Glastender MF24, MF24-B1 User Manual
A family company manufacturing in the USA
5-15P
Project:
Item #: Qty:
Model #:
Mug Frosters
MF__ -__ __
AIA#
SIS#
4004503
and UL STD 471
MF36-B2
Conforms to NSF/ANSI STD 7
Certied to CSA STD C22.2 No. 120
Standard Features
• Self-contained refrigeration
• All stainless steel interior construction with radius
corners for easy cleaning
• Perfect exterior dimensions: 24″ front to back and
24″, 36″, or 48″ left to right
• CFC free foamed-in-place insulation
• Two Defrost Cycles:
1. Adaptive automatic - occurs as necessary every four
to ten hours without affecting normal operation
2. Manual - user selected for complete six-hour defrost
with automatic restart
Specications
Electrical
• 120V, 1 phase, 60 Hz, 6.1 full load amps
• Dedicated 15 amp circuit is recommended
• Includes a 6-foot NEMA 5-15P grounded
cord and plug which exits the left rear of the
refrigeration compartment
Refrigeration
• 1/3 HP, 404A refrigerant
• 2,498 BTU/hr heat rejection
• Operating range: 0ºF (-18ºC) to 35ºF (2ºC)
• Fin & tube evaporator with forced air circulation
Plumbing
• Interior floor drain and condensate drain to automatic
evaporator. No drain connection required
W
Size:
24 = 24" One Door
36 = 36" One Door
48 = 48" Two Door
B = Black vinyl-clad steel
SF = Stainless steel front and sides
S = All stainless steel
Shelving Options:
(Bottom rack standard)
1 = One layer
2 = Two layers
Finish Options:
• Optional 3-3/4″ casters or 6″ legs are available
• Three exterior options: black vinyl-clad steel, stainless steel
front & sides, or all stainless steel
• Three shelving options: standard (bottom), one additional
layer, or two additional layers
• Six-foot grounded cord & plug included (exits left rear)
• Automatic condensate evaporator - no drain connection
required
• One-piece integral top and mullion design
Capacity
• 24″ Model: 105 10-oz mug total capacity; 41 bottom shelf, 41
middle shelf, 23 top shelf
G
• 36″ Model: 175 10-oz mug total capacity; 64 bottom shelf, 64
middle shelf, 47 top shelf
• 48″ Model: 252 10-oz mug total capacity; 90 bottom shelf, 90
middle shelf, 72 top shelf
Legs
• Optional 6″ legs, specify accessory #MFLS
• 1-5/8″ diameter
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel parts include: top, door, interior floor,
front*, and sides* (*if all stainless finish is specified)
• 20 gauge black vinyl-clad steel parts include: sides and front
(if black vinyl-clad steel exterior is specified)
• 22 gauge stainless steel parts include: interior walls
• 22 gauge galvanized steel parts include: back
• 16 gauge stainless steel parts include: legs* (* if specified)
• 16 gauge galvanized steel parts include: base
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 08-01-16
4.35
Approval/Notes:
TYPICAL END VIEWS
Mug Frosters
Dimensional Information
11 5/16"
12 11/16"
A
6' GROUNDED
CORD AND PLUG
HERE
19 1/4"
34 1/2"
24"
PLAN VIEW FRONT ELEVATION
DIGITAL CONTROLLER
Model A B No. of
MF24 24″ 20″ 1
MF36 36″ 32″ 1
MF48 48″ 44″ 2
A
COIL
19 3/4"
B
Doors
24"
20"
COIL
6"
19 1/4"
7/8"
7 3/4"
6"
6"
Standard Base
Showing Optional Shelving
2-1/2"
22 1/2"
9-1/2"
34 1/2"
24"
Optional Casters
38 1/4"
3-3/4"
24"
40 1/2"
6"
Optional 6" Legs
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...