning.
MFT-8
• Adjustable stainless steel bullet feet (does not include MFT-8).
• MRS-12 model - faucet is standard and ships mounted.
Includes push-down rinser faucet to rinse shaker cans and a
lift-out perforated plastic sink strainer.
• MTS-14 model - faucet is standard and ships mounted.
Includes push-down rinser faucet to rinse shaker cans, a
lift-out perforated plastic sink strainer, and a 6″ diameter
seamless welded draining dipper well and faucet for
mixology tools.
• MFT-8 model - includes push-down rinser faucet to rinse
shaker cans, a 6″ diameter seamless welded draining dipper
well and faucet for mixology tools, and a 7-1/2″ x 7-1/2″ cut-
ting board that is securely mounted but easily removable for
cleaning. NOTE: No legs. Must mount to adjacent underbar.
• MFS-12 model - faucet is standard and ships mounted.
Includes a lift-out perforated plastic sink strainer, and an
8″ x 11″ cutting board that is securely mounted but easily
removable for cleaning.
• MFT-20 model - faucet is standard and ships mounted.
Includes push-down rinser faucet to rinse shaker cans, a lift-
out perforated plastic sink strainer, a 6″ diameter seamless
welded draining dipper well and faucet for mixology tools,
an 8″ x 11″ cutting board that is securely
removable for cleaning, and an ice scoop well.
To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 11-12-15
mounted but easily
3.47
Specications
Drain for sinks and dipper wells
• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part #8033
slipnut and part #W-573P washer.
Backsplash Faucet
• Backsplash mounted on 4″ centers, accepts 3/8″ sink
leads, hot and cold water connections required
Dipper Well Faucet (on MFT-8, MTS-14, & MFT-20 models)
• Accepts 3/8″ cold water lead
Rinser Faucet (on MRS-12, MTS-14, MFT-8, & MFT-20 models)
• Accepts 3/8″ cold water lead
• 30 psi water pressure regulator included
Sink Bowl Dimensions (MFT-8 does not include a sink)
• 9-1/4″ by 11-1/2″ by 6″ deep
Legs (MFT-8 has no legs, must mount to adjacent underbar)
• 1-5/8″ diameter, 16 gauge stainless steel
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel parts include: all components
unless otherwise noted
Approval/Notes:
NOTE: MFT-8 model has no
accommodation for legs and
must be mounted to at least one
adjacent piece of underbar.
24”
24"
30"
8"
Mixology Units
Dimensional Information
MFT-8
21"
24"
14"
7-1/2″ x 7-1/2″ CUTTING BOARD
PLAN VIEW
NOTE: MFT-8 model has no accommodation for legs and
must be mounted to at least one adjacent piece of underbar.
MTS-14
PLAN VIEW
FRONT
ELEVATION
14"
SIDE
ELEVATION
24"
FRONT
ELEVATION
24"
30"
MRS-12
12"
PLAN VIEW
FRONT
ELEVATION
SIDE
ELEVATION
37"
30"
SIDE
ELEVATION
37"
5.4858"
MFS-12 MFT-20
12"
PLAN VIEW
FRONT
ELEVATION
8″ x 11″ CUTTING BOARD 8″ x 11″ CUTTING BOARDICE SCOOP WELL
Rinser Faucet Installation Notes
• Important: Unit must be installed
in conformance with applicable
federal, state, and local plumbing
codes, including adequate backflow
when required.
• Install in-line water regulator
(included).
• A separate shut-off valve is
recommended (not included).
03012383
Rinser Faucet
Assembly
Conforms to NSF/ANSI STD 372
4004503
20”
PLAN VIEW
37”
FRONT
ELEVATION
MFS-12 MFT-20
37"
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
SIDE ELEVATION
Printed in USA
Loading...