Glastender MD General Manual
Modular Bar Die shown with underbar line-up.
Millwork bar top and front panels are not included.
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Modular Bar Die
MD
Standard Features
• 16 gauge galvanized steel structure with stainless steel bartender
side finishing
• GFI outlets built in to bar die wall based on customer preference
• Fluorescent lights built in to bar die wall above underbar equipment
• Built in chaseways for beer, soda, plumbing, and electrical lines.
• Stainless steel from floor to bar top on bartender side
• Floor can be sealed to the bar die to prevent moisture from seeping from the bartender side to the customer side of the bar
• Galvanized steel structure will not rot
• Built in chaseways hide beer, soda, plumbing, and electrical
lines for a cleaner, more attractive bar
• Arrives pre-assembled from factory in sections up to 10 feet
long for easy installation - lowers installation costs. Just bolt the
sections together, level, and attach the floor
• Pre-engineered to exact dimensions to ensure a precise fit
• Can be used in conjunction with removable front millwork finishing panels to provide easy access to soda, beer, plumbing,
and electrical lines for future modification, maintenance,
or repair
• Millwork bar top and front panels can be pre-fabricated and easily
attached
• Eliminates all underbar legs for easy cleaning.
Specications
Interior Finish
• 20 gauge stainless steel
Sub-structure
• 16 gauge galvanized steel
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
3.35
Product Information
With the Glastender Modular Bar Die, underbar equipment is
mounted to and supported on the bar die. All the underbar equipment is pre-assembled and mounted to the bar die at the factory,
then broken down into shippable sections. Installation of the bar
die is very simple - easier than a conventional style underbar with
a millwork bar die. The result is a beautiful, innovative underbar
line up that is sealed to the floor, stainless from floor to bar top,
eliminates all underbar leg sets, and hides the soda, beer, electrical, and plumbing lines.
Approval/Notes:
Rev. 03-25-08
Modular Bar Die
NOTE: Duplex outlets are positioned 12"
A.F.F. to the center of the outlet. It is the
customer's responsiblity to verify the
height, size, and location of any and all
duplex outlets prior to fabrication, making
sure they meet local building and electrical
codes. Glastender must be notified of any
deviations from standard. Glastender is
not responsible for any modifications
required in the field.
There are three types of Modular Bar Die: flat wall, pedestal base, and
cabinet base. Rough-in space varies with the type of base. Flat wall
sections occur where there is no equipment or where the equipment is
removable (glasswashers, coolers, mug frosters, etc.). Pedestal bases
are the most common since they are used for standard underbar that is
normally on 16" legs. Cabinet style underbar equipment, typically on 6"
legs, will receive a cabinet style base.
Modular Bar Die orders include an
installation "foot print" which shows the
dimensions of the bar die as it touches the
floor. The foot print drawing is used as a
reference in the field for placement of soda,
beer, plumbing, and electrical rough-ins prior
to delivery of the equipment.
FLAT WALL
BAR DIE
Pedestal Base End View
13-1/8"
5-9/16"
Flat Wall End View
5-9/16"
16"
6-11/16"
41"
30"
41"
41"
Cabinet Base End View
5-9/16"
6-11/16"
30"
6"
20-9/16"
NOTE: Individual section shown for
illustrative purposes. Actual orders
are shipped pre-assembled in
sections up to ten feet long.
Pedestal Base Area:
Optimum place to stub up
electrical, soda, and plumbing lines.
Flat Wall Area:
Secure the bar die to the floor
using the 1/4" holes in the bottom plate.
Cabinet
Base Area
5"
Ø3-1/2"
Ø1-3/8"
Ø
5"
PEDESTAL BASE
CABINET BASE
Dimensional Information
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...